998 (90) 174-57-84
Automatic cleaning module for turbidity meters TU5300sc and TU5400sc
SKU: LQV159.98.00002
Manufacturer: Hach
Availability: Order only
The automatic cleaning module is an accessory for the TU5300 sc / TU5400 sc in-line laser turbidity meters. The module cleans the sample cuvette at a selected time interval or turbidity limit, increasing instrument uptime.
The cleaning module includes wipers that clean the cuvette even if it has come into contact with water containing iron and manganese.
Includes: cleaning module (with installed silicone wiper); fiber wiper - for more stringent cleaning requirements.
Description Recommended products
Description
Description
Specifications LQV159.98.00002
- IP rating Electronic compartment IP55; process head / automatic cleaning module attached to the instrument and all other functional blocks IP651
- Power Requirements DC 12 V (+2 V, -4 V), 7 VA
- Protection class III
- Pollution degree 2
- Overvoltage category II
- Environmental conditions Indoor use
- Operating temperature 0 to 50 °C
- Storage temperature -40 to 60 ° C
- Humidity 5% to 95% relative humidity, non-condensing
Recommended products
Tungsten Lamp
Tungsten lamp (incandescent lamp). Suitable for use with Hach DR5000, DR6000 spectrophotometers.
SKU: A23778
Compare
Glass square sample cell 25 mm, matched pair
Accessory for spectrophotometers / spectral analysis of liquids.
SKU: 2095000
Square glass sample cell 25 mm, 2 pcs
Cuvette for the analysis of liquid samples on spectrophotometers.
SKU: 2612602
76615 Hamilton Syringe Cleaner
The Hamilton Syringe Cleaner is designed to clean Microliter 7000 Series syringes using heat (370°C) or vacuum cleaning technology to remove any residual contaminants.
SKU: 76615
Cuvette Hach round 1 inch (25 mm), 6 pcs. 10 mL each
Sample Cell. Use with Hach colorimeters and spectrophotometers.
SKU: 2427606
Hach rectangular cuvettes 50 mm, 10 pcs. PMMA
Sample cuvette, polystyrene, 50 x 10 mm, optical path 50 mm, minimum volume 5.0 ml, with lids, pack contains 10 pcs.
SKU: LZP341
Two-layer silicone septa 17.5 mm
17.5 mm PTFE/silicone septa, compatible with 18 mm screw caps and 10 ml and 20 ml chromatography vials. Work on Agilent instruments, CTC PAL, etc.
SKU: #17,5Siiicone
Replacement cap for dissolved oxygen sensor LDO 2 sc
Process Dissolved Oxygen Sensor Cap Replacement Kit.
SKU: 9021150
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
SKU: 001.048
DR Hach Spectrophotometers Filter Set
Consists of filters to check absorption accuracy, stray light and wavelength accuracy. Designed for use with a standard 10 mm cuvette holder. The set is supplied in a sturdy wooden case.
SKU: LZV537
Vials for chromatography, 10 and 20 ml
Vials for headspace analysis. They are an analogue of a wide range of brands such as Agilent, Gerstel, etc.
SKU: #18Headspace vial
SKU: 002.612
Pocket Pro+ Replacement sensor for Multi parameter tester 1
For Pocket Pro+ Multi parameter tester 1 only.
SKU: 9532701
Round plastic sample cell, 1 cm / 10 mL
Round plastic cuvette for 5 and 10 ml samples, optical path length 1 cm.
SKU: 4864302
Delivery tubes for Digital Titrator, 5 pk
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 1720500
Replacement sensor for ORP meter Pocket Pro+
For Pocket Pro + testers only
SKU: 9532101
Adapter A for DR3900 Spectrophotometer
Replacement adapter for sample cells.
SKU: LZV846
Service kit for BioTector 3500 19-KIT-123
Replacement set for maintenance, interval 6 months.
SKU: 19-KIT-123
SKU: 51105600
SKU: 1601-0020
Compact Extension Cables Аber Instruments
Aber Instruments are recognized by many of the world's largest brewing companies as the most accurate and reliable instruments for measuring viable yeast cell concentration.
SKU: 1635-24/1
Pocket Pro+ Replacement sensor for Multi parameter tester 2
For Pocket Pro+ Multi parameter tester 2 only.
SKU: 9532801
Recommended products
LDPE sampling bottle, 250 mL, 12/pc
Bottle for sampling is made of low-density polyethylene (LDPE), 250 mL. A package contains 12 bottles.
SKU: 2087076
Delivery tubes for digital titrator, 90° bend
Delivery tubes for Hach Handheld Digital Titrator (1690001).
SKU: 4157800
Glass cuvette Hach square 1 inch (25 mm), 2 pcs.
Photometric vials. For use with Hach DR1900, DR6000, DR3900 spectrophotometers.
SKU: 2495402, 2495408
2084900 Glass cell for laboratory turbidity meters, 30 ml, 6 pcs. with caps
Glass cuvette for samples. Used for turbidimeters 2100N, 2100AN and Lab RATIO.
SKU: 2084900
Rectangular sample cells, 10 mm, polystyrene, 4.5 ml
Sample cuvettes, rectangular, 1 cm, polystyrene, 4.5 ml, optical path length 10 mm.
SKU: 2743400
Optical point for M1100 and K1100 dissolved oxygen sensors
Replacement ortical spot for Orbisphere dissolved oxygen sensors.
SKU: M1100-L, M1100-H
Sample Cell: Square 25 mm (1 inch) Polystyrene 25mL with Caps
Cuvette for the analysis of liquids on a spectrophotometer. The optical path length is 25 mm (1 inch).
SKU: 2410222, 2410212
Plastic sample container, 120 ml, 250 pcs
Hermetic container for collecting samples, 120 ml. The number of containers in a package is 250 pieces.
SKU: 2552212
SKU: 006.963
