998 (90) 174-57-84
51350102 pH electrode cleaning solution (thiourea)
SKU: 51350102
Manufacturer: Mettler Toledo
Availability: Order only
Solution 51350102 gently removes silver sulfide contaminants from pH electrodes. Mettler Toledo Thyurea Cleaning Solution helps maintain electrode performance and should be used after measurements and before recalibration.
The volume of the bottle is 250 ml.
Recommended products
Recommended products
HI6004 Calibration solution pH 4.010 ± 0.002 at 25°C
HI6004 is a pH 4.010 +/- 0.002 pH calibration buffer.
SKU: HI6004
Compare
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
HI70039P Conductivity Standard 5000 µS/cm (25 x 20 ml sachets)
HI70039P is a premium solution with a conductivity of 5000 µS/cm that complies with NIST standards and comes in convenient disposable sachets.
SKU: HI70039P
HI6031 Conductivity standard 84 µS/cm (500 ml)
HI6033 is a high quality 84 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6033
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
51340031 Electrolyte for DX219-F 20 ml
Electrolyte for ion-selective electrode determining Fluoride ions.
SKU: 51340031
51340034 Electrolyte for DX262-NO3 ISE electrode, 20 ml
Electrolyte to ensure stable operation of the DX262-NO3 Nitrate ion selective electrode and to ensure accurate measurements of the concentration of Nitrate ions in solutions.
SKU: 51340034
51350042 Certified Buffer pH 4.01 6 x 250 ml
pH buffer for electrode calibration. The package contains 6 bottles of 250 ml.
SKU: 51350042
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
30090851 Standard solution 100 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 30090851
Buffer Powder Pillows, pH 4.01 colour-coded red
Color-coded powdered pH buffer for pH electrode calibration.
SKU: 2226995
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
51350034 Buffer pH 7.00, 250 ml
Certified pH buffer solution for electrode calibration.
SKU: 51350034
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
HI700601P Electrode Cleaning Solution (25 sachets x 20 ml)
Cleaning solution for general purpose pH electrodes.
SKU: HI700601P
30111137 Buffer pH 6.865 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111137
Filling Solution, ISENa381, 0,02 M NH4Cl, 59 mL
Filling solution for Sodium Ion Selective Electrode (ISENa381), Ammonium Chloride (NH4Cl), 0,02 M, 59 mL bottle.
SKU: 2965126
Calibration solution for conductivity meter 1413 µS/cm, KCl, 125 mL
1413 μS/cm conductivity reference solution for calibrating the conductivity meter / cell and verifying the accuracy of the analysis performed.
SKU: LZW9711.99
51350010 Buffer pH 10.00, 250 ml
Technical buffer solution for calibration of ph meters and electrodes.
SKU: 51350010
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
Recommended products
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
Certified Buffer Standard Solution, pH 1.679
Certified Buffer Standard Solution,1.679 ±0.010 pH at 25°C.
SKU: S11M001
51344771 Calcium standard solution 1000 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 51344771
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
Solution for cleaning pH electrodes from minerals / inorganic samples, 500 ml
Using cleaning solutions will provide faster measurements, improve pH accuracy, and extend the life of the pH meter electrode.
SKU: 2975149
51107889 Electrolyte for DX264-Cu electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX264-Cu ion selective electrode.
SKU: 51107889
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
51343180 Electrolyte KCl 3M 25 ml
Electrolyte for filling the ph electrode.
SKU: 51343180
