LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
SKU: LXV416.99.20S01
Manufacturer: Hach
Availability: Order only
LDO sc sensor, seawater version, cable length 10 m - part number LXV416.99.20S01.
The sensor comes with a cable, user manual and two calibration bags.
The sensor is used in conjunction with the online Hach SC series controllers. The complete range of Hach industrial controllers is available at link.
LDO sc process dissolved oxygen sensor; cable 10 meters
SKU: LXV416.99.20001
Solitax highline sc turbidity and suspended solids sensor, stainless steel
SKU: LXV424.99.00200, LXV424.99.02200
Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel
SKU: LXV423.99.00100, LXV423.99.02100
Description Specifications Recommended products Accessories
Description
Description
Dissolved oxygen analysis in seawater with Hach LDO sc
LDO® Hach Immersion / Flow Probes are factory calibrated and ready to use.
Thanks to the optical measurement method, there is no need for electrolyte or membrane changes. The LDO probe requires minimal maintenance. The luminescent method means that the measurement is not affected by any interference.
Many years of practical experience have shown that this method completely overcomes the drawbacks of traditional electrochemical methods for measuring dissolved oxygen.
No interference from the following substances: H2S, pH, K +, Na +, Mg2 +, Ca2 +, NH4 +, Al3 +, Pb2 +, Cd2 +, Zn2 +, Cr (total), Fe2 +, Fe3 +, Mn2 + , Cu2 +, Ni2 +, Co2 +, CN-, NO3-, SO42-, S2-, PO43-, Cl-, anionic surfactants, crude oil, Cl2
Oxygen measurement range: 0.01 - 20 mg/l
Accuracy: ± 0.1 ppm below 5 ppm / ± 0.2 ppm above 5 ppm
Operating temperature range: 0 - 50 ° C
Diameter: 48.25 mm
Length: 254 mm
Case material: stainless steel
Storage conditions: -20 °C - 70 °C
Specifications
Application area | Environmental monitoring, Wastewater |
Type | Industrial |
Industry | Ecology, Municipal |
Parameters | Dissolved oxygen |
Measurement Range | 0 - 20 mg/L O2 |
Recommended products
SC200 Digital 2-channel controller
HACH LANGE is a recognized leader in water analysis solutions. More than 40 different analog and digital sensors can be combined with the SC 200. Thanks to its robust metal housing, the SC 200 is suitable for industrial applications.
SKU: LXV404.99.00551
Dual input meter HQ40D with dissolved oxygen probe LDO101
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD together with dissolved oxygen probe LDO101 with various cable lengths and in various designs.
SKU: HQ40D.99.301000
SC1000 Probe module for 8 sensors
SC1000 Probe module for 8 sensors.
SKU: LXV400.99.20041
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
Accessories
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Recommended products
SC200 Digital 2-channel controller
HACH LANGE is a recognized leader in water analysis solutions. More than 40 different analog and digital sensors can be combined with the SC 200. Thanks to its robust metal housing, the SC 200 is suitable for industrial applications.
SKU: LXV404.99.00551
Dual input meter HQ40D with dissolved oxygen probe LDO101
Portable two-channel multi-parameter device HQ40D for measuring pH, ORP, conductivity, TDS, resistivity, salinity, dissolved oxygen and BOD together with dissolved oxygen probe LDO101 with various cable lengths and in various designs.
SKU: HQ40D.99.301000
SC1000 Probe module for 8 sensors
SC1000 Probe module for 8 sensors.
SKU: LXV400.99.20041
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001