998 (90) 174-57-84
76615 Hamilton Syringe Cleaner
SKU: 76615
Manufacturer: Hamilton
Availability: In stock
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
MICROLITERT and GASTIGHT® syringes can also be cleaned by adding a voltage rheostat to lower the chamber temperature to 50°C. The device is not effective for frozen pistons or clogged needles.
This syringe cleaner is powered by 220 V.
Recommended products
Recommended products
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
Compare
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
Two-layer silicone septa 17.5 mm
17.5 mm PTFE/silicone septa, compatible with 18 mm screw caps and 10 ml and 20 ml chromatography vials. Work on Agilent instruments, CTC PAL, etc.
SKU: #17,5Siiicone
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
Field case for portable HQD meters
Convenient plastic case for transporting portable HQD meters with probes / electrodes.
SKU: 5825800
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
SKU: 006.963
SKU: 005.094
Premounted Membranes for 9185 sc, 9582 sc
4 pre-assembled membranes for 9182 sc oxygen and 9185 sc ozone sensors.
SKU: 09185=A=3500
Replacement sensor for Pocket Pro Temperature Tester
For Pocket Pro+ Temperature Tester.
SKU: 9531701
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
Quartz square sample cell, 10 mm
Quartz glass sample cuvette, 10 x 10 mm, path length 10 mm, volume = 3.5 ml. Supplied with caps, matched pair or 1 piece.
SKU: 2624410, 4822800
SKU: 004.413
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
SKU: 002.612
Cl17 Chlorine Analyzer Maintenance Kit
Pre-assembled tubing for annual maintenance of the Hach CL17 chlorine analyzer.
SKU: 5444301, 4721600
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Recommended products
Glass cuvette for samples 25 mm., 6 pieces with caps
Sample cuvette. For use with Hach DR900 colorimeter.
SKU: 2401906
LDPE sampling bottle, 250 mL, 12/pc
Bottle for sampling is made of low-density polyethylene (LDPE), 250 mL. A package contains 12 bottles.
SKU: 2087076
SKU: 001.048
Field case for portable HQD meters
Convenient plastic case for transporting portable HQD meters with probes / electrodes.
SKU: 5825800
Sunroof visor for SC4200c and SC4500 controllers
Visor for controllers protection from changes in weather conditions.
SKU: LXZ524.99.00033
SKU: 2810 0100
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Two-layer silicone septa 17.5 mm
17.5 mm PTFE/silicone septa, compatible with 18 mm screw caps and 10 ml and 20 ml chromatography vials. Work on Agilent instruments, CTC PAL, etc.
SKU: #17,5Siiicone
