Meters and probes pH Oxygen Conductivity Portable labs Spectrophotometry Turbidimetry Colorimetry Titration Process equipment Online analyzers Refractometers and densitometers Reagents and standards HACH Laboratory equipment Process filtration Quality control of packaging Microbiology Accessories

Inline oxygen sensor Orbisphere K1100 series, 0 - 40 ppm, 28 mm fitting

orbisphere-k1100-s00h-datchik-kisloroda.jpgDissolved oxygen sensor for power engineering

SKU: K1100-S00H

Manufacturer: Orbisphere

Availability: Order only

Order Add to comparison

Optical dissolved oxygen sensor for energy applications. Maintenance free.

Scope of delivery: Sensor only.

Please order controller, sensor cable, flow chamber or process connection separately.


Description

Description

The absence of diaphragm and electrolyte means that the accuracy of the sensor is not affected by process changes such as flow changes. Maintenance and operating costs are significantly reduced. The sensor has been designed to provide mechanical strength to extend service life and optimize total cost of ownership.

The fast response time is ensured by the 2 second measurement frequency. Possibility of accurate measurements at this frequency for 12 months. With no calibration required, the K1100 Series outperforms other optical and electrochemical sensors that show significant drift after just a few months under the same operating conditions. This optical sensor is designed with minimal drift in mind, making it the most stable sensor with the longest calibration intervals available on the market. This is facilitated by a durable module and optimized controller software.

Maintenance is limited to 2 minutes and zero point calibration, provide significant savings over traditional electrochemical sensors and other fluorescent sensors. The use of gas calibration means no chemicals are required and hence the task is easier and safer without sacrificing measurement accuracy.

K1100-S00H Sensor Specifications

Accuracy ± 0.02 ppm or 3 % whichever is greater
Ambient temperature -5 - 50 ° C
Analog Outputs 3 Smart 0/4 to 20 mA (500 Ohm), programmable as linear or trilinear, configurable to send diagnostic or alarm information.
Detection limit 0.015 ppm
Measuring range 0 - 40 ppm dissolved oxygen
Mounting 28mm Orbisphere Fitting
Sample pressure 1 - 20 bar
Weight 0.6 kg
Storage temperature -5 °C - 100 °C
Specifications

Specifications

TypeIndustrial
IndustryPower generation
ParametersDissolved oxygen
Measurement Range0 - 40000 ppb O2
Video
Recommended products

Recommended products

TSS Portable analyzer with immersion probe

TSS Portable analyzer with immersion probe

Portable turbidity meter for wastewater analysis. It can be used as a tool to optimize water treatment quality monitoring or as a simple way to calibrate or verify / validate already installed industrial online sensors.

SKU: LXV322.99.00001

View product Compare

FP 360 sc sensor for detecting petroleum products

FP 360 sc sensor for detecting petroleum products

The FP 360 sc digital fluorescent UV sensor is designed to detect oil products in the water.

SKU: LXV441.99.22101

View product Compare

Solitax inline sc process turbidity and suspended solids sensor

Solitax inline sc process turbidity and suspended solids sensor

Solitax inline sc tube-mounted sensor for turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g/l) in stainless steel with 10 meter cable.

SKU: LXV424.99.00100, LXV424.99.02100

View product Compare

Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb

Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb

Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.

SKU: K1200-S00

View product Compare

Solitax highline sc turbidity and suspended solids sensor, stainless steel

Solitax highline sc turbidity and suspended solids sensor, stainless steel

Solitax highline sc inline sensor for turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 500 g / l), stainless steel.

SKU: LXV424.99.00200, LXV424.99.02200

View product Compare

Solitax ts-line sc submersible turbidity and suspended solids sensor, PVC

Solitax ts-line sc submersible turbidity and suspended solids sensor, PVC

Solitax ts-line sc probe for measuring turbidity (0.001 - 4000 NTU) and suspended solids (0.001-50 g / l). Optics holder and cover made of black PVC. Cable 10 meters.

SKU: LXV423.99.10100, LXV423.99.12100

View product Compare

Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm

Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm

Used in conjunction with Orbisphere controllers.

SKU: M1100-S10

View product Compare

Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm

Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm

Used in conjunction with Orbisphere controllers.

SKU: M1100-S10H

View product Compare

UVAS plus sc sensor for organic load

UVAS plus sc sensor for organic load

UVAS plus sc is an optical sensor for dissolved organics and COD.

