Replacement sensor for CLT10 sc analyzer
SKU: 8628900
Manufacturer: Hach
Availability: Order only
Replacement sensor for Hach CLT10sc total chlorine analyzer with stainless steel tip.
Recommended products
Recommended products
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
Replacement sensor for ORP meter Pocket Pro+
For Pocket Pro + testers only
SKU: 9532101
Compact Extension Cables Аber Instruments
Aber Instruments are recognized by many of the world's largest brewing companies as the most accurate and reliable instruments for measuring viable yeast cell concentration.
SKU: 1635-24/1
Flow sensor for TU5300sc and TU5400sc laser turbidity meters
The addition of flow measurement to the TU5300sc or TU5400sc on-line turbidity analyzers provides important information on the status and quality of the potable water production process.
SKU: LQV160.99.00002
Rectangular plastic cuvette, 10 mm; 100 pieces
Disposable 1.5 ml cuvettes; packing of 100 pieces.
SKU: 2629500
Glass cuvette for samples 25 mm., 6 pieces with caps
Sample cuvette. For use with Hach DR900 colorimeter.
SKU: 2401906
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
UV protection housing for SC4200c and SC4500 controllers
Sun protection housing for SC controllers.
SKU: LXZ524.99.00005
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
Premounted Membranes for 9185 sc, 9582 sc
4 pre-assembled membranes for 9182 sc oxygen and 9185 sc ozone sensors.
SKU: 09185=A=3500
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Replacement sensor for Pocket Pro Temperature Tester
For Pocket Pro+ Temperature Tester.
SKU: 9531701
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
LDPE sampling bottle, 250 mL, 12/pc
Bottle for sampling is made of low-density polyethylene (LDPE), 250 mL. A package contains 12 bottles.
SKU: 2087076
Crimp caps with pre-installed septa for vials, 20 mm
20 mm aluminum crimp caps for chromatography vials with pre-installed septa.
SKU: #20PTFE/White Silicone
ZEUTEC drawer with rotating cup for coarse samples
The Rotating Cup Drawer for SpectraAlyzer 2.0 analyzers for coarse sample analysis. Used to determine protein, fat and moisture content in such products as grains, cocoa beans, corn, rice, peas, soybeans, animal feed pellets, etc.
SKU: 110-B6003-1
Replacement sensor for pH meter Pocket Pro+
For Pocket Pro+ testers only
SKU: 9532001
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
Recommended products
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Color comparator box
Color comparator box for use with Hach color discs.
SKU: 173200
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
2084900 Glass cell for laboratory turbidity meters, 30 ml, 6 pcs. with caps
Glass cuvette for samples. Used for turbidimeters 2100N, 2100AN and Lab RATIO.
SKU: 2084900
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Square glass sample cell 25 mm, 2 pcs
Cuvette for the analysis of liquid samples on spectrophotometers.
SKU: 2612602