+998 (90) 174-57-84
DR300 Pocket Colorimeter, Chlorine Dioxide
SKU: LPV445.99.51110
Manufacturer: Hach
Availability: Order only
Hach DR300 LPV445.99.51110 Pocket Colorimeter for Chlorine Dioxide (0.05 - 5.00 mg/L ClO2) in Water and Wastewater is supplied as a ready-to-use instrument in a robust case (4660200), including batteries, sample cuvettes ( 4 pieces) and user manual.
Reagents are sold separately (see the Accessories tab).
Description Specifications Video Recommended products Accessories
Description
Description
Rugged, waterproof (IP67) construction withstands any conditions you encounter in the field or laboratory, while providing years of reliable and accurate measurements. Simple, intuitive controls reduce potential errors by ensuring accurate measurement data you can trust, time after time. The large, backlit display makes it easy to read measurements in all conditions.
Analysis of the water sample for chlorine dioxide should be carried out immediately after sampling; do not preserve the sample for further analysis. The test must be performed in the cuvette supplied with the colorimeter and specified in the working procedure document. Before each analysis, make sure the cuvette is clean and free of scratches, especially where light passes through. Rinse the cuvette and lid with sample three times before filling.
Make sure there are no fingerprints or liquid droplets on the outside of the sample cuvette. Wipe the cuvette with a lint-free cloth before measuring. Cold water can cause condensation on the cuvette or bubbles during color development. Examine it for condensation or bubbles. Remove condensation with a lint-free cloth and / or invert to remove bubbles.
General description of the method: Chlorine dioxide reacts with DPD (N, N-diethyl-p-phenylenediamine) within one fifth of its total available chlorine content, which corresponds to the reduction of chlorine dioxide to chlorite. A pink color is formed, the intensity of which is proportional to the concentration of chlorine dioxide in the sample. Chlorine interference is eliminated by the addition of glycine, which converts free chlorine to chloraminoacetic acid but does not affect chlorine dioxide.
Specifications Hach LPV445.99.51110
- Absorption: 0 - 2.5 abs.
- Data logger: last 50 measurements
- Detector: silicon photodiode
- Dimensions (H x W x D): 34 mm x 69 mm x 157 mm
- Display: LCD with backlight
- Case protection grade: IP67, waterproof at depth 1 m for 30 minutes.
- Measurement method: DPD / glycine (Hach method 10126)
- Operating conditions: 0 - 50 °C (32 - 122 °F); Relative humidity 0 - 90% (non-condensing)
- Power supply: four AAA alkaline batteries; approximate life of 5000 tests
- Range: 0.05 - 5.00 mg/L ClO2
- Light source: light-emitting diode (LED)
- Spectral bandwidth: 15nm filter bandwidth
- Wavelength: 528 ± 2nm
- Weight: 0.25kg
Specifications
| Application area | Environmental monitoring, Wastewater, Food production, Drinking water, Treatment facilities |
| Type | |
| Industry | Ecology, Pulp and paper, Power generation, Food and Beverage, Municipal |
| Parameters | Chlorine dioxide |
| Measurement Range | 0.05 - 5.00 mg/L ClO2 |
| Light source | Light Emitting Diode (LED) |
| Wavelength range | 528 ±2 nm |
| Power supply | 4 AAA alkaline batteries |
| Cuvette compatibility | 25 mm (10 mL), 1 cm (10 mL) |
Recommended products
DR900 Multiparameter Portable Colorimeter
Portable and rugged microprocessor controlled colorimeter with energy saving LED technology. Multi-parameter portable water analysis - a wide range of water quality parameters for use in the field and lab.
SKU: 9385200
CompareDR300 Pocket Colorimeter, Chlorine, Free and Total (DPD)
Hach DR 300 pocket colorimeter for the analysis of free and total chlorine in the ranges 0.02 - 2.00 mg/L Cl2 and 0.1 - 8.0 mg/L Cl2.
SKU: LPV445.99.00110
DR300 Pocket Colorimeter | 500 nm, 528 nm, 600 nm, 655 nm
Hach DR 300 pocket colorimeter for water analysis. Program custom methods and calibrations on two channels.
SKU: LPV445.99.50110/-.52110/-.60110/-.65110
Chlorine standard solution, 50 - 75 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 50 - 75 mg/L Cl2.
SKU: 1426810
SpecCheck Set of Secondary Standards for Chlorine, DPD Method
SpecCheck set of secondary standards for chlorine determination (high range) by DPD method. Contains a cuvette with a blank test and 3 cuvettes with color gels of different concentrations.
SKU: 2893300
Accessories
Chlorine Dioxide Reagent Set, 0,04 - 5,00 mg/L ClO2
Powder Pillows Reagent Set for Chlorine dioxide determination, measuring range 0,04 - 5,00 mg/L ClO2.
SKU: 2770900
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Recommended products
DR900 Multiparameter Portable Colorimeter
Portable and rugged microprocessor controlled colorimeter with energy saving LED technology. Multi-parameter portable water analysis - a wide range of water quality parameters for use in the field and lab.
SKU: 9385200
DR300 Pocket Colorimeter, Chlorine, Free and Total (DPD)
Hach DR 300 pocket colorimeter for the analysis of free and total chlorine in the ranges 0.02 - 2.00 mg/L Cl2 and 0.1 - 8.0 mg/L Cl2.
SKU: LPV445.99.00110
DR300 Pocket Colorimeter | 500 nm, 528 nm, 600 nm, 655 nm
Hach DR 300 pocket colorimeter for water analysis. Program custom methods and calibrations on two channels.
SKU: LPV445.99.50110/-.52110/-.60110/-.65110
Chlorine standard solution, 50 - 75 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 50 - 75 mg/L Cl2.
SKU: 1426810
SpecCheck Set of Secondary Standards for Chlorine, DPD Method
SpecCheck set of secondary standards for chlorine determination (high range) by DPD method. Contains a cuvette with a blank test and 3 cuvettes with color gels of different concentrations.
SKU: 2893300
