Reagents and standards HACH
Sorting:
Phosphate, ortho, Reagent Set 0.23 - 30.00 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.23 - 30.00 mg / l PO4. The reagent volume is sufficient for 100 analyzes.
SKU: 2244100
LCA709 Addista Multi parameter standard solution
System for Analytical Quality Assurance (AQA), consisting of one combined standard/spiking solution and two round robin test solutions.
SKU: LCA709
Standard solution, cobalt, 1000 mg/L as Co (NIST)
Standard solution, cobalt, 100 mL. Concentration: 1000 mg/L as Co (NIST).
SKU: 2150342
LCK427 Residual Hardness cuvette test, 0,02 - 0,6 °dH (Ca+Mg)
LCK427 cuvette test for determination of residual hardness, measuring range 0,02 - 0,6 °dH.
SKU: LCK427
LCK355 Silver cuvette test, 5 - 2500 mg/L Ag
Test kit for the determination of Silver, two measuring ranges 5 - 400 mg/L Ag / 400 - 2500 mg/L Ag.
SKU: LCK355
Silica Reagent Set, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 40 analyzes.
SKU: 2581400
Phosphate (total and ortho), TNT, 0,06 - 3,5 mg/L PO4
Phosphate, (total and ortho) TNT reagent kit, measuring range 0,06 - 3,5 mg/L PO4.
SKU: 2742745
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL.
SKU: 1461142
Sulfide Reagent Set, 5 - 800 µg/L S2-
Hach reagent kit for the determination of Sulfide 5 - 800 μg / l S2-. The kit is enough for 100 analyzes.
SKU: 2244500
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
Nitrogen-Ammonia Reagent Set, Nessler, 0.02-2.50 mg/L NH3-N
Hach reagents for the determination of a Nitrogen-Ammonia by the Nessler method in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 250 tests. Range 0.02-2.50 mg / L NH3-N.
SKU: 2458200
Iron Reagent Solution Pillows, 0,009 - 1,400 mg/L Fe
Reagent Solution Pillows for Iron determination, measuring range 0,009 - 1,400 mg/L Fe.
SKU: 230166
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Phosphonate Reagent Set, Powder Pillows, 0,02 - 125 mg/L PO4
Powder reagents for the determination of phosphonates in water.
SKU: 2429700
Test kit BC-3 for analysis of boiler and cooling water
The kit includes everything you need to measure important parameters in boiler and cooling water: alkalinity, chloride concentration, total chlorine, hardness, iron, pH, phosphates, silica and sulphites.
SKU: 2350500
ManVer 2 Hardness indicator powder pillows, 100 pcs
Indicator for total hardness titrations.
SKU: 85199
Test kit, carbon dioxide, model CA-DT
Test kit, carbon dioxide; range 10 - 1,000 mg/L CO2.
SKU: 2064100
Stablcal Stabilised Formazine Turbidity Standard, 100 NTU, 100 mL / 500 mL
Ready to use, stabilised Formazine Primary standard solution in bottle, 100 NTU. Stablcal Stabilized Formazin Turbidity Standards are true Formazin dilutions developed for use in any turbidimeter. For TL23, TU52, 2100Q, TL2300, TL2350 series.
SKU: 2660242, 2660249
Stablcal turbidity Standards Calibration Kit, 100 mL / 500 mL
Stablcal Standards Calibration Kit. Stablcal Stabilised Formazin Turbidity Standards are true Formazin dilutions developed for use in any turbidimeter. Concentration < 0,1, 20, 200, 1000, 4000, 7500 NTU.
SKU: 2659510, 2659500
LCK328 Potassium cuvette test, 8 - 50 mg/L K
Potassium reagent kit, measuring range 8 - 50 mg / L K.
SKU: LCK328
LCA700 Addista Multi parameter standard solution
System for Analytical Quality Assurance (AQA), consisting of one combined standard/spiking solution and two round robin test solutions.
SKU: LCA700
LCK345 Phenols cuvette test 0.05 - 5.0 mg/L
Test kit for phenols determination, measuring range 0.05 - 5.0 mg / l.
SKU: LCK345
LCK326 Magnesium cuvette test, 0,5 - 50 mg/L Mg
Magnesium reagent kit, measuring range 0,5 - 50 mg/L Mg.
