998 (90) 174-57-84
30095315 All-in-One Kit 2 6x250 ml
SKU: 30095315
Manufacturer: Mettler Toledo
Availability: Order only
Mettler Toledo All-in-One Kit 2 contains 6 x 250 ml bottles with the following components:
- technical buffers pH 4.01 / pH 7.00 / pH 10.00
- electrolyte KCl 3 mol/l
- cleaning solution (pepsin)
- InLab storage solution
The kit is ideal for maintenance and calibration of pH electrodes.
Recommended products
Recommended products
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
Compare
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
Calibration solution ph 7.00, 250 mL
Buffer solution for calibration and accuracy check of pH electrodes and hydrogen ion meters, pH is 7.00 ± 0.02 pH at 25 °C
SKU: LZW9464.98
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
HI700640P Cleaning Solution for Milk Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700640P
HI6016 Calibration solution pH 1.679 ± 0.002 at 25°C
HI6016 is a pH 1.679 +/- 0.002 pH calibration buffer.
SKU: HI6016
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Conductivity Standard Solution, 180 µS/cm, NaCl, 100 mL
Calibration solution 180 μS/cm ± 10 μS/cm at 25 °C.
SKU: 2307542
HI6004 Calibration solution pH 4.010 ± 0.002 at 25°C
HI6004 is a pH 4.010 +/- 0.002 pH calibration buffer.
SKU: HI6004
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
51107893 Electrolyte for DX226-CN 20 ml
Electrolyte for ion-selective electrode determining Cyanide ions.
SKU: 51107893
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
Recommended products
51340029 Electrolyte for DX280-Br electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX280-Br ion selective electrode.
SKU: 51340029
HI70031P Conductivity Standard 1413 µS/cm (25 x 20 ml sachets)
HI70031P is a premium solution with a conductivity of 1413 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70031P
Calibration solution for conductivity meter 1413 µS/cm, KCl, 250 mL
Standard conductivity solution 1413 μS/cm for calibrating meter, sensor and verifying analytical accuracy.
SKU: LZW9710.99
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
HI77100P Calibration Solutions 1413 µS/cm and pH 7.01 in sachets
The HI77100P is a set of high quality 1413 µS/cm conductivity standards and pH 7.01 buffers in easy-to-use disposable sachets.
SKU: HI77100P
