+998 (90) 174-57-84
OmniaPure ultrapure water systems, type 1
SKU: 18200001
Manufacturer: Stakpure
Availability: Order only
Stakpure's OmniaPure Lab Water Purification Systems can be customized to fit any lab that requires ultrapure water (ASTM Type 1) to perform its tasks. Water treatment systems produce 20 - 100 liters per day and are fully configurable depending on the needs of the laboratory.
The OptiFill dispenser, with a display showing the characteristics of the water, is operated with one hand and can be installed both on the working surface of the table and on the wall. The flexible connection from the dispenser to the system ensures easy pouring of water into any type of container.
Description Specifications Recommended products
Description
Description
The OptiFill dispenser and leakage sensor are included as standard. Available mounting options for the system allow installation on a laboratory bench or on a wall. Simple and economical filter replacement reduces operating costs. An integrated water pre-treatment system ensures reliable results.
The system is supplied ready to use, including: reverse osmosis filter cartridge, ultrapure water filter cartridge, sterile 0.2 µm filter capsule, R 3/4″ water connection adapter, UV lamp and/or ultrafiltration (UV) module and / or a module for continuous monitoring of the TOC value, depending on the model.
Areas of application
OmniaPure - AAS (atomic absorption spectroscopy), IC (ion chromatography), ICP (inductively coupled plasma), buffers and media preparation.
OmniaPure UV and OmniaPure UV-TOC - ultra-trace analysis, ICP-MS, HPLC, TOC analysis.
OmniaPure UV/UF and OmniaPure UV-TOC/UF - microbiology, cell culture media.
Order Information
Standard
- 18200001 Omnia Pure
- 18200002 Omnia Pure UV
- 18200003 OmniaPure UV/UF
- 18200004 OmniaPure UV-TOC
- 18200005 OmniaPure UV-TOC/UF
Production unit + wall dispenser
- 18200011 OmniaPure-W
- 18200012 OmniaPure-W UV
- 18200013 OmniaPure-W UV/UF
- 18200014 OmniaPure-W UV-TOC
- 18200015 OmniaPure-W UV-TOC/UF
Production unit + benchtop dispenser
- 18200021 OmniaPure-T
- 18200022 OmniaPure-T UV
- 18200023 OmniaPure-T UV/UF
- 18200024 OmniaPure-T UV-TOC
- 18200025 OmniaPure-T UV-TOC/UF
Specifications OmniaPure | UV or UV-TOC | UV/UF or UV-TOC/UF
Water Type 1 according to ASTM
- Conductivity 0.055 µS/cm
- Resistance 18.2 MΩ x cm
- TOC value 5 - 10 | 1 - 5 | 1 - 5 ppb
- Dosing capacity up to 2 | up to 2 | up to 1.6 l/min
- Endotoxins - | - | < 0.001 EU/ml
- RNase - | - | < 0.01 ng/ml
- DNase - | - | < 4 pg/µl
- Particles/ml < 1
- Bacteria < 0.1 cfu/ml
Feed water requirements
- Water prepared by ion exchange, reverse osmosis, electroionization or distillation.
- Feed water temperature 2 to 35 °C
- Conductivity < 30 µS/cm
- TOC value < 50 ppb
Technical details
- Operating pressure 0.5 - 6 bar
- Supply voltage 90-240/50-60 V/Hz
- Connector size 3/4"
- Operating temperature range 2 - 35 °C
- Dimensions with dispenser W x H x D 390 x 720 x 525 mm
- Dimensions without dispenser W x H x D 390 x 480 x 380 mm
- OptiFill dispenser dimensions (wall-mounted) 100 x 520 x 460
- OptiFill dispenser dimensions (benchtop) 140 x 580 x 520
- Weight kg 19 | 20 | 20
Specifications
| Application area | Pharmaceuticals, Medicine, Laboratory analysis |
| Type | Laboratory |
| Industry | Pharmaceutical, Chemical |
| Compliance with the standard | ГОСТ 52501-2005, ISO 3696:1987 , ASTM D1193-06 (2011) |
| Water purity type | Type 1 |
| Water performance (type 1) | 1.6 L/min, 2 L/min |
Recommended products
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
CompareLaboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Recommended products
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
