998 (90) 174-57-84
UV protection shield for SC4200c and SC4500 controllers
SKU: LXZ524.99.00004
Manufacturer: Hach
Availability: Order only
This protective panel covers the front part of the SC4200c and SC4500 controllers, absorbing UV rays thus protecting the controller from harmful radiation.
A protective screen is recommended for controllers that are installed outdoors.
Recommended products
Recommended products
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
Compare
Replacement halogen bulb for DR3900 / DR2700 / DR2800 / DR3800 / Lico 500
Replaceable halogen lamp. Suitable for use with Hach DR3900 / DR2700 / DR2800 / DR3800 / Lico 500 spectrophotometers.
SKU: LZV565
Rectangular plastic cuvette, 10 mm; 100 pieces
Disposable 1.5 ml cuvettes; packing of 100 pieces.
SKU: 2629500
Vials for chromatography, 10 and 20 ml
Vials for headspace analysis. They are an analogue of a wide range of brands such as Agilent, Gerstel, etc.
SKU: #18Headspace vial
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
Replacement cuvette for turbidity meters TU5300sc and TU5400sc
High quality glass test vial.
SKU: LZY834
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
Round plastic sample cell, 1 cm / 10 mL
Round plastic cuvette for 5 and 10 ml samples, optical path length 1 cm.
SKU: 4864302
Square glass sample cell 25 mm, 2 pcs
Cuvette for the analysis of liquid samples on spectrophotometers.
SKU: 2612602
SKU: 004.413
Amtax sc analyzer electrode maintenance kit
The kit contains 3 bottles of electrolyte and 3 membranes for the AMTAX sc ammonium analyzer for ranges 2, 3, 4 (0.05 - 1000 mg/L NH4-N).
SKU: LCW868
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
Rectangular sample cells, 10 mm, polystyrene, 4.5 ml
Sample cuvettes, rectangular, 1 cm, polystyrene, 4.5 ml, optical path length 10 mm.
SKU: 2743400
Delivery tubes for Digital Titrator, 5 pk
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 1720500
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
SKU: 1.14944.0001
Replacement sensor for Pocket Pro Temperature Tester
For Pocket Pro+ Temperature Tester.
SKU: 9531701
Replacement cap for LDO dissolved oxygen sensors
For Hach laboratory and field sensors LDO101 series.
SKU: 5811200
Recommended products
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
Amtax sc analyzer electrode maintenance kit
The kit contains 3 bottles of electrolyte and 3 membranes for the AMTAX sc ammonium analyzer for ranges 2, 3, 4 (0.05 - 1000 mg/L NH4-N).
SKU: LCW868
Rectangular plastic cuvette, 10 mm; 100 pieces
Disposable 1.5 ml cuvettes; packing of 100 pieces.
SKU: 2629500
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
SKU: 001.048
Square glass sample cell 25 mm, 2 pcs
Cuvette for the analysis of liquid samples on spectrophotometers.
SKU: 2612602
SKU: 004.413