SKU: LCK326
Sorting:
Phosphate, ortho, Reagent Set 0.23 - 30.00 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.23 - 30.00 mg / l PO4. The reagent volume is sufficient for 100 analyzes.
SKU: 2244100
LCA709 Addista Multi parameter standard solution
System for Analytical Quality Assurance (AQA), consisting of one combined standard/spiking solution and two round robin test solutions.
SKU: LCA709
Standard solution, cobalt, 1000 mg/L as Co (NIST)
Standard solution, cobalt, 100 mL. Concentration: 1000 mg/L as Co (NIST).
SKU: 2150342
LCK427 Residual Hardness cuvette test, 0,02 - 0,6 °dH (Ca+Mg)
LCK427 cuvette test for determination of residual hardness, measuring range 0,02 - 0,6 °dH.
SKU: LCK427
LCK355 Silver cuvette test, 5 - 2500 mg/L Ag
Test kit for the determination of Silver, two measuring ranges 5 - 400 mg/L Ag / 400 - 2500 mg/L Ag.
SKU: LCK355
Silica Reagent Set, 3 - 1000 µg/L SiO2
Hach reagent kit for the determination of silicon dioxide in the ultra-low range 3 - 1000 μg/l SiO2. The kit is enough for 40 analyzes.
SKU: 2581400
Phosphate (total and ortho), TNT, 0,06 - 3,5 mg/L PO4
Phosphate, (total and ortho) TNT reagent kit, measuring range 0,06 - 3,5 mg/L PO4.
SKU: 2742745
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL.
SKU: 1461142
Sulfide Reagent Set, 5 - 800 µg/L S2-
Hach reagent kit for the determination of Sulfide 5 - 800 μg / l S2-. The kit is enough for 100 analyzes.
SKU: 2244500
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
Nitrogen-Ammonia Reagent Set, Nessler, 0.02-2.50 mg/L NH3-N
Hach reagents for the determination of a Nitrogen-Ammonia by the Nessler method in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 250 tests. Range 0.02-2.50 mg / L NH3-N.
SKU: 2458200
Iron Reagent Solution Pillows, 0,009 - 1,400 mg/L Fe
Reagent Solution Pillows for Iron determination, measuring range 0,009 - 1,400 mg/L Fe.
SKU: 230166
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Phosphonate Reagent Set, Powder Pillows, 0,02 - 125 mg/L PO4
Powder reagents for the determination of phosphonates in water.
SKU: 2429700
Test kit BC-3 for analysis of boiler and cooling water
The kit includes everything you need to measure important parameters in boiler and cooling water: alkalinity, chloride concentration, total chlorine, hardness, iron, pH, phosphates, silica and sulphites.
SKU: 2350500
ManVer 2 Hardness indicator powder pillows, 100 pcs
Indicator for total hardness titrations.
SKU: 85199
Test kit, carbon dioxide, model CA-DT
Test kit, carbon dioxide; range 10 - 1,000 mg/L CO2.
SKU: 2064100
Stablcal Stabilised Formazine Turbidity Standard, 100 NTU, 100 mL / 500 mL
Ready to use, stabilised Formazine Primary standard solution in bottle, 100 NTU. Stablcal Stabilized Formazin Turbidity Standards are true Formazin dilutions developed for use in any turbidimeter. For TL23, TU52, 2100Q, TL2300, TL2350 series.
SKU: 2660242, 2660249
Stablcal turbidity Standards Calibration Kit, 100 mL / 500 mL
Stablcal Standards Calibration Kit. Stablcal Stabilised Formazin Turbidity Standards are true Formazin dilutions developed for use in any turbidimeter. Concentration < 0,1, 20, 200, 1000, 4000, 7500 NTU.
SKU: 2659510, 2659500
LCK328 Potassium cuvette test, 8 - 50 mg/L K
Potassium reagent kit, measuring range 8 - 50 mg / L K.
SKU: LCK328
LCA700 Addista Multi parameter standard solution
System for Analytical Quality Assurance (AQA), consisting of one combined standard/spiking solution and two round robin test solutions.
SKU: LCA700
LCK345 Phenols cuvette test 0.05 - 5.0 mg/L
Test kit for phenols determination, measuring range 0.05 - 5.0 mg / l.
SKU: LCK345
LCK326 Magnesium cuvette test, 0,5 - 50 mg/L Mg
Magnesium reagent kit, measuring range 0,5 - 50 mg/L Mg.
SKU: LCK326

