998 (90) 174-57-84
HI7041S Electrolyte for Dissolved Oxygen Sensors
SKU: HI7041S
Manufacturer: Hanna Instruments
Availability: Order only
The HI7041S electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct refilling solution has a significant impact on the performance of your Dissolved Oxygen Sensor.
- Convenient dropper bottle, volume 30 ml
- KCl solution is made from chemically pure substances
Recommended products
Recommended products
51350078 Electrolyte KNO3 1M; 250 ml
Solution 51350078 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350078
Compare
KCl calibration solution for conductivity meters 1412 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974326, 2974349
Ammonia Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ammonia Ionic Strength Adjustor (ISA) for Ammonia determinations by Ion Selective Electrode (ISE) method. Ideal for low Ammonia level readings. Pack of 100 powder pillows.
SKU: 4447169
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
30111134 Buffer pH 2.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111134
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
51350046 Buffer pH 9.21, 6 x 250 ml
Solution with a standard pH value of 9.21±0.02
SKU: 51350046
51344774 Standard solution 1000 mg/l (copper)
The standard copper solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of copper ions (Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.
SKU: 51344774
Chloride Standard Solution, 100 mg/L, 1 L
ISE Standard Solution. Chloride, 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-. 1 L bottle.
SKU: 2370853
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
51350098 Conductivity standard 12.88 mS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350098
51343180 Electrolyte KCl 3M 25 ml
Electrolyte for filling the ph electrode.
SKU: 51343180
Singlet Single-use Conductivity Standard Solution, 1413 µS/cm
Singlet standard solutions for calibration of conductometers in individual sealed bags, without color coding. Packaging: 20 sachets, 20 mL each.
SKU: 2771420
ISE standard solution, nitrate (NO3-N) concentration 1000 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1279249
Buffer Powder Pillows, pH 4.01 colour-coded red
Color-coded powdered pH buffer for pH electrode calibration.
SKU: 2226995
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Recommended products
51350080 Electrolyte 3 mol/l KCl, 6 x 250 ml
A 3 mol/L potassium chloride (KCl) solution is commonly used as a filling solution for reference electrodes in various electrochemical measurements. The solution is important for maintaining the stable reference potential required for accurate measurements.
SKU: 51350080
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
HI70030P Conductivity Standard 12880 µS/cm (25 x 20 ml sachets)
HI70030P is a premium solution with a conductivity of 12,880 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70030P
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
pH Buffer Solution, pH 4.01
pH Buffer Solution, concentration 4.01 ± 0.02 pH, 500 mL.
SKU: 2283449.99
HI7031L KCl solution with a standard conductivity of 1413 µS/cm
The HI7031L is a premium conductivity standard with a conductivity value of 1413 µS/cm, based on a NIST traceable potassium chloride solution.
SKU: HI7031L
ORP buffer solution for calibration, 600 mV
Reference solution for calibration of ORP electrodes (sealed plastic bottle).
SKU: 25M2A1002-115
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
51340030 Electrolyte for DX235-Cl electrode, 20 ml
Electrolyte to ensure stable operation of the DX235-Cl chloride ion selective electrode and to ensure accurate measurements of the concentration of chloride ions in solutions.
SKU: 51340030
