OmniaTap UV laboratory pure and ultrapure water systems
SKU: 18200052, 18200102
Manufacturer: Stakpure
Availability: Order only
Pure water perfomance depends on the model:
- OmniaTap UV 6 (18200052) 6 l/h at 15°C
- OmniaTap UV 12 (18200102) 12 l/h at 15°C
Main applications: ultratrace analysis, ICP-MS, HPLC, TOC, buffer and media preparation, laboratory glass washing, reagent and sample preparation, autoclave feed water.
The instruments come with all the filter cartridges you need to get started and a sterile 0.2 µm filter capsule.
Description Specifications Video Recommended products
Description
Description
Stakpure's OmniaTap UV series systems use several treatment technologies to produce clean and ultrapure water:
- the pump pumps the feed water through a pre-treatment cartridge with a built-in reverse osmosis module. Pre-treatment removes most of the salts, bacteria and other substances from the feed water.
- at the next stage, the water passes through the UV reactor, where it is disinfected using UV radiation.
- the water then passes through a filter cartridge which removes the remaining ions.
- purified water fills the built-in 10 liter tank.
- to maintain Type 2 (ASTM) water quality characteristics, the water in the tank is cycled periodically through an ultrapure cartridge and UV reactor using a recirculation system.
- when the water is supplied by the OptiFill dispenser, it passes through a sterile filter as the final purification step, thus providing the user with type 1 ultrapure water (ASTM).
The produced ultrapure water meets the current requirements of ASTM, ISO, GOST, USP and CLSI standards.
Benefits of the OmniaTap UV pure and ultrapure water system for laboratories
- The OptiFill dispenser is included as standard. Operated with one hand, can be rotated, removed and adjusted in height. The presence of a flexible connection provides easy pouring of water into containers of any type.
- Built-in UV reactor for additional water disinfection
- UV block (wavelength 185/254 nm) for maximum microorganism control and TOC reduction
- Thanks to the pre-treatment cartridge, the system can be connected directly to tap water source
- 10 liter tank with recirculation system
- Percentage indication of the volume of water in the tank
- Easy replacement of filter cartridges
- Leakage sensor
Specifications OmniaTap UV 6 and OmniaTap UV 12
Pure water (grade 2)
- Perfomance 6 or 12 l/h at 15 °C
- Conductivity 0.067 - 0.1 µS/cm
- Resistance 15 - 10 MΩ x cm
Ultrapure water (grade 1)
- Conductivity 0.055 µS/cm
- Resistance 18.2 µS/cm
- TOC value 1 -5 ppb
- Dispenser perfomance up to 2 l/min
- Endotoxins* EU/ml - not applicable
- Particles/ml < 1
- Bacteria CFU/ml < 0.1
Feeding water requirements
- Tap water according to DIN 2000
- Temperature 2 - 35 °C
- Manganese and iron content < 0.05 mg/l
- Free chlorine content < 0.1 mg/l
- Sediment Density Index (SDI) / Colloidal Index (CI) max. 3
Technical characteristics of the device
- Operating pressure 2 - 6 bar
- Daily water quantity < 50 liter
- Supply voltage 90-240 / 50-60 Volt/Hz
- Power consumption 0.1 kW
- Connector size 3/4" mm
- Ambient temperature 2 to 35 °C
- Dimensions with dispenser W x H x D 390 x 720 x 615 mm
- Weight 21 kg
Specifications
Application area | Pharmaceuticals, Medicine, Laboratory analysis |
Type | Laboratory |
Industry | Pharmaceutical, Chemical |
Compliance with the standard | ГОСТ 52501-2005, ISO 3696:1987 , ASTM D1193-06 (2011) |
Water purity type | Type 2, Type 1, Type 1 and 2 |
Water performance (type 1) | 2 L/min |
Water performance (type 2) | 12 L/h, 6 L/h |
Recommended products
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Recommended products
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001