Online analyzers

Filters

Filters

Reset

Application area

Type

Industry

Brand name

Parameters

Measurement Range

Measurement method

Measurement Range (2)

Sorting: 

Process TOC analyzer BioTector B3500s

Process TOC analyzer BioTector B3500s

The BioTector B3500s TOC Analyzer is a simple solution for continuous real-time monitoring of TOC in municipal wastewater.

SKU: B5BCAA152AACS

View product Compare

Phosphax sc LR low range orthophosphate analyzer

Phosphax sc LR low range orthophosphate analyzer

Accurate analyzer for measuring the concentration of orthophosphates in the low range of 0.015 - 2 mg/l PO4-P in waste water.

SKU: LXV422.99.33001, LXV422.99.33011

View product Compare

9185 sc Amperometric Ozone Analyzer

9185 sc Amperometric Ozone Analyzer

The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.

SKU: LXV433.99.00001

View product Compare

Process COD analyzer EZ7050 / EZ7051 (permanganate method)

Process COD analyzer EZ7050 / EZ7051 (permanganate method)

The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.

SKU: EZ7050.990A1C02, EZ7051.990A1C02

View product Compare

Process COD analyzer EZ7000 - EZ7004 (dichromate method)

Process COD analyzer EZ7000 - EZ7004 (dichromate method)

Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.

SKU: EZ7000.990A1C02

View product Compare

EZ4004 Process Total Alkalinity Analyzer

EZ4004 Process Total Alkalinity Analyzer

Online analyzer to determine the total alkalinity of water in real time.

SKU: EZ4004.99001C02

View product Compare

EZ4003 Free Alkalinity Analyzer

EZ4003 Free Alkalinity Analyzer

The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.

SKU: EZ4003.99001C02

View product Compare

EZ5000 Series Alkalinity and Hardness Analyzers

EZ5000 Series Alkalinity and Hardness Analyzers

The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.

SKU: EZ5004.99001C02

View product Compare

Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044

Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044

The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.

SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02

View product Compare

Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series

Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series

EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.

SKU: EZ1016.99001C02

View product Compare

Industrial titrator - Ammonium Analyzer EZ4005

Industrial titrator - Ammonium Analyzer EZ4005

The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.

SKU: EZ4005.99001C02

View product Compare

EZ3000 / EZ3001 Ion Selective Ammonium Analyzers

EZ3000 / EZ3001 Ion Selective Ammonium Analyzers

Industrial analyzer for periodic (discontinuous) analysis of the concentration of ammonium NH4-N in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.

SKU: EZ3000.99001C02, EZ3001.99001C02

View product Compare

EZ1002 / EZ1003 Ammonium Colorimetric Analyzer

EZ1002 / EZ1003 Ammonium Colorimetric Analyzer

EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).

SKU: EZ1002.99001C02, EZ1003.99001C02

View product Compare

EZ1006 / EZ1007 Free and Total Chlorine Analyzers

EZ1006 / EZ1007 Free and Total Chlorine Analyzers

The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.

SKU: EZ1006.99001C02, EZ1007.99001C02

View product Compare

TU5300sc and TU5400sc online turbidity analyzers

TU5300sc and TU5400sc online turbidity analyzers

The TU5300 sc and TU5400 sc turbidity meters are used with the sc controller to measure low turbidity, mainly in drinking water systems. The TU5300 sc and TU5400 sc turbidity meters measure the scattered light at a 90° angle in a 360° radius around the axis of the incident light beam.

SKU: LXV445.99.10112, LXV445.99.10212

View product Compare

Industrial TOC analyzer BioTector B3500ul

Industrial TOC analyzer BioTector B3500ul

TOC analyzer for petrochemical, power generation and reverse osmosis applications.

