Probes and sensors
This section of the catalog presents a wide selection of Hach Lange Intellical probes and electrodes for the most demanding laboratory and field tasks in the following parameters: pH, dissolved oxygen, BOD, conductivity, TDS, ORP, ammonia, ammonium, chloride, fluoride, nitrate and sodium. All Intellical probes are automatically recognized by the HQ / HQD series meters and retain their calibration data, eliminating the need to recalibrate when switching between meters. The Red Rod pH electrodes provide exceptional performance and response times for a wide variety of sample types in the laboratory. The rugged outdoor sensors are housed in a stainless steel housing and, thanks to digital technology, can be used with cables up to 30 meters. In addition to sensors and electrodes, this section contains solutions for sensor maintenance, conductivity standards and pH buffers.
Sorting:
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
SKU: 92222102
Inline oxygen sensor Orbisphere K1100 series, 0 - 2000 ppb, 28 mm fitting
The Orbisphere K1100 is a high-precision, fluorescent dissolved oxygen sensor optimized for energy applications.
SKU: K1100-S00
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
SKU: U-50
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
SKU: HD-200FL
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10H
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
Fast response oxygen sensor for PreSens OXYPro WR and WRM probes.
SKU: OEC-PSt7-NAU-OIW
SKU: HD-480
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: HD-960L
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW
Sorting:
Replacement cap OEC30-PSt3-NAU for OXYBase WR oxygen probe
Replaceable oxygen sensor for fast response times and reduced air bubbles for OXYBase WR probes.
SKU: OEC30-PSt3-NAU-OIW
SKU: 92222102
Inline oxygen sensor Orbisphere K1100 series, 0 - 2000 ppb, 28 mm fitting
The Orbisphere K1100 is a high-precision, fluorescent dissolved oxygen sensor optimized for energy applications.
SKU: K1100-S00
OXYBase WR-RS485 and WR-RS485M sensors for measuring gaseous and dissolved oxygen
OXYBase® WR-RS485 and WR-RS485M combine an optical sensor of the PSt3 type and an electro-optical module in one probe. The maximum measuring range is 0 - 100% O2 and the detection limit is 0.03% O2.
SKU: WR-RS485, WR-RS485M
SKU: U-50
Orbisphere M1100 inline oxygen sensor, 0 - 2 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10
OEC-PSt7-YAU replacement oxygen sensor for WR and WRM probes of OXYPro series
Spare cap with OEC-PSt7-YAU oxygen sensor.
SKU: OEC-PSt7-YAU
SKU: HD-200FL
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 12 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S10H
Replacement cap with oxygen sensor OEC-PSt7-NAU for OXYPro WR and WRM probes
Fast response oxygen sensor for PreSens OXYPro WR and WRM probes.
SKU: OEC-PSt7-NAU-OIW
SKU: HD-480
Orbisphere M1100 inline oxygen sensor, 0 - 40 ppm, fitting 28 mm
Used in conjunction with Orbisphere controllers.
SKU: M1100-S00H
Replacement cap OEC30-PSt7-YAU with oxygen sensor for OXYPro WR and WRM probes
Thanks to the design of the cap, this model of the sensor reduces the formation of air bubbles during the measurement of dissolved oxygen.
SKU: OEC30-PSt7-YAU
SKU: HD-960L
LDO 2 sc dissolved oxygen process sensor for seawater, cable 10 m
Hach LDO® Model 2 Probe with Luminescent Dissolved Oxygen Technology for seawater.
SKU: LXV416.99.20S01
Oxygen sensors WR, WRM and WR-ECS OXYPro series
Probe for measuring dissolved and gaseous oxygen.
SKU: WR, WRM, WR-ECS
Self-adhesive optical point SP-PSt3-SA for oxygen sensor PreSens
Optical point SP-PSt3-SA for non-invasive online monitoring of oxygen in the dissolved or gaseous phase in the range of 0 - 100%, 0 - 45 mg/l.
SKU: SP-PSt3-SA
Replacement cap OEC30-PSt7-NAU-OIW with oxygen sensor for OXYPro WR and WRM probes
The wide range PSt7 sensor is built into a beveled stainless steel cap. The design reduces the formation of air bubbles on the sensor with a very fast response time (< 3 sec.).
SKU: OEC30-PSt7-NAU-OIW

