998 (90) 174-57-84
Silica Reagent Set, 3 - 1000 µg/L SiO2
SKU: 2581400
Manufacturer: Hach
Availability: Order only
For the determination of silicon dioxide in the ultra-low range by the Heteropoly blue method. Amino acid F ampouled reagent for stability / stability.
Method Hach 8282.
Range: 3 - 1000 μg/L SiO2.
The volume of reagents is sufficient for 40 tests.
Description Specifications Downloads Recommended products
Description
Description
Hach reagent kit 2581400.
Parameter: Silicon Dioxide (Ultra Low Range)
Range: 3 - 1000 μg / L SiO2
Applications: For the determination of trace amounts of soluble silica (silicon dioxide) in pure and ultrapure water.
Method Description: A number of changes are required to adapt the low range silica method for trace level analysis in the ultra low range method. The use of a 1-inchPour-Thru Cell and liquid reagents is absolutely essential. Pour-Thru Cell increases the reproducibility of the optics and reduces the instability of readings that results from moving sample bottles. Liquid reagents provide more reproducible readings and a lower chance of blanks by eliminating the slight haze that can remain with powdered reagents.
The silica and phosphate in the sample react with molybdate ions under acidic conditions to form yellow silicomolybdic acid complexes and phosphomolybdic acid complexes. The addition of citric acid destroys phosphate complexes. The amino acid reagent F is then added to change the yellow silicomolybdic acid color to an intense blue that is proportional to the concentration of silica. The measurement wavelength is 815 nm for spectrophotometers (for the DR 1900 spectrophotometer: 800 nm).
Specifications
| Application area | Reagents, Food production, Drinking water, Brewing, Beverages |
| Type | Liquid reagents |
| Industry | Pharmaceutical, Power generation, Chemical, Food and Beverage |
| Parameters | Silicon |
| Measurement Range | 3 - 1000 µg/L SiO2 |
| Compatibility | DR6000, DR1900, DR3900 |
| Method | Heteropoly-blue |
| Number of tests | 40 |
| Quality control | 110649 |
Downloads
 |
Method description Hach 8282: Silicon dioxide |  |
Recommended products
Chlorine dioxide reagent set 0.02 - 0.50 mg/L ClO2
Hach reagents for the determination of Chlorine Dioxide in the range 0.02 - 0.50 mg / l ClO2. The volume of reagents is enough for 100 tests.
SKU: HPT240
Compare
Phenolphthalein Indicator Solution, 5 g/L, 1 L (APHA)
PH indicator for use in titration.
SKU: 16253
Nitrification inhibitor for BOD, Trichloromethyl Pyridine (TCMP)
The BOD of carbonaceous compounds (CBOD) can be determined by adding a nitrification inhibitor. The CBOD test is recommended for biologically treated wastewater, biologically treated wastewater and river water samples.
SKU: 253335
Nessler reagent, 500 ml
For the determination of ammonia and total nitrogen according to Kjeldahl.
SKU: 2119449
SKU: 1091411000
Molybdovanadate Reagent Solution (100 mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg / l PO4. Volume 100 ml. Number of analyzes - 50.
SKU: 2076032
Free Chlorine Reagent Set for chlorine analyser CL17/CL17sc
Hach reagents for the determination of Free Chlorine by DPD in the analysis of drinking, waste and process water, as well as for the control and monitoring of product quality. The volume of reagents is sufficient for 450 tests. Range 0.03 - 5.00 mg / L Cl2 for CL17 and 0.03 - 10.00 mg / L Cl2 for CL17sc.
SKU: 25569-00
Solution for the determination of molybdenum, 50 mL
Determination of molybdenum in the low range by Hach 8169 method.
SKU: 2352512
181732 Sulfide 2 Reagent, 100 ml
For the determination of sulfide 5-800 µg/l S2-. Convenient dropper bottle.
