998 (90) 174-57-84
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
SKU: OEC-PSt7-YAU
Manufacturer: РreSens
Availability: Order only
OEC-PSt7-YAU is available in different versions:
- YOP is USP Class VI compliant for biotechnology analysis;
- CAF is food safe;
- PTFE with hydrophobic teflon coating for oxygen measurements in corrosive environments.
Description Specifications Recommended products
Description
Description
Replaceable cap made of stainless steel with built-in sensor type PSt7. Pressure resistant design. Maximum measuring range 0 - 100% O2 with a detection limit of 0.03% O2. It can withstand steam sterilization SIP (max. + 140 °C, 1.5 atm) and CIP (2% NaOH, + 80 °C).
The OEC (Oxygen Exchange Cap) can be screwed onto the top of the OXYPro WR / WRM probe fitting. Replacing a used sensor is very easy as the sensor can be calibrated with one quick scan of the barcode.
Technical Data
- Measurement range: Optimal: 0 - 50 % O2, 0 - 500 hPa, 0 - 22.5 mg/L; Max.: 0 - 100 % O2, 0 - 1000 hPa, 0 - 45.0 mg/L
- Limit of detection: 0.03 % O2, 0.3 hPa, 0.015 mg/L
- Response time (t90):
OEC-PSt7-YAU-YOP Gaseous O2 < 10 sec Dissolved O2 < 30 sec.
OEC-PSt7-YAU-CAF Gaseous O2 < 15 sec Dissolved O2 < 40 sec.
OEC-PSt7-YAU-PTFE Gaseous O2 < 85 sec Dissolved O2 < 100 sec. - Compatibility: Aqueous solutions, ethanol, methanol
- No cross-sensitivity to: pH 1 - 14, CO2, H2S, SO2, ionic species
- Temperature range operation: Optimal: 0 °C to + 50 °C; Max.: - 40 °C to + 90 °C
Specifications
| Application area | Food production, Drinking water, Process control |
| Type | Industrial |
| Industry | Municipal |
| Parameters | Dissolved oxygen |
| Measurement Range | 0 - 22.5 mg/L O2 |
| Operating temperature range | 0 - 40 °C |
Recommended products
Inline oxygen sensor Orbisphere K1100 series, 0 - 40 ppm, 28 mm fitting
The Orbisphere K1100-S00H is a high-precision, fluorescent dissolved oxygen sensor optimized for energy applications.
SKU: K1100-S00H
Compare
SKU: HD-200FL
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, 28 mm fitting
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
SKU: HD-480
SKU: OXI
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
SKU: HI7040L
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
SKU: 30298424
Oxygen Probe for In-Line Measurement OIM-PSt6
PreSens OIM-PSt6 is designed for process control and provides accurate and stable O2 measurements in the 0-5% / 0-2 mg/L range, with a detection limit of 0.002% / 1 ppb.
SKU: OIM-PSt6
SKU: 92222102
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
Optical point SP-PSt9 for oxygen sensor PreSens
Optical point SP-PSt9 for non-invasive measurement of ultra-low oxygen content in the range of 0 - 200 ppmv O2, with a detection limit of 0.5 ppmv oxygen.
SKU: SP-PSt9-NAU-D3-OIW
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
SKU: 51344611
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
SKU: HD-960L
Recommended products
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
SKU: 30298424
SKU: HD-960L
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
SKU: 51344611
