Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
SKU: 18500020, 18500040, 18500060, 18500080
Manufacturer: Stakpure
Availability: Order only
Stakpure's OmniaLabRO laboratory water treatment system produces water purified by reverse osmosis. Suitable for laboratories that require large amounts of Type 3 pure water for daily tasks.
System capacity (l/h) depends on the model:
18500020 OmniaLabRO 20
18500040 OmniaLabRO 40
18500060 OmniaLabRO 60
18500080 OmniaLabRO 80
Description Specifications Recommended products
Description
Description
The OmniaLabRO Laboratory Water Purification System produces Type 3 water, which is suitable for applications where salt, silicate and suspended solids need to be reduced.
OmniaLabRO is equipped with a 100 liter storage tank and an OptiFill dispenser with display.
The main applications are: preparation of buffer solutions, washing / rinsing of laboratory glassware, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and type 1 ultrapure water systems.
Characteristics of the OmniaLabRO 20/40/60/80 water purification system
Water type 3
- Pure water capacity 20, 40, 60, 80 l/h at 15 °C
- Filtration coefficient in % (ions, germs and bacteria) > 98
Feed water requirements
- Softened or hardness stabilized water according to DIN 2000
- Feed water temperature + 2 to 35 °C
- Manganese and iron content < 0.05 mg/l
- Free chlorine content < 0.1 mg/l
- SDI max. 3
Technical details
- Working pressure 2 – 6 bar
- Supply voltage 90-240/50-60 Volt/Hz
- Connector size 3/4"
- Ambient temperature + 2 to 35 °C
- Dimensions W x H x D mm 511 x 1520 x 575 mm
- Weight 38, 38, 40, 40 kg
Optional Accessories
- 19200020 OmniaLab Pretreatment Block - 10"
- 19200050 UV disinfection unit for tank 254 nm
- 16561201 Booster pump SC 3000
Specifications
Application area | Pharmaceuticals, Laboratory analysis |
Type | Laboratory |
Industry | Pharmaceutical, Chemical |
Compliance with the standard | ASTM D1193-06 (2011) |
Water purity type | Type 3 |
Water performance (type 3) | 80 L/h, 60 L/h, 40 L/h, 20 L/h |
Recommended products
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Recommended products
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaLab ED laboratory water purification system (purity class 2)
OmniaLab ED is designed to provide a comprehensive laboratory supply of high quality type 2 clean water. Water supply for autoclaves, laboratory washers and ultrapure water systems.
SKU: 18700021, 18700041, 18700071
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080