998 (90) 174-57-84
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
SKU: OEC30-PSt7-YAU
Manufacturer: РreSens
Availability: Order only
The beveled cap with built-in PSt7 sensor is specially designed to reduce air bubble formation when measuring dissolved oxygen with the OXYPro WR and WRM probes.
Maximum measuring range 0 - 100% O2 with detection limit 0.03% O2 / 20 ppb.
Description Specifications Recommended products
Description
Description
Replaceable cap with built-in sensor is available in different versions:
- OEC30-PSt7-YAU-YOP - USP Class VI compliant for bioprocess monitoring
- OEC30-PSt7-YAU-CAF - Food Safe
- OEC30-PSt7-YAU-PTFE - with hydrophobic teflon coating for measurements in aggressive media
It can withstand steam sterilization and CIP cleaning.
Benefits of OEC30-PSt7-YAU from PreSens
- Maximum measuring range 0 - 100% O2
- Reduced air bubble formation
- Various versions: USP Class VI compliant, food grade, corrosive environments
- Compatible with SIP (max. + 140 °C, 1.5 atm) and CIP (+ 80 °C, 2% NaOH)
- Easy replacement thanks to barcode calibration
- Pressure resistant
Specifications
- Measurement range: Optimal: 0 - 50 % O2, 0 - 500 hPa, 0 - 22.5 mg/L; Max.: 0 - 100 & O2, 0 - 1000 hPa, 0 - 45.0 mg/L
- Limit of detection: 0.03 % O2, 0.3 hPa, 0.015 mg/L
- Response time (t90):
OEC30-PSt7-YAU-YOP - Gaseous O2 < 10 sec.; Dissolved O2 < 30 sec.
OEC30-PSt7-YAU-CAF - Gaseous O2 < 15 sec.; Dissolved O2 < 40 sec.
OEC30-PSt7-YAU-PTFE - Gaseous O2 < 85 sec.; Dissolved O2 < 100 sec. - Compatibility: Aqueous solutions, ethanol, methanol
- No cross-sensitivity to: pH 1 - 14, CO2, H2S, SO2, ionic species
- Cross-sensitivity to: Chlorine gas; Organic solvents such as pure acetone, toluene, chloroform or methylene chloride
- Cleaning procedure: 3 % H2O2, acidic agents (HCl, H2SO4) max. 4 - 5 %; Cleaning agents containing ClO2 at room temperature
- Calibration: Two-point calibration in oxygen-free (e. g. nitrogen 5.0, 1 % sodium sulfite solution) and air-saturated environment (20.9 % oxygen, air-saturated water)
- Pressure resistance: 10 mbar up to 12 bar
- Temperature range operation: Optimal: 0 °C to + 50 °C; Max.: - 40 °C to + 90 °C
Specifications
| Application area | Environmental monitoring, Pharmaceuticals, Wastewater, Food production, Drinking water, Process control |
| Industry | Ecology, Pulp and paper, Pharmaceutical, Chemical, Food and Beverage, Municipal |
| Parameters | Dissolved oxygen |
| Measurement Range | 0 - 22.5 mg/L O2 |
| Operating temperature range | 0 - 50 °C |
Recommended products
SKU: HI7040L
CompareLaboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Optical point SP-PSt9 for oxygen sensor PreSens
Optical point SP-PSt9 for non-invasive measurement of ultra-low oxygen content in the range of 0 - 200 ppmv O2, with a detection limit of 0.5 ppmv oxygen.
SKU: SP-PSt9-NAU-D3-OIW
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
Dissolved oxygen sensor Intellical LBOD101 for BOD measurement
Luminescent / optical dissolved oxygen (LDO) sensor for BOD measurement, 1 m cable.
SKU: LBOD10101
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
SKU: OXI
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
SKU: 114.000
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
Fast response oxygen sensor for PreSens OXYPro WR and WRM probes.
SKU: OEC-PSt7-NAU-OIW
SKU: 30298424
SKU: OptiOx
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
Recommended products
Replacement oxygen sensor for OXYBase WR probes
The PreSens cap is made of stainless steel with an integrated PSt3 sensor.
SKU: OEC-PSt3-NAU
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10H
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
SKU: OptiOx
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
