+998 (90) 174-57-84
White caps for Culture Tube
SKU: 2275800, 2241106
Manufacturer: Hach
Availability: Order only
White caps for Hach tubes / vials.
Screw cap has a firmly bonded fluoropolymer liner, providing a sure and highly inert sealing surface.
Ordering information: 275800 (1 piece) / 2275806 (6 pieces)
Recommended products
Recommended products
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
Compare
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
Automatic cleaning module for turbidity meters TU5300sc and TU5400sc
Cleaning the turbidity meter takes time. The automatic cleaning module for the TU5300sc and TU5400sc turbidity meters cleans automatically, increasing instrument uptime.
SKU: LQV159.98.00002
Two-layer silicone septa 17.5 mm
17.5 mm PTFE/silicone septa, compatible with 18 mm screw caps and 10 ml and 20 ml chromatography vials. Work on Agilent instruments, CTC PAL, etc.
SKU: #17,5Siiicone
UV protection shield for SC4200c and SC4500 controllers
Sun protection panel for SC controllers.
SKU: LXZ524.99.00004
Tube, culture, 16 x 100 mm, pk/6
High quality 11 ml Hach tubes, supplied without cap.
SKU: 2275806
Field case for portable HQD meters
Convenient plastic case for transporting portable HQD meters with probes / electrodes.
SKU: 5825800
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Quartz square sample cell, 10 mm
Quartz glass sample cuvette, 10 x 10 mm, path length 10 mm, volume = 3.5 ml. Supplied with caps, matched pair or 1 piece.
SKU: 2624410, 4822800
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
Replacement cuvette for turbidity meters TU5300sc and TU5400sc
High quality glass test vial.
SKU: LZY834
Cartridge for digital titrator, empty
Hach Handheld Digital Titrator Cartridge (1690001).
SKU: 1449501
BODTrak II Reagent Kit with BOD Bottles
Replacement kit of reagents and bottles for BOD determination.
SKU: 2952440
Crimp caps with pre-installed septa for vials, 20 mm
20 mm aluminum crimp caps for chromatography vials with pre-installed septa.
SKU: #20PTFE/White Silicone
Replacement cap for LDO dissolved oxygen sensors
For Hach laboratory and field sensors LDO101 series.
SKU: 5811200
Deuterium Lamp
Deuterium (UV) lamp. Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23792
AutoSampler 2.0 for ZEUTEC SpectraAlyzer analyzers
The ZEUTEC AutoSampler 2.0 is used in conjunction with the liquid analysis compartment (Liquid Drawer) of the SpectraAlyzer analyzer. Simplifies compositional analysis of samples using near infrared reflectance characteristics.
SKU: 103-A100-1
Service kit 19-KIT-130 for BioTector 3500e
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-130
Plastic tubes with caps, 4 pieces
Tubes for colorimetric analysis of water.
SKU: 4660004
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
Premounted Membranes for 9185 sc, 9582 sc
4 pre-assembled membranes for 9182 sc oxygen and 9185 sc ozone sensors.
SKU: 09185=A=3500
UV protection housing for SC4200c and SC4500 controllers
Sun protection housing for SC controllers.
SKU: LXZ524.99.00005
Recommended products
Molded gray septa 20 mm, PTFE / butyl
20mm molded gray butyl PTFE septa are widely used in the pharmaceutical industry.
SKU: #20PTFE/Butil
Tungsten Lamp
Tungsten lamp (incandescent lamp). Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23778
Set for the preparation of dilution water for BOD 5 test
Set for BOD5 cuvette test.
SKU: LZC901
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Round plastic sample cell, 1 cm / 10 mL
Round plastic cuvette for 5 and 10 ml samples, optical path length 1 cm.
SKU: 4864302
Two-layer silicone septa 17.5 mm
17.5 mm PTFE/silicone septa, compatible with 18 mm screw caps and 10 ml and 20 ml chromatography vials. Work on Agilent instruments, CTC PAL, etc.
SKU: #17,5Siiicone
Polymer Optical Fiber for PreSens Measuring Instruments
Polymer optical fiber serves as a universal connector between the meter and the PreSens. POV with SMA connector is compatible with Fibox, OXY-1 SMA, OXY-1 WM, OXY mini and pH mini meters, as well as pCO2 mini. POF with ST connector is compatible with Microx 4 and OXY-1 ST series meters.
SKU: POF
Glass square sample cell 25 mm, matched pair
Accessory for spectrophotometers / spectral analysis of liquids.
SKU: 2095000
