998 (90) 174-57-84
51350060 ORP buffer 220 mV/pH7, 250 ml
SKU: 51350060
Manufacturer: Mettler Toledo
Availability: Order only
ORP buffer is a standard solution used to check the accuracy of ORP electrodes (RedOX) and to calibrate them.
The volume of the bottle is 250 ml.
Specifications Recommended products
Specifications
Specifications
| Parameters | ORP (redox potential) |
| Measurement Range | 220 mV |
| Quantity |
Recommended products
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Compare
Storage solution for pH electrodes, 500 ml
Solution for storing electrodes of pH meters - KCl, KH₂PO₄, Na₂HPO₄, glutaric dialdehyde.
SKU: 2756549
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
108703 WTW TEP 10: Technical buffer solution, pH 10.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 10.01
SKU: 108703
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
51344753 PerfectION electrolyte D, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining iodide and copper concentrations.
SKU: 51344753
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
30111135 Buffer pH 11.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111135
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
30090859 Ammonium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of ammonium (NH4) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090859
51343182 Electrolyte KNO3 1M; 25 ml
Solution 51343182 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51343182
108700 WTW TEP 4: Technical buffer solution, pH 4.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 4.01
SKU: 108700
ISE standard solution, nitrate (NO3-N) concentration 100 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 194749
HI6031 Conductivity standard 1413 µS/cm (500 ml)
HI6031 is a high quality 1413 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6031
51350104 Electrode regeneration solution
Solution for the restoration of glass pH electrodes.
SKU: 51350104
HI7082 electrolyte for pH and ORP electrodes 3.5M KCl (4 x 30 ml)
KCl solution 3.5 M for filling pH and ORP electrodes with a double salt bridge.
SKU: HI7082
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
Recommended products
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
51344750 PerfectION electrolyte A, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining calcium, fluoride or sulfide concentrations.
SKU: 51344750
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
