Meters and probes pH Oxygen Conductivity Portable labs Spectrophotometry Turbidimetry Colorimetry Titration Process equipment Online analyzers Refractometers and densitometers Reagents and standards HACH Laboratory equipment Process filtration Quality control of packaging Microbiology Accessories

Test kit BC-3 for analysis of boiler and cooling water

hach-2350500-test-nabor-bc-3-dlya-kotlovoj-vody.jpgHeatab Cookit Folding StoveGlass Dropper with 0.5 and 1.0 mL marksDPD Chlorine Color DiscColor Disc Iron, TPTZ, 0-0.2 mg/L

SKU: 2350500

Manufacturer: Hach

Availability: Order only

Order Add to comparison

The kit includes everything you need to measure 9 parameters of the boiler and cooling water quality: twenty-four reagents, a volumetric tube, two Erlenmeyer flasks of 50 and 125 ml, a tube clamp, a funnel, two stoppers, color comparator box, filter paper 2 - 3 micron 12.5 cm, vial, Heatab plate with fluel, four mixing bottles, two droppers, adapter, two plastic tubes, seven color discs, instructions and a carrying case.


Description

Description

Collect samples in clean glass or plastic vials. For best results, analyze samples as soon as possible at room temperature.

Some measurement methods use reagents and color discs to visually determine the concentration of a substance in a sample. Other methods use reagents and a titration procedure. Step-by-step instructions and procedures for performing each assay are described in the instructions included with the kit.

Parameters measured by the test set BC-3

  • Alkalinity 0 - 100; 0 - 400 mg/l CaCO3 Titration
  • Chloride 0 - 100; 0 - 400 mg/l Cl- Titration
  • Total chlorine 0 - 3.4 mg/l Cl2 Color disk
  • Hardness, total 0 - 20 mg/l CaCO3 Titration
  • Iron 0 - 0.2; 0 - 2 mg/l Fe Color disk
  • pH 5.6-8.4; 7.4 - 9.6 pH units Color disk
  • Phosphate 0 - 40 mg/l PO4 Color disk
  • Silica 0 - 30 mg/l SiO2 Color disk
  • Sulfite 0 - 20, 0 - 200 mg/l Na2SO3 Titration
Specifications

Specifications

Application areaProcess control
TypePortable-field
IndustryPulp and paper, Power generation, Transport, Chemical
ParametersPhosphate, Sulfite, Alkalinity, Silicon, Hardness, Iron, pH, Chloride, Chlorine total
Recommended products

Recommended products

Test kit CN-39WR: chlorine, hardness, iron and pH

Test kit CN-39WR: chlorine, hardness, iron and pH

The CN-39WR test kit includes the necessary reagents and accessories for the analysis of the concentration of total chlorine, hardness, iron and pH in water.

SKU: 223002

View product Compare

Test kit CA-10WR for water analysis (ecology)

Test kit CA-10WR for water analysis (ecology)

The kit contains all the necessary reagents and equipment in a rugged portable case for analyzing pH, dissolved oxygen and CO2 in the field conditions.

SKU: 143801

View product Compare

Test kit FF-2 for water analysis in fish farming (aquaculture)

Test kit FF-2 for water analysis in fish farming (aquaculture)

Maintaining good water quality is essential for profitable fish farming. The Hach test kit model FF-2 measures 10 key parameters of fresh water quality using titration and colorimetry methods.

SKU: 243001

View product Compare

Test kit CN-67, chlorine and pH (pools and spas)

Test kit CN-67, chlorine and pH (pools and spas)

Chlorine and pH control in pools and spas to maintain safe bathing conditions and protect systems from corrosion.

SKU: 1411100

View product Compare

Pool Master test kit for pool water analysis

Pool Master test kit for pool water analysis

The Hach Pool Master kit combines several tests in one kit: alkalinity, chlorine, hardness and pH, as well as specific tests for total alkalinity, calcium hardness and cyanuric acid.

SKU: 2315001

View product Compare

Test kit FF-1A for water analysis in fish farming (9 parameters)

Test kit FF-1A for water analysis in fish farming (9 parameters)

Test set FF-1A with reagents and accessories for determining 9 parameters of water quality in fish ponds: pH, ammonia, dissolved oxygen, nitrites, chlorides, hardness, alkalinity, carbon dioxide content, supersaturation.

SKU: 243002

View product Compare

Surface water test kit

Surface water test kit

Test kit for monitoring source water and water at treatment facilities. Drop count titration and color disk methods are used to perform analyzes for ammonia, chlorine, pH, nitrate, dissolved oxygen, phosphorus and temperature.

