Catalog
Sorting:
SIL 100 high temperature silicone hose for pharmaceutical and cosmetic industries
The industrial silicone hose SIL 100 is resistant to extreme temperatures, ozone, radiation, humidity, deformation, weather and chemical influences. Suitable for use in the cosmetic and pharmaceutical industries.
SKU: SIL1006X3 - SIL10025X4
SIL 200 reinforced silicone hose for pharmaceutical and cosmetic industries
Textile-reinforced, high pressure resistant silicone hose. Can be used in the cosmetic, pharmaceutical and biotech industries.
SKU: SIL20010X6 - SIL200102X6.5
SIL 300 reinforced silicone hose for the cosmetic and pharmaceutical industries
Silicone hose with heat-resistant textile reinforcement for use in the cosmetic and pharmaceutical industries. Suitable for extreme temperatures (-60 °C - +200 °C).
SKU: SIL30013X6 - SIL300102X7.5
SulfaVer 4 reagent for the determination of sulfate 2 - 70 mg/L SO4
Hach powder reagent for the determination of sulfates in water samples, waste water and seawater.
SKU: 1206599
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
Aquaculture Portable CEL Laboratory
Mobile portable laboratory Hach CEL based on colorimeter DR 900 for water analysis of fish farms (aquaculture).
SKU: 251233
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Ultraturb sc bypass turbidity sensors
The Hach Ultraturb sensor is the most versatile turbidity meter in the Hach range. With its wide measurement range (0 - 1000 NTU) and optional automatic cleaning system, the Ultraturb is well suited for any application, from wastewater filtration and municipal distribution systems to raw water monitoring for further treatment.
SKU: LPV415.99.02001
Stablcal turbidity standard 20 NTU (1000 ml)
Turbidity standard for turbidity meters calibration.
SKU: 2660153
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Ferric ion solution
Solution for the colorimetric determination of chlorides in water by the mercury thiocyanate method.
SKU: 2212242
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Powder Pillows reagent for free chlorine 0 - 3.5 mg/l Cl2, DPD, 100 pieces
For the determination of free chlorine by the DPD method. Included in the Hach test kit for visual determination of the concentration of chlorine in a water sample.
SKU: 1407799
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
LCA721 standard solution, 5 parameters
Standard solution for quality control in the analysis of wastewater parameters, low range.
SKU: LCA721
Sorting:
SIL 100 high temperature silicone hose for pharmaceutical and cosmetic industries
The industrial silicone hose SIL 100 is resistant to extreme temperatures, ozone, radiation, humidity, deformation, weather and chemical influences. Suitable for use in the cosmetic and pharmaceutical industries.
SKU: SIL1006X3 - SIL10025X4
SIL 200 reinforced silicone hose for pharmaceutical and cosmetic industries
Textile-reinforced, high pressure resistant silicone hose. Can be used in the cosmetic, pharmaceutical and biotech industries.
SKU: SIL20010X6 - SIL200102X6.5
SIL 300 reinforced silicone hose for the cosmetic and pharmaceutical industries
Silicone hose with heat-resistant textile reinforcement for use in the cosmetic and pharmaceutical industries. Suitable for extreme temperatures (-60 °C - +200 °C).
SKU: SIL30013X6 - SIL300102X7.5
SulfaVer 4 reagent for the determination of sulfate 2 - 70 mg/L SO4
Hach powder reagent for the determination of sulfates in water samples, waste water and seawater.
SKU: 1206599
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
Aquaculture Portable CEL Laboratory
Mobile portable laboratory Hach CEL based on colorimeter DR 900 for water analysis of fish farms (aquaculture).
SKU: 251233
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Ultraturb sc bypass turbidity sensors
The Hach Ultraturb sensor is the most versatile turbidity meter in the Hach range. With its wide measurement range (0 - 1000 NTU) and optional automatic cleaning system, the Ultraturb is well suited for any application, from wastewater filtration and municipal distribution systems to raw water monitoring for further treatment.
SKU: LPV415.99.02001
Stablcal turbidity standard 20 NTU (1000 ml)
Turbidity standard for turbidity meters calibration.
SKU: 2660153
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Ferric ion solution
Solution for the colorimetric determination of chlorides in water by the mercury thiocyanate method.
SKU: 2212242
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Powder Pillows reagent for free chlorine 0 - 3.5 mg/l Cl2, DPD, 100 pieces
For the determination of free chlorine by the DPD method. Included in the Hach test kit for visual determination of the concentration of chlorine in a water sample.
SKU: 1407799
CL17sc Colorimetric Chlorine Analyzer, Ultra Low Range 0.008 - 5.0 mg/L Cl2
The CL17sc analyzer is best suited for pure water, which measures either the presence of chlorine in small quantities or its absence. It measures the total chlorine concentration from 0.008 to 5.0 mg/l. If your processes include reverse osmosis membranes or any form of dechlorination such as chemical (eg sulfite/bisulfite) and/or adsorptive (eg activated carbon), then the ultra-low detection range CL17sc can be used to monitor the presence of chlorine at very low levels or its complete absence, depending on the needs of your process and equipment.
SKU: 9790400, 9790500
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
LCA721 standard solution, 5 parameters
Standard solution for quality control in the analysis of wastewater parameters, low range.
SKU: LCA721

