998 (90) 174-57-84
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
SKU: 51350108
Manufacturer: Mettler Toledo
Availability: Order only
This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions. The bottle contains 250 ml.
The use of an ionic strength regulator helps to minimize the influence of factors affecting the activity of ions in solution and improves the accuracy of results obtained using ion-selective electrodes.
Recommended products
Recommended products
Powder Pillows sachets with buffer pH 10.01 (blue) 50 pcs.
Standard for calibrating pH electrodes.
SKU: 2227166
Compare
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
51350002 Technical Buffer pH 2.00
Calibration solution for pH electrodes with pH value 2.00 ± 0.02
SKU: 51350002
HI6007 Calibration solution pH 7.010 ± 0.002 at 25°C
HI6007 is a pH 7.010 +/- 0.002 pH calibration buffer.
SKU: HI6007
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
51350016 Buffer pH 2.00, 6 x 250 ml
Technical buffer solution pH 2.00 ± 0.02. The package contains 6 bottles of 250 ml.
SKU: 51350016
HI7041M Electrolyte for Dissolved Oxygen Sensors
The HI7041M electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041M
HI6004 Calibration solution pH 4.010 ± 0.002 at 25°C
HI6004 is a pH 4.010 +/- 0.002 pH calibration buffer.
SKU: HI6004
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX258-SCN Thiocyanate ion selective electrode and to ensure accurate measurements of the concentration of Thiocyanate ions in solutions.
SKU: 51107872
30111137 Buffer pH 6.865 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111137
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
51340035 Electrolyte for DX218-NH4, 20 ml
Solution for filling the DX218-NH4 electrode.
SKU: 51340035
51344751 PerfectION electrolyte B, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Cyanide, Chloride, Silver/Sulfide, Lead concentrations.
SKU: 51344751
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
51302047 Buffer pH 7.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302047
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
HI700601P Electrode Cleaning Solution (25 sachets x 20 ml)
Cleaning solution for general purpose pH electrodes.
SKU: HI700601P
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
Certified Buffer Standard Solution, pH 12,45
Certified Buffer Standard Solution, pH 12,45 ±0,05 pH at 25°C, 500 mL.
SKU: S11M008
Recommended products
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
HI7041S Electrolyte for Dissolved Oxygen Sensors
The HI7041S electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041S
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
51107872 Electrolyte for DX258-SCN ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX258-SCN Thiocyanate ion selective electrode and to ensure accurate measurements of the concentration of Thiocyanate ions in solutions.
SKU: 51107872
