998 (90) 174-57-84
30090851 Standard solution 100 mg/l (fluoride)
SKU: 30090851
Manufacturer: Mettler Toledo
Availability: Order only
The Mettler Toledo Fluoride Standard Solution 30090851 for Ion Selective Electrodes (ISE) is a solution with an accurately known concentration of fluoride ions (100 mg/L F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
The volume of the bottle is 500 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Standard solutions - one-parameter analysis |
| Parameters | Fluoride |
| Concentration | 100 mg/L F |
Recommended products
Sulphuric acid standard solution, 0,035 N, 100 mL
Sulphuric acid standard solution, 0,035 N, 100 mL marked drpping bottle (MDB).
SKU: 2349732
Compare
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
Fluoride Standard Solution, 1 mg/L F
Standard Solution. Fluoride, 1.00 mg/L ±0.02 mg/L F- (NIST). 1 L bottle.
SKU: 29153
Nitratax control standard, 200 mg/L NO3 (45.2 mg/L NO3-N)
Standard solution for calibration / verification of the Nitratax sc process probe.
SKU: LCW827
Addista Mono standard for chlorine cuvette test LCK310
Addista Mono standard for chlorine cuvette test LCK310, concentration 25 - 30 mg/L Cl2.
SKU: LCA310
COD standard solution, 300 mg/L O2 (NIST)
COD standard solution, concentration 300 mg/L O2.
SKU: 1218649
Reagent kit Amtax sc with standard, for range 0.02 - 5 mg/L NH4-N
A set of reagents with standard solutions for calibration.
SKU: LCW889
Addista Mono standard for BOD cuvette test LCK555
Addista Mono standard for BOD cuvette test LCK555, concentration 200 mg/L O2.
SKU: LCA555
Phosphorus Standard Solution, 25 mg/L as P (NIST)
Phosphorus Standard Solution. For accuracy checks in phosphorus determinations. Concentration: 25 mg/L as P (NIST).
SKU: 2109210
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Standard Solution, Manganese, 10 mg/L Mn (NIST), PourRite Ampoules
Used to check the accuracy of the analysis when determining manganese in a water sample.
SKU: 2605820
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL
Ammonia Standard Solution, 10 mg/L NH3 -N, 500 mL bottle.
SKU: 15349
Sodium Hydroxide Standard Solution, 6 N
Sodium hydroxide standard solution, 6 N, 1 L bottle.
SKU: 2332453
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Chlorine standard solution, 50 - 75 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 50 - 75 mg/L Cl2.
SKU: 1426810
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL
Ammonia Standard Solution, 100 mg/L NH3-N, 500 mL bottle.
SKU: 2406549
Standard solution, manganese, 100 mL
Standard solution, manganese, 100 mL. Concentration: 1000 mg/L as Mn (NIST). For accuracy checks in manganese determinations (HNO3 matrix).
SKU: 1279142
Sodium chloride standard solution, 1000 µS/cm (NIST)
Sodium chloride standard solution, concentration 1000 µS/cm.
SKU: 1440049
Sulphuric acid standard solution, 0,100 N
Sulfuric acid standard solution, 0,100 N, 1 L bottle.
SKU: 20253
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Standard Solution, nickel, 100 mL
Standard Solution, nickel, 100 mL. Concentration: 1000 mg/L as Ni (NIST). For accuracy checks in nickel determinations. (HNO3 matrix).
SKU: 1417642
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Quality control standard hardness, low range, 500 mL
Quality control standard hardness, low range, 500 mL.
SKU: 2833449
Sulphuric acid standard solution, 5,25 N
Sulfuric acid standard solution, 5,25 N, 100 mL bottle.
SKU: 244932
Recommended products
Iron standard solution, 100 mg/L Fe (NIST)
Iron standard solution, concentration 100 mg/L Fe.
SKU: 1417542
SKU: 227142
Reagent kit Amtax sc with standard, for range 1 - 100 mg/L NH4-N
LCW871 Reagent Kit for Oline Ammonium Analyzer with Standard Calibration Solutions.
SKU: LCW871
Chlorine standard solution, 25 - 30 mg/L Cl2 (NIST)
Chlorine standard solution, concentration 25 - 30 mg/L Cl2.
SKU: 2630020
Silica standard solution, 1 mg/L SiO2 (NIST)
Silica standard solution, concentration 1 mg/L SiO2.
SKU: 110649
Sulphuric acid standard solution, 0,035 N, 100 mL
Sulphuric acid standard solution, 0,035 N, 100 mL marked drpping bottle (MDB).
SKU: 2349732
Addista Surfactants standard for LCK333 1g/L TRITON x 100
Addista Surfactants standard for LCK333, concentration 1g/L TRITON x 100.
SKU: LCA333
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
