998 (90) 174-57-84
30090856 Calcium standard solution 10 mg/l Ca
SKU: 30090856
Manufacturer: Mettler Toledo
Availability: Order only
Pre-mixed solution 30090856 from Mettler Toledo with a well-known calcium concentration of 10 mg/l Ca, commonly used to calibrate and verify the accuracy of ion selective electrodes.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Calcium |
| Concentration | 10 mg/L Ca |
| Quantity |
Recommended products
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
Compare
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Standard solution, manganese, 100 mL
Standard solution, manganese, 100 mL. Concentration: 1000 mg/L as Mn (NIST). For accuracy checks in manganese determinations (HNO3 matrix).
SKU: 1279142
30090852 Standard solution 10 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090852
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
COD standard solution, 1000 mg/L O2 (NIST)
COD standard solution, concentration 1000 mg/L O2.
SKU: 2253929
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440042
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL
Standard solution, barium, 1000 mg/L as Ba (NIST), 100 mL.
SKU: 1461142
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
BOD Standard Solution, 3000 mg/L О2 (NIST)
BOD Standard Solution, concentration 3000 mg/L О2 (NIST).
SKU: 1486610
Nitrite standard solution, 250 mg/L NO2-N, APHA
Nitrite standard solution, concentration 250 mg/L NO2-N.
SKU: 2340249
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Iron standard solution, 100 mg/L Fe (NIST)
Iron standard solution, concentration 100 mg/L Fe.
SKU: 1417542
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL bottle.
SKU: 15349
Nitratax control standard, 100 mg/L NO3 (22.6 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW826
Reagent kit Amtax sc with standard, for range 10 - 1000 mg/L NH4-N
LCW866 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW866
51344774 Standard solution 1000 mg/l (copper)
The standard copper solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of copper ions (Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.
SKU: 51344774
Reagent kit Amtax sc with standard, for range 1 - 100 mg/L NH4-N
LCW871 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW871
Fluoride Standard Solution, 1 mg/L F
Standard Solution. Fluoride, 1.00 mg/L ±0.02 mg/L F- (NIST). 1 L bottle.
SKU: 29153
Sulphuric acid standard solution, 0,100 N
Sulfuric acid standard solution, 0,100 N, 1 L bottle.
SKU: 20253
Recommended products
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
Sulphuric acid standard solution, 0,100 N
Sulfuric acid standard solution, 0,100 N, 1 L bottle.
SKU: 20253
Addista Surfactants standard for LCK333 1g/L TRITON x 100
Addista Surfactants standard for LCK333, concentration 1g/L TRITON x 100.
SKU: LCA333
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
30090852 Standard solution 10 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090852
Standard solution, cobalt, 1000 mg/L as Co (NIST)
Standard solution, cobalt, 100 mL. Concentration: 1000 mg/L as Co (NIST).
SKU: 2150342
Chromium, trivalent, standard solution, 50 mg/L Cr3 + (NIST), 100 ml
Solution for checking the accuracy of the analysis when determining the concentration of total chromium.
SKU: 1415142
Reagent kit Amtax sc with standard, for range 1 - 100 mg/L NH4-N
LCW871 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW871
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
