+998 (90) 174-57-84
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
SKU: OEC-PSt7-NAU-OIW
Manufacturer: РreSens
Availability: Order only
The wide range PSt7 sensor is built into a stainless steel cap. This model has a very fast response time (< 3 sec.) And a maximum measuring range of 0 to 100% O2 (detection limit 0.03% O2).
Description Specifications Recommended products
Description
Description
The cap is screwed onto the body of the OXYPro WR / WRM series probe to replace the used probe. It can be easily calibrated with one quick scan of the barcode. This cap cannot be autoclaved.
- Measurement range: Optimal: 0 - 50 % O2, 0 - 500 hPa, 0 - 22.5 mg/L; Max.: 0 - 100 % O2, 0 - 1000 hPa, 0 - 45.0 mg/L
- Pressure resistance: 10 mbar up to 12 bar
- Temperature range operation Optimal: 0 °C to + 50 °C; Max.: - 10 °C to + 70 °C
- Calibration: Two-point calibration in oxygen-free medium (e. g. nitrogen 5.0, 1 % sodium sulfite solution) and air-saturated environment (20.9 % oxygen, air-saturated water)
- Compatibility: Aqueous solutions, ethanol, methanol
- No cross-sensitivity to: pH 1 - 14, CO2, H2S, SO2, ionic species
- Cross-sensitivity to: Chlorine gas; Organic solvents such as pure acetone, toluene, chloroform, or methylene chloride.
Specifications
| Application area | Environmental monitoring, Pharmaceuticals, Wastewater, Process control |
| Type | Industrial |
| Industry | Ecology, Pharmaceutical, Chemical, Food and Beverage, Municipal |
| Parameters | Dissolved oxygen |
| Measurement Range | 0 - 22.5 mg/L O2 |
| Operating temperature range | 0 - 50 °C |
Recommended products
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Compare
Optical point SP-PSt9 for oxygen sensor PreSens
Optical point SP-PSt9 for non-invasive measurement of ultra-low oxygen content in the range of 0 - 200 ppmv O2, with a detection limit of 0.5 ppmv oxygen.
SKU: SP-PSt9-NAU-D3-OIW
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
Oxygen sensitive PET bottle cap OSC-PSt3
The oxygen sensitive PET bottle cap PreSens OSC-PSt3 is designed to measure oxygen penetration into opaque bottles in the range of 0 - 100% O2, 0 - 1000 hPa / 0 - 45 mg/L, 0 - 1400 μmol/L.
SKU: OSC-PSt3
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Oxygen sensitive PET bottle cap OSC-PSt6
The oxygen sensitive PET bottle cap PreSens OSC-PSt6 is designed to measure oxygen penetration in colored bottles in the range of 0 - 5% O2 / 0 - 2 mg/l.
SKU: OSC-PSt6
Replacement oxygen sensor for OXYBase WR probes
The PreSens cap is made of stainless steel with an integrated PSt3 sensor.
SKU: OEC-PSt3-NAU
Oxygen Probe for In-Line Measurement OIM-PSt3
PreSens OIM-PSt3 is designed for process control and provides accurate and stable O2 measurements in the 0-100% / 0-45 mg / L range, with a detection limit of 0.03% / 15 ppb.
SKU: OIM-PSt3
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
Needle micro oxygen sensor NFSG-PSt7
The NFSG-PSt7 Fixed Tip Micro Needle Oxygen Sensor has a measuring range from 0 to 100% oxygen with a detection limit of 0.03% oxygen. Designed for headspace measurement in packaging or other applications where small volume measurements of gaseous oxygen are required.
SKU: NFSG-PSt7
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Inline oxygen sensor Orbisphere K1100 series, 0 - 40 ppm, 28 mm fitting
The Orbisphere K1100-S00H is a high-precision, fluorescent dissolved oxygen sensor optimized for energy applications.
SKU: K1100-S00H
Dissolved oxygen sensor Intellical LBOD101 for BOD measurement
Luminescent / optical dissolved oxygen (LDO) sensor for BOD measurement, 1 m cable.
SKU: LBOD10101
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, 28 mm fitting
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
Recommended products
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 40 ppm
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00H
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
Replacement oxygen sensor for OXYBase WR probes
The PreSens cap is made of stainless steel with an integrated PSt3 sensor.
SKU: OEC-PSt3-NAU
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
Orbisphere GA2400 Series Oxygen Sensor, 100 Bar
Electrochemical industrial oxygen sensor. Used in conjunction with Orbisphere controllers.
SKU: GA2400-S0S
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Oxygen sensitive PET bottle cap OSC-PSt3
The oxygen sensitive PET bottle cap PreSens OSC-PSt3 is designed to measure oxygen penetration into opaque bottles in the range of 0 - 100% O2, 0 - 1000 hPa / 0 - 45 mg/L, 0 - 1400 μmol/L.
SKU: OSC-PSt3