SKU: B5FBAA152EAC2

View product Compare

Orthophosphate analyzer PHOSPHAX sc

Orthophosphate analyzer PHOSPHAX sc

With detection limits ranging from 0.05 mg/L to 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from water entering the treatment plant or starting a phosphorus removal process where phosphate levels can be high, to discharged wastewater with a low level of phosphate.

SKU: LXV422.99.13001

View product Compare

9184 sc Amperometric analyzer for active chlorine

9184 sc Amperometric analyzer for active chlorine

The Chlorine Analyzer 9184sc is a single-channel industrial sensor that measures chlorine concentrations in wastewater treatment plants, potable water production, distribution networks and other applications where monitoring of active chlorine from 0 to 20 mg/L HOCl is required.

SKU: LXV432.99.00001, LXV430.99.00001

View product Compare

Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc

Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc

The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.

SKU: LXV45A.98.23022, LXV45B.98.23022

View product Compare

CL17 sc Photometric Chlorine Analyzer

CL17 sc Photometric Chlorine Analyzer

The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.

SKU: 8574500, 8574400

View product Compare

Ammonium analyzers Hach Amtax sc

Ammonium analyzers Hach Amtax sc

High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.

SKU: LXV421.99.???1

View product Compare

TOC analyzer BioTector B7000i Dairy

TOC analyzer BioTector B7000i Dairy

The Hach BioTector B7000i Online Dairy TOC Analyzer is a maintenance-free organic carbon analyzer designed specifically to detect product leaks, save water consumption and improve production processes.

SKU: BDBAAA052MABAA4

View product Compare

Analyzer of total organic carbon, phosphorus and nitrogen BioTector 7000

Analyzer of total organic carbon, phosphorus and nitrogen BioTector 7000

Industrial analyzer for the continuous determination of total organic carbon (TOC) or total carbon (TC) in accordance with DIN 38409 for drinking water, waste water and industrial water. The analyzer is also suitable for the determination of total nitrogen (TN) and total phosphorus (TP).

SKU: B4RDDF052AECAE2

View product Compare

Amperometric chlorine dioxide analyzer 9187 sc

Amperometric chlorine dioxide analyzer 9187 sc

The 9187 sc chlorine dioxide sensor is a single-channel industrial sensor that measures ClO2 in drinking water treatment plants, distribution networks and other applications where chlorine dioxide levels need to be monitored.

SKU: LXV434.99.00001

View product Compare


Sorting: 

Process TOC analyzer BioTector B3500s

Process TOC analyzer BioTector B3500s

The BioTector B3500s TOC Analyzer is a simple solution for continuous real-time monitoring of TOC in municipal wastewater.

SKU: B5BCAA152AACS

View product Compare

Phosphax sc LR low range orthophosphate analyzer

Phosphax sc LR low range orthophosphate analyzer

Accurate analyzer for measuring the concentration of orthophosphates in the low range of 0.015 - 2 mg/l PO4-P in waste water.

SKU: LXV422.99.33001, LXV422.99.33011

View product Compare

9185 sc Amperometric Ozone Analyzer

9185 sc Amperometric Ozone Analyzer

The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.

SKU: LXV433.99.00001

View product Compare

Process COD analyzer EZ7050 / EZ7051 (permanganate method)

Process COD analyzer EZ7050 / EZ7051 (permanganate method)

The EZ7050 / EZ7051 Chemical Oxygen Demand Analyzers measure O2 concentrations in the range of 1 - 20 mg/L O2 and 20 - 200 mg/L O2, respectively. Titrimetric method.

SKU: EZ7050.990A1C02, EZ7051.990A1C02

View product Compare

Process COD analyzer EZ7000 - EZ7004 (dichromate method)

Process COD analyzer EZ7000 - EZ7004 (dichromate method)

Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.

SKU: EZ7000.990A1C02

View product Compare

EZ4004 Process Total Alkalinity Analyzer

EZ4004 Process Total Alkalinity Analyzer

Online analyzer to determine the total alkalinity of water in real time.

