998 (90) 174-57-84
Amtax sc analyzer electrode maintenance kit
SKU: LCW868
Manufacturer: Hach
Availability: Order only
LCW868 accessory kit for maintenance of the Amtax sc industrial ammonium analyzer for ranges 2, 3, 4 (0.05 - 1000 mg/L NH4-N).
Includes: 3 bottles with electrolyte and 3 membranes.
Description Recommended products
Description
Description
For optimal performance, replace the membane cap, electrolyte and electrode regularly. The recommended service interval for the analyzer is once every six months. Some applications may require more frequent membrane and electrolyte changes.
During work with the instrument, the amount of electrolyte should be from 4 to 11 mL. With less electrolyte, the accuracy will be reduced for low measured values in the corresponding measuring range. To determine how much electrolyte is left in the electrode body, refer to the analyzer's user manual.
Note: After replacing the membrane cap and electrolyte, it may take up to 6 hours for optimum performance to be achieved.
Recommended products
Replacement sensor for ORP meter Pocket Pro+
For Pocket Pro + testers only
SKU: 9532101
Compare
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
SKU: 1200-3317-0002-00
SKU: 1.14944.0001
Delivery tubes for Digital Titrator, 5 pk
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 1720500
UV protection housing for SC4200c and SC4500 controllers
Sun protection housing for SC controllers.
SKU: LXZ524.99.00005
SKU: 006.963
SKU: 006.593
Compact Extension Cables Аber Instruments
Aber Instruments are recognized by many of the world's largest brewing companies as the most accurate and reliable instruments for measuring viable yeast cell concentration.
SKU: 1635-24/1
Replacement sensor for pH meter Pocket Pro+
For Pocket Pro+ testers only
SKU: 9532001
2084900 Glass cell for laboratory turbidity meters, 30 ml, 6 pcs. with caps
Glass cuvette for samples. Used for turbidimeters 2100N, 2100AN and Lab RATIO.
SKU: 2084900
Adapter A for DR3900 Spectrophotometer
Replacement adapter for sample cells.
SKU: LZV846
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
Replacement cartridge for AN-ISE sc, A-ISE sc and N-ISE sc probes
Cartridge for process Hach Lange ion-selective sensors for the determination of ammonium and nitrates.
SKU: LZY694
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
LDPE sampling bottle, 250 mL, 12/pc
Bottle for sampling is made of low-density polyethylene (LDPE), 250 mL. A package contains 12 bottles.
SKU: 2087076
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
SKU: 001.048
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
SKU: 51105600
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Recommended products
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
2084900 Glass cell for laboratory turbidity meters, 30 ml, 6 pcs. with caps
Glass cuvette for samples. Used for turbidimeters 2100N, 2100AN and Lab RATIO.
SKU: 2084900
Rectangular plastic cuvette, 10 mm; 100 pieces
Disposable 1.5 ml cuvettes; packing of 100 pieces.
SKU: 2629500
Replacement sensor for ORP meter Pocket Pro+
For Pocket Pro + testers only
SKU: 9532101
Replacement cuvette for turbidity meters TU5300sc and TU5400sc
High quality glass test vial.
SKU: LZY834
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
