998 (90) 174-57-84
51300140 Tablets for preparing solutions with zero dissolved oxygen content
SKU: 51300140
Manufacturer: Mettler Toledo
Availability: Order only
Tablets 51300140 (20 pcs.) are used for the preparation of solutions and subsequent calibration and maintenance of dissolved oxygen (DO) sensors or probes in a variety of industrial, field and laboratory conditions. The finished solution provides accurate and reliable measurements of dissolved oxygen in aqueous solutions.
The tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
Each package includes 2 blisters of 10 tablets.
Specifications Recommended products
Specifications
Specifications
| Parameters | Dissolved oxygen |
Recommended products
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
Compare
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
51344774 Standard solution 1000 mg/l (copper)
The standard copper solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of copper ions (Cu). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of copper ions in the sample.
SKU: 51344774
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
Electrode cleaning solution, 500 mL
Solution for regular maintenance of Hach Lange pH electrodes.
SKU: 2965249
HI700670P Cleaning Solution for Salt Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700670P
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX262-NO3 Nitrate ion selective electrode and to ensure accurate measurements of the concentration of Nitrate ions in solutions.
SKU: 51340034
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
51302153 Standard solution conductivity 84 µs/cm
Mettler Toledo 51302153 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51302153
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
HI6031 Conductivity standard 84 µS/cm (500 ml)
HI6033 is a high quality 84 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6033
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
Electrolyte solution for ozone sensor 9185 sc
Volume 100 ml.
SKU: Z09185=A=3600
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
Singlet Single-Use pH Buffer Kit, pH 4,01 & 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 4,01 & 7,00, 20 mL each.
SKU: 2769920
Recommended products
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
51350094 Conductivity standard 12.88 mS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350094
30090860 Ammonium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090860
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
RENOVO.N solution for cleaning pH electrodes, pure water samples, 250 ml
Solution for regular cleaning of the sensitive element of a pH electrode.
SKU: S16M001
ISE standard solution, nitrate (NO3-N) concentration 1 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 204649
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
51344763 PerfectION nitrate ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of nitrate.
SKU: 51344763
