998 (90) 174-57-84
Premounted Membranes for 9185 sc, 9582 sc
SKU: 09185=A=3500
Manufacturer: Hach
Availability: Order only
Replacement membranes for the ozone (9185 sc) or dissolved oxygen (9182 sc) sensor are installed to hold the electrolyte so that the gas can diffuse and complete the reaction with the sensor.
Under normal operating conditions, the diaphragm should be replaced every six months.
The set contains 4 membranes.
The replacement procedure is described in the sensor user manual.
Note: Do not reinstall a used membrane. After replacing the membrane, allow the sensor to stabilize for at least three hours; After installing a new membrane, calibrate the sensor.
Recommended products
Recommended products
Glass square sample cell 25 mm, matched pair
Accessory for spectrophotometers / spectral analysis of liquids.
SKU: 2095000
Compare
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
SKU: 51107463
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
SKU: 006.963
Crimp caps with pre-installed septa for vials, 20 mm
20 mm aluminum crimp caps for chromatography vials with pre-installed septa.
SKU: #20PTFE/White Silicone
SKU: 12-0308
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
SKU: 1601-0020
Digital Sight 1000 camera for Nikon ECLIPSE microscopes
The Digital Sight 1000 is a cost-effective color camera that can directly display high-definition microscope images on a Full HD display without the need for a PC.
SKU: Digital Sight 1000
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Square glass sample cell 25 mm, 2 pcs
Cuvette for the analysis of liquid samples on spectrophotometers.
SKU: 2612602
Replacement cap for LDO dissolved oxygen sensors
For Hach laboratory and field sensors LDO101 series.
SKU: 5811200
Replacement sensor for CLT10 sc analyzer
Replacement sensor for CLT10 sc total chlorine analyzer. Stainless steel tip.
SKU: 8628900
SKU: 006.593
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
SKU: 2810 0100
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
Replacement sensor for pH meter Pocket Pro+
For Pocket Pro+ testers only
SKU: 9532001
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
Recommended products
Adapter A for DR3900 Spectrophotometer
Replacement adapter for sample cells.
SKU: LZV846
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
Replacement cuvette for turbidity meters TU5300sc and TU5400sc
High quality glass test vial.
SKU: LZY834
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
SKU: 1601-0020
Replacement sensor for Pocket Pro Temperature Tester
For Pocket Pro+ Temperature Tester.
SKU: 9531701
SKU: 006.593
Peristaltic pump ZEUTEC
The ZEUTEC pump is used in conjunction with a liquid analysis drawer for SpectraAlyzer 2.0 analyzers. Due to its small size, the pump can be placed on a bench next to the analyzer or on the instrument itself for easy access.
SKU: 104-A100-1
