998 (90) 174-57-84
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
SKU: 2975149
Manufacturer: Hach
Availability: Order only
Electrode cleaning solution to remove mineral contamination / deposits from the sensing element.
- Rinse out any remaining acids and alkalis with tap water.
- Place the pH probe in the phosphoric acid cleaning solution for 5 minutes, then in the detergent solution for 10 minutes.
- Rinse thoroughly with deionized water and dry with a cloth.
Volume: 500 ml.
Formula: phosphoric acid (~ 10%)
Specifications Recommended products
Specifications
Specifications
| Type | Liquid reagents |
| Quantity | |
| Formula | Phosphoric Acid (~ 10%) |
Recommended products
ISE standard solution, Fluoride (F-) concentration 1 mg/l; volume 500 ml and 1 liter
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 29149, 29153
Compare
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
Buffer Powder Pillows, pH 4.01 colour-coded red
Color-coded powdered pH buffer for pH electrode calibration.
SKU: 2226995
HI77100P Calibration Solutions 1413 µS/cm and pH 7.01 in sachets
The HI77100P is a set of high quality 1413 µS/cm conductivity standards and pH 7.01 buffers in easy-to-use disposable sachets.
SKU: HI77100P
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
Ionic Strength Adjustor (ISA) Fluoride, 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 258999
NaCl solution for conductivity meter calibration 18000 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 2307442
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
51302070 Buffer pH 9.21 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302070
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
HI70030P Conductivity Standard 12880 µS/cm (25 x 20 ml sachets)
HI70030P is a premium solution with a conductivity of 12,880 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70030P
51350062 ORP buffer 220 mV/pH7, 6 x 250mL
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350062
Storage solution for pH electrodes, 500 ml
Solution for storing electrodes of pH meters - KCl, KH₂PO₄, Na₂HPO₄, glutaric dialdehyde.
SKU: 2756549
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
Recommended products
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
Ammonia Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ammonia Ionic Strength Adjustor (ISA) for Ammonia determinations by Ion Selective Electrode (ISE) method. Ideal for low Ammonia level readings. Pack of 100 powder pillows.
SKU: 4447169
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
Storage solution for pH electrodes, 500 ml
Solution for storing electrodes of pH meters - KCl, KH₂PO₄, Na₂HPO₄, glutaric dialdehyde.
SKU: 2756549
