998 (90) 174-57-84
51107898 Electrolyte for DX327-I electrode
SKU: 51107898
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte (electrode filling solution) 51107898 Mettler Toledo, designed for the DX327-I ion selective electrode, which is sensitive to Iodide ions in solutions. Volume 20 ml.
The right electrolyte ensures long-term stability and maximum electrode performance.
Recommended products
Recommended products
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
Easy cleaning of the pH electrode after use in samples containing fats, greases and oils.
SKU: 2964449
Compare
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
51350004 pH 4.01 Technical buffer solution
pH buffer with pH value 4.01 ± 0.02 for electrode calibration.
SKU: 51350004
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
Powder Pillows sachets, buffer pH 7.00 (yellow) 250 pcs.
Powder pH buffer 7.00 (yellow) in individual, color-coded sealed sachets for easy identification.
SKU: 2227064
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX262-NO3 Nitrate ion selective electrode and to ensure accurate measurements of the concentration of Nitrate ions in solutions.
SKU: 51340034
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
Chloride Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Chloride Ionic Strength Adjustor (ISA) for Chloride determinations by Ion Selective Electrode (ISE) method. Ideal for low Chloride level readings. Pack of 100 powder pillows.
SKU: 2318069
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
Filling Solution, Reference, 3 M KCl with AgCl, 28 mL
Filling solution for electrode reference element, Potassium Chloride (KCl) with Saturated AgCl, 3 M, 28 mL bottle.
SKU: 2841700
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
HI70004P pH 4.01 buffer solution for calibration (25 x 20 ml)
HI70004P contains 25 sachets containing 20 ml buffer solution for calibrating pH meters and electrodes.
SKU: HI70004P
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
Recommended products
Conductivity calibration solution 100 μS/cm, NaCl, 50 ml
Standard conductivity solution for calibrating TDS meters (salinometers) and conductivity meters.
SKU: 2971826
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
51302049 Conductivity standard 1413 µS/cm, sachets 30x20ml
A solution with a standard conductivity value of 1413 µS/cm for calibrating conductivity sensors.
SKU: 51302049
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
