998 (90) 174-57-84
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
SKU: S16M002
Manufacturer: Hach
Availability: Order only
Solution for cleaning the outside of the pH electrode to remove complex protein deposits. Ideal for cleaning a pH sensor after use in dirty water (waste water) or bioactive samples. If cleaning recommendations are followed, the electrode's sensitivity will remain high for a long period of time. Can also be used to extend the life of old or dirty electrodes.
Formula: sodium hypochlorite
Volume: 250 mL
Expiration date: 18 months from the date of production.
Specifications Recommended products
Specifications
Specifications
| Type | Liquid reagents |
| Quantity | |
| Shelf life | 18 months |
| Formula | Sodium Hypochlorite |
Recommended products
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Compare
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
51350020 Calibration solution pH 7.00, 6 x 250 ml
Buffer solution with a pH value of 7.00 ± 0.02 for calibrating pH meters and electrodes.
SKU: 51350020
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
pH Buffer Powder Pillows, pH 7.00 (yellow) 50 pcs.
Powder pH buffer in individually sealed sachets. The color coding makes it easy to identify the pH value of the prepared solution.
SKU: 2227066
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
HI6031 Conductivity standard 1413 µS/cm (500 ml)
HI6031 is a high quality 1413 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6031
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
51107892 Electrolyte for DX337-Ba electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX337-Ba ion selective electrode.
SKU: 51107892
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
Easy cleaning of the pH electrode after use in samples containing fats, greases and oils.
SKU: 2964449
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
Recommended products
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
30111138 Buffer pH 9.180 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111138
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
Certified Buffer Standard Solution, pH 7,413
Certified Buffer Standard Solution, pH 7,413 ±0.010 pH at 25°C, 500 mL.
SKU: S11M005
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
30111134 Buffer pH 2.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111134