SKU: LXV418.99.20001

View product Compare

LDO sc process dissolved oxygen sensor; cable 10 meters

LDO sc process dissolved oxygen sensor; cable 10 meters

LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.

SKU: LXV416.99.20001

View product Compare

Solitax t-line sc, immersion turbidity sensor, 0.001 - 4000 NTU, PVC

Solitax t-line sc, immersion turbidity sensor, 0.001 - 4000 NTU, PVC

Precision turbidity probe. Complies with DIN EN ISO 7027

SKU: LXV423.99.10000, LXV423.99.12000

View product Compare

Solitax hs-line sc submersible turbidity and suspended solids sensor, with wiper, PVC

Solitax hs-line sc submersible turbidity and suspended solids sensor, with wiper, PVC

Probe for determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 500 g / l), with a wiper, PVC material.

SKU: LXV423.99.10200

View product Compare

Inline oxygen sensor Orbisphere K1100 series, 0 - 2000 ppb, 28 mm fitting

Inline oxygen sensor Orbisphere K1100 series, 0 - 2000 ppb, 28 mm fitting

The Orbisphere K1100 is a high-precision, fluorescent dissolved oxygen sensor optimized for energy applications.

SKU: K1100-S00

View product Compare

NITRATAX sc series immersion nitrate sensors

NITRATAX sc series immersion nitrate sensors

The Hach Nitratax sc family includes digital optical sensors for highly accurate determination of nitrate concentration directly in the medium. Nitratax sc nitrate sensors with a high degree of accuracy through direct measurement of UV light, without cross-sensitivity, are ideal for monitoring Maximum Allowable Concentrations.

SKU: LXV415.99.10001

View product Compare

Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm

Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm

Used in conjunction with Orbisphere controllers.

SKU: M1100-S00H

View product Compare

Industrial on-line photometer DCP007-VIS

Industrial on-line photometer DCP007-VIS

Industrial photometer for measuring the color and concentration of chemicals in a line.

SKU: DCP007-VIS

View product Compare

Industrial online photometer DCP007-UV

Industrial online photometer DCP007-UV

Process photometer for measuring the concentration of chemicals and color in a production line.

SKU: DCP007-UV

View product Compare

Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel

Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel

Immersion probe Solitax ts-line sc for the determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g / l). Material - stainless steel

SKU: LXV423.99.00100, LXV423.99.02100

View product Compare

Solitax hs-line sc submersible turbidity and suspended solids sensor with wiper

Solitax hs-line sc submersible turbidity and suspended solids sensor with wiper

Immersion probe Solitax hs-line sc for the determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 500 g / l), with a wiper, stainless steel.

SKU: LXV423.99.00200

View product Compare

Ultraturb sc bypass turbidity sensors

Ultraturb sc bypass turbidity sensors

The Hach Ultraturb sensor is the most versatile turbidity meter in the Hach range. With its wide measurement range (0 - 1000 NTU) and optional automatic cleaning system, the Ultraturb is well suited for any application, from wastewater filtration and municipal distribution systems to raw water monitoring for further treatment.

SKU: LPV415.99.02001

View product Compare

Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm

Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm

Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.

SKU: K1200-S00H

View product Compare

Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, 28 mm fitting

Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, 28 mm fitting

Used in conjunction with Orbisphere controllers.

SKU: M1100-S00

View product Compare

LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m

LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m

Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.

SKU: LXV416.99.20S01

View product Compare

TSS sc turbidity and total suspended solids sensors

TSS sc turbidity and total suspended solids sensors

Hach's TSS sc sensors provide solutions for the measurement of suspended solids and turbidity in drinking water, wastewater and industrial processes. The probes are equipped with self-cleaning options and unique technology to improve measurement accuracy, as well as options for use in hazardous areas.

SKU: LXV323.99.10001

View product Compare

Accessories

Accessories

Optical point for M1100 and K1100 dissolved oxygen sensors

Optical point for M1100 and K1100 dissolved oxygen sensors

Replacement ortical spot for Orbisphere dissolved oxygen sensors.

SKU: M1100-L, M1100-H

View product Compare

Orbisphere 410 Controller for O2 Oxygen Sensor

Orbisphere 410 Controller for O2 Oxygen Sensor

The ORBISPHERE high precision instrument is designed for inline measurement of oxygen concentration in industry.

SKU: 410A/W1C00000

View product Compare

Orbisphere 510 controller for oxygen sensors

Orbisphere 510 controller for oxygen sensors

Industrial oxygen analyzer. Up to three sensors can be connected.

SKU: 510MMM/W1C0000

View product Compare

Recommended products