SKU: 181732
Reagent kit Amtax sc with standard, for range 0.05-20.0 mg/L NH4-N
LCW865 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW865
Standard solution, sodium hydroxide, 0.035 N, 100 ml
Solution for determining the acidity of a water sample.
SKU: 2349332
Tannin & Lignin Reagent Set, 0.1-9.0 mg/L
Hach reagent kit for the determination of tannin and lignin in the range of 0.1 - 9.0 mg/l as tannic acid. The kit is enough for 100 analyzes.
SKU: 2244600
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Nitrogen-Ammonia Reagent Set, Nessler, 0.02-2.50 mg/L NH3-N
Hach reagents for the determination of a Nitrogen-Ammonia by the Nessler method in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 250 tests. Range 0.02-2.50 mg / L NH3-N.
SKU: 2458200
Formaldehyde Reagent Set, 3-500 µg/L CH2O
Hach reagents for the determination of Formaldehyde in water. Range: 3-500 μg / L CH2O. Number of tests - 100.
SKU: 2257700
Calibration Verification set for chlorine analyzers CL17sc
The kit includes the necessary reagents and accessories to complete the Cl17sc Series Chlorine Analyzer Calibration Check procedure.
SKU: 8568200
SKU: 2762133
Hardness Reagent Set, 8-1000 µg/L Ca & Mg as CaCO3
Hach reagents for hardness determination. Range: 8 - 1000 μg / L CaCO3. Number of tests - 100.
SKU: 2603100
SKU: 1.16754.5000
Powder Pillows copper sulfate solution
Reagent for distillation of phenol.
SKU: 1481866
Phosphate, ortho, Reagent Set 0.23 - 30.00 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.23 - 30.00 mg / l PO4. The reagent volume is sufficient for 100 analyzes.
SKU: 2244100
Hardness reagent kit, 4 - 1000 μg/L CaCO3
Determination of ultra-low level of water hardness by the chlorophosphonazo method.
SKU: 2603101
Chlorine Liquid DPD Reagent 0.02-2.0mg/L Cl2 free
Hach reagents for the determination of Free Chlorine in the low range by DPD method. The volume of reagents is enough for 100 tests.
SKU: HPT210
Recommended products
Reagent A for Phosphax sc LR Analyzer
Reagent for Hach Lange Low Range Orthophosphate Analyzer.
SKU: LCW956
2319800 Reagent kit for chloride determination, 0.1–25.0 mg/l Cl⁻
A set of reagents for the determination of chlorides by the mercury thiocyanate method.
SKU: 2319800
Reagent for BioTector 6 N sulfuric acid with Mn catalyst
Container with reagent for process TOC analyzer.
SKU: 2563890, 2038162
Reagent B for Phosphax sc LR Analyzer
Reagent for Hach Lange Low Range Orthophosphate Analyzer.
SKU: LCW957
SKU: 2212129
Chlorine dioxide reagent set 0.02 - 0.50 mg/L ClO2
Hach reagents for the determination of Chlorine Dioxide in the range 0.02 - 0.50 mg / l ClO2. The volume of reagents is enough for 100 tests.
SKU: HPT240
Sulfite reagent set 0.1-5.0 mg/L SO3
Hach reagent kit for the determination of Sulfite in the range of 0.1-5.0 mg/l SO3. The kit is enough for 100 analyzes.
SKU: HPT430
Chlorine, liquid DPD reagent set, 0.02-2.00mg/L Cl2
Hach reagents for the determination of Chlorine in the analysis of drinking, waste and process water, as well as for control and monitoring of product quality. The reagent volume is sufficient for approximately 100 tests. Range 0.02 - 2.00 mg/L Cl2
SKU: HPT310
Molybdovanadate Reagent Solution (500mL) 0.3 - 45.0 mg/L PO4
Hach reagents for the determination of phosphate (ortho). Range: 0.3 - 45.0 mg/l PO4. Volume 500 ml. Number of analyzes - 250.
SKU: 2076049