SKU: EZ4004.99001C02

View product Compare

EZ4003 Free Alkalinity Analyzer

EZ4003 Free Alkalinity Analyzer

The EZ4003 Free Alkalinity Analyzers use an acid-base titration. Standard range 100 - 2500 mg/l CaCO3.

SKU: EZ4003.99001C02

View product Compare

EZ5000 Series Alkalinity and Hardness Analyzers

EZ5000 Series Alkalinity and Hardness Analyzers

The instrument configuration "Total Hardness + Alkalinity" performs a sequence of two different titration methods: acid-base titration with a combination electrode for alkalinity determination and colorimetric titration for hardness determination in a single titration vessel. Combined measurement of two parameters in one analyzer is a convenient solution for operators and eliminates the need for additional space and the purchase of a second analyzer.

SKU: EZ5004.99001C02

View product Compare

Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044

Titrimetric analyzer of total and calcium hardness EZ4043 / EZ4041 / EZ4044

The EZ4000 Series Hardness Analyzers are single parameter titrators: total hardness EZ4043 - Calmagit / EDTA method with a submersible LED probe, standard measurement range: 0.25 - 10 mg/L CaCO3; EZ4041 total hardness; calmagit / EDTA method, standard measurement range: 100 - 1000 mg/L CaCO3; EZ4044 Calcium hardness, standard measuring range: 10 - 1000 mg/L CaCO3.

SKU: EZ4041.99001C02, EZ4043.99001C02, EZ4044.99001C02

View product Compare

Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series

Colorimetric Hardness Analyzer Envirolyzer EZ1000 Series

EZ1000 series analyzers use the colorimetric method of analysis: EZ1016 total hardness, EZ1017 calcium hardness, EZ1304 total hardness and calcium hardness, EZ1306 total hardness, calcium and magnesium hardness. Standard measuring range: 0.025 - 1 mg/L CaCO3.

SKU: EZ1016.99001C02

View product Compare

Industrial titrator - Ammonium Analyzer EZ4005

Industrial titrator - Ammonium Analyzer EZ4005

The EZ4005 ammonium analyzer is a single parameter titrator with a wide measuring range: Standard measuring range: 100 - 5000 mg/L NH4-N.

SKU: EZ4005.99001C02

View product Compare

EZ3000 / EZ3001 Ion Selective Ammonium Analyzers

EZ3000 / EZ3001 Ion Selective Ammonium Analyzers

Industrial analyzer for periodic (discontinuous) analysis of the concentration of ammonium NH4-N in water. Direct measurement with combined ion-selective electrode according to the APHA 4500-NH3 (D) standard method.

SKU: EZ3000.99001C02, EZ3001.99001C02

View product Compare

EZ1002 / EZ1003 Ammonium Colorimetric Analyzer

EZ1002 / EZ1003 Ammonium Colorimetric Analyzer

EZ1002 is a colorimetric measurement of ammonium concentration at 630 nm based on the APHA 3500-NH3 standard method (Berthelot). EZ1003 - colorimetric measurement at 450 nm in accordance with EPA Standard Method 350.1 (Nessler).

SKU: EZ1002.99001C02, EZ1003.99001C02

View product Compare

EZ1006 / EZ1007 Free and Total Chlorine Analyzers

EZ1006 / EZ1007 Free and Total Chlorine Analyzers

The EZ Series online analyzers offer several options for monitoring chlorine in water. Typical applications are drinking water, surface water, process water. The EZ1000 Series analyzers use colorimetric method to measure chlorine. EZ1006 Chlorine free. EZ1007 Chlorine, total. Standard measuring range: 0.025 - 1.5 mg / l Cl2.

SKU: EZ1006.99001C02, EZ1007.99001C02

View product Compare

TU5300sc and TU5400sc online turbidity analyzers

TU5300sc and TU5400sc online turbidity analyzers

The TU5300 sc and TU5400 sc turbidity meters are used with the sc controller to measure low turbidity, mainly in drinking water systems. The TU5300 sc and TU5400 sc turbidity meters measure the scattered light at a 90° angle in a 360° radius around the axis of the incident light beam.

