+998 (90) 174-57-84
OmniaLab ED laboratory water purification system (purity class 2)
SKU: 18700021, 18700041, 18700071
Manufacturer: Stakpure
Availability: Order only
Water purification system for supplying water to autoclaves, laboratory washers and ultrapure water systems. Pure water (type 2) perfomane at 15 °C 20, 40, 70 l/h depends on the model:
- OmniaLabED20 (18700021)
- OmniaLabED40 (18700041)
- OmniaLabED70 (18700071)
Moreover, the system also holds 100 liters of pure water in the storage tank.
Description Specifications Recommended products
Description
Description
OmniaLabED is an efficient solution for complete laboratory supply of high quality Type 2 pure water. The laboratory water purification system complies with international standards: ASTM, ISO 3696, CLRW (CLSI), and in combination with continuous electrodeionization provides maximum savings.
In addition, the OmniaLabED system contains 100 liters of pure water in a recirculating storage tank to maintain quality. The water in the tank is always ready to supply laboratory equipment: autoclaves, laboratory washers, and ultrapure water systems.
Advantages
- The OptiFill dispenser is included as standard. The dispenser has a built-in control unit and monitoring of water quality indicators. Operated with one hand, removable, can be rotated and adjusted in height, flexible connection for easy pouring of water into any type of container.
- Continuous removal of residual salts by electrodeionization
- 100 liter storage tank with recirculation and pressurized outlet
- Tank volume display in percent
- Tank volume can be modularly increased
- Easy and economical filter replacement
- Leakage sensor as standard
Specifications OmniaLabED 20 / 40 / 70
Water type 2
- Conductivity * 0.1–1 µS/cm
- Resistance * 10–1 MΩ x cm
- TOC* value < 30 ppb
- Silicate removal* > 99%
- Dosing capacity up to 2 l/min.
- Particles** /ml < 1
- Bacteria ** CFU/ml < 0.1
- Optional water tank with pressurized outlet
*depending on the quality of the connected water
**with sterilizing filter 0.2 µm (included)
Feeding water requirements
- Softened according to DIN 2000
- Water temperature 2 - 35 °C
- Manganese and iron content < 0.05 mg/l
- Free chlorine content < 0.1 mg/l
- Colloidal index max. 3
Technical details
- Operating pressure 2 - 6 bar
- Supply voltage 90-240/50-60 Volt/Hz
- Connector size 3/4"
- Ambient temperature 2 - 35 °C
- Dimensions W x H x D 511 x 1520 x 575 mm
- Weight (kg) 41 / 41 / 43
Specifications
| Application area | Pharmaceuticals, Medicine, Laboratory analysis |
| Type | Laboratory |
| Industry | Pharmaceutical, Chemical |
| Compliance with the standard | ГОСТ 52501-2005, ISO 3696:1987 , ASTM D1193-06 (2011) |
| Water purity type | Type 2 |
| Water performance (type 2) | 70 L/h, 40 L/h, 20 L/h |
Recommended products
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Compare
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
Recommended products
Arium Pro water purification system (type 1) for laboratories
The laboratory water purification system is available in five versions with different modules. This series offers the widest range of features and options for individual configuration.
SKU: H2OBASIC-T
OmniaTap UV laboratory pure and ultrapure water systems
OmniaTap UV water treatment systems are used to purify tap water to meet laboratory water standards. In addition to standard filter cartridges, water passes through a UV reactor, where it is disinfected using UV radiation.
SKU: 18200052, 18200102
Laboratory water purification system OmniaLabRO 20/40/60/80, type 3
Water purification by reverse osmosis. OmniaLabRO produces water of the third type, which is suitable for applications where the content of salts, silicates and suspended solids must be reduced. The main applications are buffer preparation, laboratory glassware washing/rinsing, general chemistry, hydroponics, supplying water to stainless steel autoclaves, steam generators, air humidifiers, sterilizers and Type 1 ultrapure water systems.
SKU: 18500020, 18500040, 18500060, 18500080
Water purification system OmniaLabDS 20/40/60/80, water type 2 and CLRW (CLSI)
The OmniaLabDS water purification system produces Type 2 pure water up to 80 liters per hour. An aftertreatment cartridge and an optional emergency power supply make this system exceptionally reliable for feeding clinical analytical systems, as well as supplying water to steam sterilizers and washer-disinfectors.
SKU: 18800020, 18800040, 18800060, 18800080
OmniaLab ED+ Water treatment system for laboratories, tank 100 liters
Stakpure's all-in-one water purification system for laboratory autoclaves and dishwashers. The tank holds 100 liters. Supply of pure water (type 2) and ultrapure water (type 1).
SKU: 18700020, 18700040, 18700070
Ultrapure and Pure Water System OmniaTap 6 | 12
OmniaTap 6 and 12 are laboratory water treatment systems for producing pure and ultrapure water in relatively small quantities (< 50 liters/day). The ability to provide water of two degrees of purity in one system is the result of a combination of cutting-edge technologies. Pure water is suitable for the preparation of: buffers, microbiological media, chemical and biochemical reagents.
SKU: 18200051, 18200101
OmniaLab UP 20/40 Water purification system, type 2
OmniaLabUP is a laboratory water treatment system with a constant supply of high quality water. The OmniaLab UP is equipped with a 100 liter recirculating tank for storing Type II pure water.
SKU: 18600020, 18600040
OmniaPure ultrapure water systems, type 1
If you need the highest quality pure water that meets the requirements of analytical and life science laboratories, one of the OmniaPure systems is for you. The built-in pre-cleaning system ensures reliable analysis results at all times and reduces operating costs. OmniaPure laboratory water purification systems can be customized to meet the needs of the laboratory, including continuous TOC control or UV disinfection.
SKU: 18200001
Laboratory water purification systems OmniaTap UV/UF
Stakpure's OmniaTap UV/UF are designed to produce clean and ultrapure water for laboratory use. The model is equipped with a UV reactor and an ultrafiltration module to remove microorganisms and non-ionized compounds.
SKU: 18200053, 18200103
