OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
SKU: 18700020, 18700040, 18700070
Manufacturer: Stakpure
Availability: Order only
OmniaLabED+ water treatment systems provide a complete laboratory supply of clean and ultrapure water.
The perfomance of the ultrapure water dispenser (type 1) is up to 2 l/min.
Pure water (type 2) perfomance in the tank at 15 °C:
OmniaLabED+20 (18700020) - 20 l/h
OmniaLabED+40 (18700040) - 40 l/h
OmniaLabED+70 (18700070) - 70 l/h
Includes: reverse osmosis cartridge, ultra-clean cartridge, sterile 0.2 µm filter capsule, sterile overflow and ventilation filter + CO2 absorber.
Description Specifications Recommended products
Description
Description
The OmniaLabED+ from Stakpure is an excellent choice when it comes to providing a laboratory with both pure and ultrapure water. Ideal for supplying clean water to autoclaves and laboratory washers. The system complies with international standards in regards to water purity types ASTM, GOST, ISO 3696 and CLSI.
Economy is maximized by continuous electrodeionization. In addition, each OmniaLabED+ system contains 100 liters of pure Type II water, ready for withdrawal, in a tank with a recirculation system.
Benefits of OmniaLab ED+
- OptiFill ultrapure water dispenser included as standard
- Continuous removal of residual salts by electrodeionization
- Storage tank 100 liters with recirculation and pressure release
- Tank volume display in percent
- Tank volume can be increased
- Easy and economical filter replacement
- Leakage sensor as standard
Specifications OmniaLab ED+20 / ED+40 / ED+70
Feed water requirements
- Softened according to DIN 2000
- Feed water temperature 2 - 35 °C
- Manganese and iron content < 0.05 mg/l
- Free chlorine content < 0.1 mg/l
- Colloidal index max. 3
Clean water supply (type 2)
- Conductivity 0.067-1 µS/cm
- Resistance 15-1 MΩ x cm
- Silicate removal 99.9%
- Pressure tank for clean water: optional
Ultrapure water supply (type 1)
- Conductivity 0.055 µS/cm
- Resistance 18.2 MΩ x cm
- TOC value (with UV block) 1-5 ppb
- Dosing capacity up to 2 l/min.
- Particles/ml < 1
- Bacteria CFU/ml < 0.1
Technical details
- Operating pressure 2 - 6 bar
- Supply voltage 90-240/50-60 Volt/Hz
- Connector size 3/4"
- Ambient temperature 2 - 35 °C
- Dimensions (W x H x D) 511 x 1520 x 575 mm
- Weight 43 / 43 / 45 kg
Specifications
Application area | Pharmaceuticals, Medicine, Laboratory analysis |
Type | Laboratory |
Industry | Pharmaceutical, Chemical |
Compliance with the standard | ГОСТ 52501-2005, ISO 3696:1987 , ASTM D1193-06 (2011) |
Water purity type | Type 2, Type 1, Type 1 and 2 |
Water performance (type 1) | 2 L/min |
Water performance (type 2) | 70 L/h, 40 L/h, 20 L/h |
Recommended products
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Recommended products
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080