SKU: LXV445.99.10112, LXV445.99.10212

View product Compare

Industrial TOC analyzer BioTector B3500ul

Industrial TOC analyzer BioTector B3500ul

TOC analyzer for petrochemical, power generation and reverse osmosis applications.

SKU: B5FBAA152EAC2

View product Compare

Orthophosphate analyzer PHOSPHAX sc

Orthophosphate analyzer PHOSPHAX sc

With detection limits ranging from 0.05 mg/L to 50 mg/L, the Phosphax sc phosphate analyzer can be used anywhere in the wastewater treatment process, from water entering the treatment plant or starting a phosphorus removal process where phosphate levels can be high, to discharged wastewater with a low level of phosphate.

SKU: LXV422.99.13001

View product Compare

9184 sc Amperometric analyzer for active chlorine

9184 sc Amperometric analyzer for active chlorine

The Chlorine Analyzer 9184sc is a single-channel industrial sensor that measures chlorine concentrations in wastewater treatment plants, potable water production, distribution networks and other applications where monitoring of active chlorine from 0 to 20 mg/L HOCl is required.

SKU: LXV432.99.00001, LXV430.99.00001

View product Compare

Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc

Amperometric sensors for total and free chlorine CLT10 sc and CLF10 sc

The amperometric sensors CLT10 sc and CLF10 sc complement real-time chemical analysis solutions for free and total chlorine in the laboratory and industry. Amperometric sensors continuously monitor the chlorine concentration without the use of reagents. Measurement range 0 - 20 ppm Cl2.

SKU: LXV45A.98.23022, LXV45B.98.23022

View product Compare

CL17 sc Photometric Chlorine Analyzer

CL17 sc Photometric Chlorine Analyzer

The Hach CL17 sc analyzer is used for continuous monitoring and determination of the concentration of free or total residual chlorine in water. Readings are not affected by changes in chlorine concentration, sample pH, temperature, flow rate, or pressure. The CL17 sc is also suitable for measuring residual permanganate content. Research demonstrates the analyzer's analytical capabilities and confirms that it is a reliable solution and a good tool for managing complex water purification and disinfection processes.

SKU: 8574500, 8574400

View product Compare

Ammonium analyzers Hach Amtax sc

Ammonium analyzers Hach Amtax sc

High-precision industrial device for the determination of ammonium in water, waste water and activated sludge. Amtax sc measures ammonium concentration using a gas selective electrode (GSE). Designed for outdoor or indoor installation.

SKU: LXV421.99.???1

View product Compare

TOC analyzer BioTector B7000i Dairy

TOC analyzer BioTector B7000i Dairy

The Hach BioTector B7000i Online Dairy TOC Analyzer is a maintenance-free organic carbon analyzer designed specifically to detect product leaks, save water consumption and improve production processes.

SKU: BDBAAA052MABAA4

View product Compare

Analyzer of total organic carbon, phosphorus and nitrogen BioTector 7000

Analyzer of total organic carbon, phosphorus and nitrogen BioTector 7000

Industrial analyzer for the continuous determination of total organic carbon (TOC) or total carbon (TC) in accordance with DIN 38409 for drinking water, waste water and industrial water. The analyzer is also suitable for the determination of total nitrogen (TN) and total phosphorus (TP).

SKU: B4RDDF052AECAE2

View product Compare

Amperometric chlorine dioxide analyzer 9187 sc

Amperometric chlorine dioxide analyzer 9187 sc

The 9187 sc chlorine dioxide sensor is a single-channel industrial sensor that measures ClO2 in drinking water treatment plants, distribution networks and other applications where chlorine dioxide levels need to be monitored.

SKU: LXV434.99.00001

View product Compare