998 (90) 174-57-84
Set for the preparation of dilution water for BOD 5 test
SKU: LZC901
Manufacturer: Hach
Availability: Order only
Set LZC901 for BOD5 cuvette test.
The prepared water for dilution must always be clear (not cloudy and free of suspended solids).
When using the dilution kit for a long time, it is necessary to rinse the flask, aerator block and the tube, which is immersed in the dilution water with tap water, and then dry it all to remove microbiological contaminants.
Specifications Recommended products
Specifications
Specifications
| Application area | Wastewater |
| Industry | Municipal |
| Parameters | BOD |
Recommended products
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Compare
UV protection housing for SC4200c and SC4500 controllers
Sun protection housing for SC controllers.
SKU: LXZ524.99.00005
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
Replacement halogen bulb for DR3900 / DR2700 / DR2800 / DR3800 / Lico 500
Replaceable halogen lamp. Suitable for use with Hach DR3900 / DR2700 / DR2800 / DR3800 / Lico 500 spectrophotometers.
SKU: LZV565
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
SKU: 006.593
SKU: 2810 0100
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
Digital Sight 1000 camera for Nikon ECLIPSE microscopes
The Digital Sight 1000 is a cost-effective color camera that can directly display high-definition microscope images on a Full HD display without the need for a PC.
SKU: Digital Sight 1000
Compact Extension Cables Аber Instruments
Aber Instruments are recognized by many of the world's largest brewing companies as the most accurate and reliable instruments for measuring viable yeast cell concentration.
SKU: 1635-24/1
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Hach rectangular cuvettes 50 mm, 10 pcs. PMMA
Sample cuvette, polystyrene, 50 x 10 mm, optical path 50 mm, minimum volume 5.0 ml, with lids, pack contains 10 pcs.
SKU: LZP341
SKU: 005.094
Replacement cuvette for turbidity meters TU5300sc and TU5400sc
High quality glass test vial.
SKU: LZY834
SKU: 001.048
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
Recommended products
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Amtax sc analyzer electrode maintenance kit
The kit contains 3 bottles of electrolyte and 3 membranes for the AMTAX sc ammonium analyzer for ranges 2, 3, 4 (0.05 - 1000 mg/L NH4-N).
SKU: LCW868
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
Delivery tubes for Digital Titrator, 5 pk
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 1720500
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
UV protection housing for SC4200c and SC4500 controllers
Sun protection housing for SC controllers.
SKU: LXZ524.99.00005