SKU: 2559800

View product Compare

Test kit NPK-1 for assessing soil fertility

Test kit NPK-1 for assessing soil fertility

NPK-1 test kit designed for easy assessment of soil fertility. Provides an efficient way to measure nitrogen (0 - 40 mg/l), phosphorus (0 - 40 mg/l) and potassium in soil.

SKU: 2495900

View product Compare

Test kit CY-3 for the analysis of cyanuric acid in swimming pool water

Test kit CY-3 for the analysis of cyanuric acid in swimming pool water

Cyanuric acid is a chlorine stabilizer and is used in swimming pool water treatment. The kit contains all the reagents and accessories you need in a robust portable case for field analysis.

SKU: 185102

View product Compare

STPL-WRT test kit for wastewater analysis

STPL-WRT test kit for wastewater analysis

Designed as a full-fledged self-contained portable laboratory that provides simple measurements for operators of treatment facilities of water quality parameters: pH, temperature, chlorine, dissolved oxygen, precipitated solids.

SKU: 188703

View product Compare

Test kit for analysis of boiler water, model AL-94 MG-L

Test kit for analysis of boiler water, model AL-94 MG-L

The kit is used to monitor boiler and cooling water and to check for corrosion. Allows you to control alkalinity, chloride content, hardness, iron content and pH.

SKU: 222403

View product Compare

Test kit AL-36B for water analysis in the field of ecology

Test kit AL-36B for water analysis in the field of ecology

The test kit contains reagents and necessary accessories for measuring the levels of acidity, alkalinity, carbon dioxide 1.25 - 100 mg/l, dissolved oxygen 0.2 - 20 mg/l, hardness and pH 4 - 10 in water.

SKU: 180202

View product Compare

Test kit for analysis of boiler feed water, model BSC-1

Test kit for analysis of boiler feed water, model BSC-1

BSC-1 is an economical set for the control of scale formation in small industrial boilers. A drop titration method is used to determine the levels of alkalinity, chloride and hardness in boiler water.

SKU: 2350300

View product Compare

Saltwater aquaculture test kit FF-3

Saltwater aquaculture test kit FF-3

The test kit contains the necessary reagents and accessories for the analysis of water in the field of marine aquaculture. Analyze 10 key salt water parameters to maintain profitable fish production.

SKU: 243003

View product Compare

Accessories

Accessories

Chloride Standard Solution, 100 mg/L, 1 L

Chloride Standard Solution, 100 mg/L, 1 L

ISE Standard Solution. Chloride, 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-. 1 L bottle.

SKU: 2370853

View product Compare

Color comparator box

Color comparator box

Color comparator box for use with Hach color discs.

SKU: 173200

View product Compare

Related products

Buffer Solution, pH 7,00

Buffer Solution, pH 7,00

Buffer Solution, concentration pH 7,00± 0,02, 500 mL.

SKU: 1222249

View product Compare

Bromcresol green - methyl red indicator, powder pillows, 100 pieces

Bromcresol green - methyl red indicator, powder pillows, 100 pieces

Powder Pillows for titration (alkalinity).

SKU: 94399

View product Compare

Hardness 1 buffer solution, 100 mL

Hardness 1 buffer solution, 100 mL

For Hardness titrations with a pH 10,1 ± 0,1 at 20°C.

SKU: 42432

View product Compare

Titrant, silver nitrate 0.0493 N (100 ml)

Titrant, silver nitrate 0.0493 N (100 ml)

For the determination of chlorides by drop titration.

SKU: 2349832

View product Compare

ManVer indicator solution for hardness determination

ManVer indicator solution for hardness determination

Reagent for titrimetric determination of water hardness.

SKU: 42532

View product Compare

Sulfamic acid powder pillows

Sulfamic acid powder pillows

Individually packed sachetes (100 pcs.) with reagent for determination of chlorine, chromium and sulfites.

SKU: 105599

View product Compare

Sulfite 1 Reagent Powder Pillows

Sulfite 1 Reagent Powder Pillows

Reagent for determination of total chlorine, hydrogen peroxide and sulphite. Packaging for 100 tests.

SKU: 220399

View product Compare

Sulfite 3 solution, 100 ml.

Sulfite 3 solution, 100 ml.

For sulfite determination, drop count titration method, iodometric, 0 - 200 mg/L SO3.

SKU: 70532

View product Compare


Show more

Recommended products