Catalog
Sorting:
LCK390 cuvette test AOX, 0,05 - 3,0 mg/L
LCK390 cuvette test for determination of AOX, measurement range 0,05 - 3,0 mg/L
SKU: LCK390
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
PHOSPHAX sc analyzer cleaning solution
Cleaning solution for the Hach Lange process orthophosphate analyzer.
SKU: LCW870
SC1000 Probe module for 4 sensors, Prognosys
SC1000 Probe module for 4 sensors.
SKU: LXV400.99.0G021
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
LT200 / DRB200 Dry thermostat with 2 blocks, 6x13 mm and 4x20 mm per block
LT200 is a digital thermoreactor with2 separately controllable heating blocks with separate protection covers, both blocks each with 6x13mm and 4x20mm holes. The thermostat meets the requirements for fast and high-quality decomposition in municipal, industrial and service laboratories.
SKU: LTV082.99.51002
Process COD analyzer EZ7000 - EZ7004 (dichromate method)
Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.
SKU: EZ7000.990A1C02
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
Pocket Pro+ Multi 2 Tester for pH / Cond / TDS / Salinity with Replaceable Sensor
Pocket Pro+ Multi 2 tester, parameter: Cond, TDS, Salinity, Temp, pH.
SKU: 9532800
Glass square sample cell 25 mm, matched pair
Accessory for spectrophotometers / spectral analysis of liquids.
SKU: 2095000
Powder Pillows for the determination of chlorine, iodine and bromine (DPD)
Hach reagent for determination of chlorine / iodine / bromine concentration by DPD method.
SKU: 1406499
DR300 Pocket Colorimeter, Ammonia Nitrogen
Hach DR 300 pocket single-parameter colorimeter for measuring Ammonia Nitrogen consentration in water. Measuring range: 0.01 - 0.80 mg/L NH3-N..
SKU: LPV445.99.40110
Cl17 Chlorine Analyzer Maintenance Kit
Pre-assembled tubing for annual maintenance of the Hach CL17 chlorine analyzer.
SKU: 5444301, 4721600
Phosphax sc LR low range orthophosphate analyzer
Accurate analyzer for measuring the concentration of orthophosphates in the low range of 0.015 - 2 mg/l PO4-P in waste water.
SKU: LXV422.99.33001, LXV422.99.33011
9185 sc Amperometric Ozone Analyzer
The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.
SKU: LXV433.99.00001
Test kit CY-3 for the analysis of cyanuric acid in swimming pool water
Cyanuric acid is a chlorine stabilizer and is used in swimming pool water treatment. The kit contains all the reagents and accessories you need in a robust portable case for field analysis.
SKU: 185102
SulfaVer 4 reagent for the determination of sulfate 2 - 70 mg/L SO4
Hach powder reagent for the determination of sulfates in water samples, waste water and seawater.
SKU: 1206599
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Nessler reagent, 500 ml
For the determination of ammonia and total nitrogen according to Kjeldahl.
SKU: 2119449
Phosphate Reagent Powder Pillows 0,02 - 2,50 mg/L PO4
Powder Pillows Reagents for Orthophosphate determination, measuring range 0,02 - 2,50 mg/L PO4.
SKU: 212528
Powder pillows indicator, bromphenol blue, 100 pk
Powder indicator in sealed containers for determination of acidity and alkalinity.
SKU: 1455099
Sorting:
LCK390 cuvette test AOX, 0,05 - 3,0 mg/L
LCK390 cuvette test for determination of AOX, measurement range 0,05 - 3,0 mg/L
SKU: LCK390
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
PHOSPHAX sc analyzer cleaning solution
Cleaning solution for the Hach Lange process orthophosphate analyzer.
SKU: LCW870
SC1000 Probe module for 4 sensors, Prognosys
SC1000 Probe module for 4 sensors.
SKU: LXV400.99.0G021
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
LT200 / DRB200 Dry thermostat with 2 blocks, 6x13 mm and 4x20 mm per block
LT200 is a digital thermoreactor with2 separately controllable heating blocks with separate protection covers, both blocks each with 6x13mm and 4x20mm holes. The thermostat meets the requirements for fast and high-quality decomposition in municipal, industrial and service laboratories.
SKU: LTV082.99.51002
Process COD analyzer EZ7000 - EZ7004 (dichromate method)
Online titrimetric analyzers of chemical oxygen demand in wastewater. Depending on the model, the EZ700X measures COD in the range of 5 - 10,000 mg/L O2.
SKU: EZ7000.990A1C02
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
pH Buffer Solution, pH 10.01
pH Buffer Solution, concentration pH 10.01± 0,02, 500 mL.
SKU: 2283649.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
Pocket Pro+ Multi 2 Tester for pH / Cond / TDS / Salinity with Replaceable Sensor
Pocket Pro+ Multi 2 tester, parameter: Cond, TDS, Salinity, Temp, pH.
SKU: 9532800
Glass square sample cell 25 mm, matched pair
Accessory for spectrophotometers / spectral analysis of liquids.
SKU: 2095000
Powder Pillows for the determination of chlorine, iodine and bromine (DPD)
Hach reagent for determination of chlorine / iodine / bromine concentration by DPD method.
SKU: 1406499
DR300 Pocket Colorimeter, Ammonia Nitrogen
Hach DR 300 pocket single-parameter colorimeter for measuring Ammonia Nitrogen consentration in water. Measuring range: 0.01 - 0.80 mg/L NH3-N..
SKU: LPV445.99.40110
Cl17 Chlorine Analyzer Maintenance Kit
Pre-assembled tubing for annual maintenance of the Hach CL17 chlorine analyzer.
SKU: 5444301, 4721600
Phosphax sc LR low range orthophosphate analyzer
Accurate analyzer for measuring the concentration of orthophosphates in the low range of 0.015 - 2 mg/l PO4-P in waste water.
SKU: LXV422.99.33001, LXV422.99.33011
9185 sc Amperometric Ozone Analyzer
The 9185 sc from Hach is a single-channel, online industrial sensor that measures ozone in drinking water treatment plants, distribution networks and other applications where ppm and ppb ozone monitoring is required. This instrument uses an amperometric method to measure the concentration of ozone. The membrane allows selective diffusion of ozone molecules to the amperometric sensor. Suitable for use in water with low conductivity.
SKU: LXV433.99.00001
Test kit CY-3 for the analysis of cyanuric acid in swimming pool water
Cyanuric acid is a chlorine stabilizer and is used in swimming pool water treatment. The kit contains all the reagents and accessories you need in a robust portable case for field analysis.
SKU: 185102
SulfaVer 4 reagent for the determination of sulfate 2 - 70 mg/L SO4
Hach powder reagent for the determination of sulfates in water samples, waste water and seawater.
SKU: 1206599
Reagent set for chlorine analyzer CL17sc, ultra low range
The reagent kit includes a total chlorine indicator solution, a total chlorine buffer solution, and a DPD compound.
SKU: 9791100
Nessler reagent, 500 ml
For the determination of ammonia and total nitrogen according to Kjeldahl.
SKU: 2119449
Phosphate Reagent Powder Pillows 0,02 - 2,50 mg/L PO4
Powder Pillows Reagents for Orthophosphate determination, measuring range 0,02 - 2,50 mg/L PO4.
SKU: 212528
Powder pillows indicator, bromphenol blue, 100 pk
Powder indicator in sealed containers for determination of acidity and alkalinity.
SKU: 1455099

