998 (90) 174-57-84
51107890 Electrolyte for DX287-BF4 electrode
SKU: 51107890
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte (electrode filling solution) 51107890 Mettler Toledo, designed for the DX287-BF4 ion selective electrode, which is sensitive to Fluoroborate ions in solutions. Volume 20 ml.
The right electrolyte ensures long-term stability and maximum electrode performance.
Recommended products
Recommended products
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
Compare
1.09475 Buffer solution pH 4.00, red (20 °C)
The red buffer solution (composition: citric acid/sodium hydroxide/hydrogen chloride) is prepared gravimetrically using high-quality reagents in accordance with DIN EN ISO/IEC 17025.
SKU: 1094750500
pH Buffer Powder Pillows, pH 7.00 (yellow) 50 pcs.
Powder pH buffer in individually sealed sachets. The color coding makes it easy to identify the pH value of the prepared solution.
SKU: 2227066
51350106 TISAB 3 Ionic Strength Adjustor, 250 ml
Accurate ion determination requires the correct ionic strength adjustment solution (ISA). This solution is suitable for ISE electrodes for fluoride.
SKU: 51350106
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
Certified Buffer Standard Solution, pH 10,012
Certified Buffer Standard Solution, pH 10,012 ±0.010 pH at 25°C, 500 mL.
SKU: S11M007
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
51350060 ORP buffer 220 mV/pH7, 250 ml
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350060
Chloride Standard Solution, 1000 mg/L, 500 mL
ISE Standard Solution. Chloride, 1000 mg/L ±10 mg/L Cl- (NIST). 500 mL bottle.
SKU: 18349
Buffer solution pH 10.01, 125 ml
Calibration solution with pH 10.01 ± 0.02 at 25 ° C for ph electrodes.
SKU: LZW9470.99
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
Conductivity Standard Solution, 180 µS/cm, NaCl, 100 mL
Calibration solution 180 μS/cm ± 10 μS/cm at 25 °C.
SKU: 2307542
HI77100P Calibration Solutions 1413 µS/cm and pH 7.01 in sachets
The HI77100P is a set of high quality 1413 µS/cm conductivity standards and pH 7.01 buffers in easy-to-use disposable sachets.
SKU: HI77100P
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
Solution 12.88 mS/cm, KCl, 250 mL for conductivity meter calibration
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 250 ml.
SKU: LZW9720.99
Buffer Powder Pillows, pH 4.01 colour-coded red
Color-coded powdered pH buffer for pH electrode calibration.
SKU: 2226995
51107881 Electrolyte for DX207-Li 20 ml
Electrolyte for ion-selective electrode determining lithium ions.
SKU: 51107881
51350004 pH 4.01 Technical buffer solution
pH buffer with pH value 4.01 ± 0.02 for electrode calibration.
SKU: 51350004
Recommended products
HI700663P Cleaning Solution for Soil Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700663P
Powder Pillows buffer, pH 10.01 blue 250 pcs.
Standard for the calibration of electrodes. pH buffer in powder for dilution. The color coding is blue.
SKU: 2227164
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
