998 (90) 174-57-84
Adapter A for DR3900 Spectrophotometer
SKU: LZV846
Manufacturer: Hach
Availability: Order only
Adapter LZV846 for cuvettes. Compatible with 10 mm rectangular cuvettes and 1 in. (25 mm) round cuvettes.
How to install adapter A:
- Open the cuvette compartment.
- Place the adapter into the compartment with the arrow on the cuvette adapter pointing to the back (see photo 2).
Note. The arrow at the top of the adapter indicates the direction of the path of the light beam.
Specifications Recommended products
Specifications
Specifications
| Compatibility | DR3900 |
Recommended products
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
Compare
White caps for Culture Tube
The Hach screw cap uses a durable seal to ensure the vial is tight.
SKU: 2275800, 2241106
Cl17 Chlorine Analyzer Maintenance Kit
Pre-assembled tubing for annual maintenance of the Hach CL17 chlorine analyzer.
SKU: 5444301, 4721600
Premounted Membranes for 9185 sc, 9582 sc
4 pre-assembled membranes for 9182 sc oxygen and 9185 sc ozone sensors.
SKU: 09185=A=3500
Replacement sensor for ORP meter Pocket Pro+
For Pocket Pro + testers only
SKU: 9532101
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
Rectangular sample cells, 10 mm, polystyrene, 4.5 ml
Sample cuvettes, rectangular, 1 cm, polystyrene, 4.5 ml, optical path length 10 mm.
SKU: 2743400
Tungsten Lamp
Tungsten lamp (incandescent lamp). Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23778
UV protection shield for SC4200c and SC4500 controllers
Sun protection panel for SC controllers.
SKU: LXZ524.99.00004
SKU: 001.048
SKU: 004.413
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
Glass cuvette for samples 25 mm., 6 pieces with caps
Sample cuvette. For use with Hach DR900 colorimeter.
SKU: 2401906
SKU: 005.094
Automatic cleaning module for turbidity meters TU5300sc and TU5400sc
Cleaning the turbidity meter takes time. The automatic cleaning module for the TU5300sc and TU5400sc turbidity meters cleans automatically, increasing instrument uptime.
SKU: LQV159.98.00002
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
SKU: 006.593
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Amtax sc analyzer electrode maintenance kit
The kit contains 3 bottles of electrolyte and 3 membranes for the AMTAX sc ammonium analyzer for ranges 2, 3, 4 (0.05 - 1000 mg/L NH4-N).
SKU: LCW868
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
SKU: 51107463
Recommended products
Cl17 Chlorine Analyzer Maintenance Kit
Pre-assembled tubing for annual maintenance of the Hach CL17 chlorine analyzer.
SKU: 5444301, 4721600
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Round plastic sample cell, 1 cm / 10 mL
Round plastic cuvette for 5 and 10 ml samples, optical path length 1 cm.
SKU: 4864302
Premounted Membranes for 9185 sc, 9582 sc
4 pre-assembled membranes for 9182 sc oxygen and 9185 sc ozone sensors.
SKU: 09185=A=3500
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
Replacement cartridge for AN-ISE sc, A-ISE sc and N-ISE sc probes
Cartridge for process Hach Lange ion-selective sensors for the determination of ammonium and nitrates.
SKU: LZY694
