998 (90) 174-57-84
51350078 Electrolyte KNO3 1M; 250 ml
SKU: 51350078
Manufacturer: Mettler Toledo
Availability: Order only
Solution 51350078 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
Concentration 1 mol/l KNO3.
Volume 250 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Filling solution |
Recommended products
pH Buffer Solution, pH 7,00
pH Buffer Solution, concentration 7,00 ± 0,02 pH, 500 mL.
SKU: 2283549.99
Compare
Ammonium Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ionic Strength Adjustor (ISA) for Ammonium determinations by Ion Selective Electrode (ISE) method. Powder form prevent from diluting samples. Ideal for low Ammonium level readings. Eliminate most interferences. Pack of 100 powder pillows.
SKU: 2980699
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
KCl calibration solution for conductivity meter 12890 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974426, 2974449
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
Solution for cleaning pH electrodes from proteins / organic substances, 250 ml
The solution is intended for cleaning the sensitive element of the electrode from contaminants such as proteins and other organic contaminants.
SKU: C20C370
51350044 Certified buffer pH 7.00, 6 x 250 ml
Solution for pH electrodes calibration.
SKU: 51350044
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
ISE standard solution, Fluoride (F-) concentration 10 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 35949
108703 WTW TEP 10: Technical buffer solution, pH 10.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 10.01
SKU: 108703
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
Filling Solution, Reference, 3 M KCl, 50 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 3 M, 50 mL bottle.
SKU: 2756559
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
NaCl solution for conductivity meter calibration 18000 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 2307442
301111389 Buffer pH 10.012 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111139
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
Recommended products
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
Easy cleaning of the pH electrode after use in samples containing fats, greases and oils.
SKU: 2964449
51350062 ORP buffer 220 mV/pH7, 6 x 250mL
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350062
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
30111134 Buffer pH 2.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111134
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
