Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
SKU: 114.000
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
SKU: HD-200FL
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10H
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
Fast response oxygen sensor for PreSens OXYPro WR and WRM probes.
SKU: OEC-PSt7-NAU-OIW
SKU: HD-480
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: HD-960L
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO
Sorting:
SKU: 114.000
Laboratory dissolved oxygen sensor LDO101, cable 1 m, 3 m
Intellical LDO101 - a digital luminescent / optical sensor of dissolved oxygen (LDO technology).
SKU: LDO10101, LDO10103
Field dissolved oxygen sensor LDO101, cable 5, 10, 15, 30 m
Intellical LDO101 is a digital luminescent / optical dissolved oxygen sensor (LDO technology). Luminescence based LDO technology - no electrolyte change required, no interference due to deposits or hydrogen sulfide.
SKU: LDO10105, LDO10110
Orbisphere K1200 Oxygen Sensor for nuclear applications, 0 - 2000 ppb
Maintenance-free optical sensor for analysis and monitoring of dissolved oxygen in nuclear power plants.
SKU: K1200-S00
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
SKU: HD-200FL
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10H
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
Fast response oxygen sensor for PreSens OXYPro WR and WRM probes.
SKU: OEC-PSt7-NAU-OIW
SKU: HD-480
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: HD-960L
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Optical point SP-PSt7-NAU for oxygen sensor PreSens
Optical points SP-PSt7-NAU and SP-PSt7-YAU for PreSens oxygen sensors allow O2 measurements from 0 to 100% with a detection limit of 0.03%. SP-PSt7-NAU - not autoclavable. SP-PSt7-YAU - autoclavable.
SKU: SP-PSt7-NAU, SP-PSt7-YAU
LDO sc process dissolved oxygen sensor; cable 10 meters
LDO Process Dissolved Oxygen Sensor for SC Series Online Controllers. Available with 10 meter cable.
SKU: LXV416.99.20001
Optical point SP-PSt8-NAU for oxygen sensor PreSens
Optical points SP-PSt8-NAU and SP-PSt8-YAU for PreSens oxygen sensors allow O2 measurement in the range from 0 to 10%, detection limit - 0.007%. SP-PSt8-NAU - not autoclavable. SP-PSt8-YAU - autoclavable.
SKU: SP-PSt8-NAU, SP-PSt8-YAU
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Optical point SP-PSt3-NAU for oxygen sensor PreSens
The optical point is the most versatile version of the non-invasive optical oxygen sensors. SP-PSt3-NAU has a measuring range from 0 to 100% oxygen in dissolved or gas phase
SKU: SP-PSt3-NAU
Optical point SP-PSt6-YAU for oxygen sensor PreSens
The optical point is the most versatile version of optical oxygen sensors. Dissolved and gaseous oxygen is measured in a non-contact way through the transparent wall of the container. SP-PSt6-YAU has a measuring range of 0 to 5% oxygen in dissolved or gas phase.
SKU: SP-PSt6-YAU
OXY-2GO Portable O2 Analyzer for Beer by Haffmans Pentair
The Pentair Haffmans Oxy-2Go is a portable analyzer designed specifically for small breweries that require an economical and reliable solution for monitoring dissolved oxygen (DO). It provides accurate measurement of the full range of oxygen in wort, beer and other carbonated beverages using proven Pentair Haffmans optical technology.
SKU: OXY-2GO