998 (90) 174-57-84
51350072 Electrolyte KCl 3M, 250 ml bottle
SKU: 51350072
Manufacturer: Mettler Toledo
Availability: Order only
KCl 3M solution for filling electrodes (reference electrolyte). The volume of the bottle is 250 ml.
The electrolyte is needed to establish a stable reference potential, which is critical for accurate measurements. It prevents fouling, facilitates ion exchange, and contributes to the overall stability and performance of the electrode over time.
Specifications Recommended products
Specifications
Specifications
| Type | Filling solution |
Recommended products
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
Compare
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
51107891 Electrolyte for DX312-Cd electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX312-Cd ion selective electrode.
SKU: 51107891
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
HI7041S Electrolyte for Dissolved Oxygen Sensors
The HI7041S electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041S
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
51107893 Electrolyte for DX226-CN 20 ml
Electrolyte for ion-selective electrode determining Cyanide ions.
SKU: 51107893
51344752 PerfectION electrolyte С, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Silver concentrations.
SKU: 51344752
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX258-SCN Thiocyanate ion selective electrode and to ensure accurate measurements of the concentration of Thiocyanate ions in solutions.
SKU: 51107872
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
HI70030P Conductivity Standard 12880 µS/cm (25 x 20 ml sachets)
HI70030P is a premium solution with a conductivity of 12,880 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70030P
KCl calibration solution for conductivity meters 146.9 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974226, 2974249
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
HI70630L Acidic solution for cleaning pH electrodes from fats
HI70630L is an effective acidic cleaning solution specially designed for pH electrodes to be immersed in fat containing samples.
SKU: HI70630L
Recommended products
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
30090847 Standard solution conductivity 1.3 µs/cm
Mettler Toledo 30090847 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30090847
pH Buffer Powder Pillows, pH 7.00 (yellow) 50 pcs.
Powder pH buffer in individually sealed sachets. The color coding makes it easy to identify the pH value of the prepared solution.
SKU: 2227066
Powder Pillows sachets with buffer pH 10.01 (blue) 50 pcs.
Standard for calibrating pH electrodes.
SKU: 2227166
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
30111137 Buffer pH 6.865 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111137
