998 (90) 174-57-84
Cl17 Chlorine Analyzer Maintenance Kit
SKU: 5444301, 4721600
Manufacturer: Hach
Availability: Order only
Annual Maintenance Kit (for CL17 tools sold after March 2000).
The kit contains pre-assembled reagent tubing, reagent caps, and fittings that must be replaced annually.
The tubing of the pump module must be replaced at intervals of three to six months.
NOTE: For instruments purchased before April 2000, order part number is 4721600.
Recommended products
Recommended products
Field case for portable HQD meters
Convenient plastic case for transporting portable HQD meters with probes / electrodes.
SKU: 5825800
Compare
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
Tungsten Lamp
Tungsten lamp (incandescent lamp). Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23778
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
Glass cuvette for samples 25 mm., 6 pieces with caps
Sample cuvette. For use with Hach DR900 colorimeter.
SKU: 2401906
SKU: 1.14944.0001
Replacement cartridge for AN-ISE sc, A-ISE sc and N-ISE sc probes
Cartridge for process Hach Lange ion-selective sensors for the determination of ammonium and nitrates.
SKU: LZY694
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
SKU: 1200-3317-0002-00
SKU: 004.413
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
Rectangular sample cells, 10 mm, polystyrene, 4.5 ml
Sample cuvettes, rectangular, 1 cm, polystyrene, 4.5 ml, optical path length 10 mm.
SKU: 2743400
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
2084900 Glass cell for laboratory turbidity meters, 30 ml, 6 pcs. with caps
Glass cuvette for samples. Used for turbidimeters 2100N, 2100AN and Lab RATIO.
SKU: 2084900
UV protection shield for SC4200c and SC4500 controllers
Sun protection panel for SC controllers.
SKU: LXZ524.99.00004
SKU: 006.593
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Automatic cleaning module for turbidity meters TU5300sc and TU5400sc
Cleaning the turbidity meter takes time. The automatic cleaning module for the TU5300sc and TU5400sc turbidity meters cleans automatically, increasing instrument uptime.
SKU: LQV159.98.00002
Recommended products
Quartz square sample cell, 10 mm
Quartz glass sample cuvette, 10 x 10 mm, path length 10 mm, volume = 3.5 ml. Supplied with caps, matched pair or 1 piece.
SKU: 2624410, 4822800
SKU: 1200-3317-0002-00
Replacement halogen bulb for DR3900 / DR2700 / DR2800 / DR3800 / Lico 500
Replaceable halogen lamp. Suitable for use with Hach DR3900 / DR2700 / DR2800 / DR3800 / Lico 500 spectrophotometers.
SKU: LZV565
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
White caps for Culture Tube
The Hach screw cap uses a durable seal to ensure the vial is tight.
SKU: 2275800, 2241106
Vials for chromatography, 10 and 20 ml
Vials for headspace analysis. They are an analogue of a wide range of brands such as Agilent, Gerstel, etc.
SKU: #18Headspace vial
Replacement sensor for pH meter Pocket Pro+
For Pocket Pro+ testers only
SKU: 9532001
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
