Solitax hs-line sc submersible turbidity and suspended solids sensor, with wiper, PVC
SKU: LXV423.99.10200
Manufacturer: Hach
Availability: Order only
Scope of delivery: turbidity / suspended solids sensor with 10 meter cable and user manual.
Operating temperature range: 0 - 40 ° C. Sensor weight 1.38 kg. Diameter 60 mm.
The cable length can be extended upon request. The maximum cable length from sensor to controller is 100 meters.
The sensor is used in conjunction with Hach digital controllers .
LDO sc process dissolved oxygen sensor; cable 10 meters
SKU: LXV416.99.20001
Solitax highline sc turbidity and suspended solids sensor, stainless steel
SKU: LXV424.99.00200, LXV424.99.02200
Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel
SKU: LXV423.99.00100, LXV423.99.02100
Description Specifications Downloads Recommended products Accessories
Description
Description
Accurate measurements of suspended solids and turbidity, independent of color
Hach Solitax sc sensors provide accurate, color-independent measurement of turbidity and suspended solids in drinking water and wastewater. Self-cleaning device (wiper) prevents biological growth and the ingress of gas bubbles. The reliable operation of this system and the possibility of complete data transfer help improve process control.
Excellent correlation with laboratory analysis
Solitax sc sensors show exceptional correlation with laboratory analysis. Real-time measurements not only save manual analysis time, but also provide important real-time measurements that can be used to more efficiently operate the installation.
Fully serviceable sensors
Solitax sc sensors are fully serviceable, which often doubles their lifespan.
Simple one-point calibration
Factory calibrated according to DIN EN ISO 7027 to ensure long term calibration stability. Calibration is performed using a simple factor correction procedure.
Multi-channel, multi-parameter system
Several Solitax sc sensors can be installed on one Hach SC controller. The same controller can also support any combination of parameters. All sc Hach probes are "plug and play" and require no complicated wiring or configuration.
The measuring principle is based on a combined infrared absorption scattered light technique that measures the lowest turbidity values in accordance with DIN EN 27027 just as precisely and continuously as high sludge content. The suspended solids content is measured in accordance with DIN 37414. Using this method, the light scattered sideways by the turbidity particles is measured over an angle of 90°. The measurement data is displayed and processed with the help of a controller.
Specifications
Application area | Environmental monitoring, Wastewater, Drinking water, Beverages, Process control |
Type | Industrial |
Industry | Ecology, Pulp and paper, Pharmaceutical, Glass, Power generation, Transport, Chemical, Food and Beverage, Municipal |
Parameters | Turbidity, Suspended solids |
Measurement Range | 0,001 mg/L - 500 g/L |
Measurement Range (2) | 0,001 - 4000 NTU |
Downloads
User Manual: Solitax hs-line sc Turbidity and Suspended Solids immersion probe, with wiper, PVC (LXV423.99.10200) |
Recommended products
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
SC1000 Probe module for 4 sensors, Prognosys
SC1000 Probe module for 4 sensors.
SKU: LXV400.99.0G021
SC1000 Probe module for 8 sensors
SC1000 Probe module for 8 sensors.
SKU: LXV400.99.20041
Solitax highline sc turbidity and suspended solids sensor, stainless steel
Solitax highline sc inline sensor for turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 500 g / l), stainless steel.
SKU: LXV424.99.00200, LXV424.99.02200
Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel
Immersion probe Solitax ts-line sc for the determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g / l). Material - stainless steel
SKU: LXV423.99.00100, LXV423.99.02100
Solitax t-line sc, immersion turbidity sensor, 0.001 - 4000 NTU, PVC
Precision turbidity probe. Complies with DIN EN ISO 7027
SKU: LXV423.99.10000, LXV423.99.12000
Solitax ts-line sc submersible turbidity and suspended solids sensor, PVC
Solitax ts-line sc probe for measuring turbidity (0.001 - 4000 NTU) and suspended solids (0.001-50 g / l). Optics holder and cover made of black PVC. Cable 10 meters.
SKU: LXV423.99.10100, LXV423.99.12100
Accessories
Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel
Immersion probe Solitax ts-line sc for the determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g / l). Material - stainless steel
SKU: LXV423.99.00100, LXV423.99.02100
Solitax t-line sc, immersion turbidity sensor, 0.001 - 4000 NTU, PVC
Precision turbidity probe. Complies with DIN EN ISO 7027
SKU: LXV423.99.10000, LXV423.99.12000
Solitax ts-line sc submersible turbidity and suspended solids sensor, PVC
Solitax ts-line sc probe for measuring turbidity (0.001 - 4000 NTU) and suspended solids (0.001-50 g / l). Optics holder and cover made of black PVC. Cable 10 meters.
SKU: LXV423.99.10100, LXV423.99.12100
Solitax inline sc process turbidity and suspended solids sensor
Solitax inline sc tube-mounted sensor for turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g/l) in stainless steel with 10 meter cable.
SKU: LXV424.99.00100, LXV424.99.02100
Recommended products
1200-S sc Digital pH sensor for SC controller
Hach offers a wide range of analog and digital pH and ORP sensors to meet your in-line pH or ORP monitoring needs in water or other liquids.
SKU: LXV426.99.10001
SC1000 Probe module for 4 sensors, Prognosys
SC1000 Probe module for 4 sensors.
SKU: LXV400.99.0G021
SC1000 Probe module for 8 sensors
SC1000 Probe module for 8 sensors.
SKU: LXV400.99.20041
Solitax highline sc turbidity and suspended solids sensor, stainless steel
Solitax highline sc inline sensor for turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 500 g / l), stainless steel.
SKU: LXV424.99.00200, LXV424.99.02200
Solitax ts-line sc submersible turbidity and suspended solids probe, stainless steel
Immersion probe Solitax ts-line sc for the determination of turbidity (0.001 - 4000 NTU) and suspended solids (0.001 - 50 g / l). Material - stainless steel
SKU: LXV423.99.00100, LXV423.99.02100
Solitax t-line sc, immersion turbidity sensor, 0.001 - 4000 NTU, PVC
Precision turbidity probe. Complies with DIN EN ISO 7027
SKU: LXV423.99.10000, LXV423.99.12000
Solitax ts-line sc submersible turbidity and suspended solids sensor, PVC
Solitax ts-line sc probe for measuring turbidity (0.001 - 4000 NTU) and suspended solids (0.001-50 g / l). Optics holder and cover made of black PVC. Cable 10 meters.
SKU: LXV423.99.10100, LXV423.99.12100