998 (90) 174-57-84
51344750 PerfectION electrolyte A, 5x60 ml
SKU: 51344750
Manufacturer: Mettler Toledo
Availability: Order only
Solution for filling perfectION Mettler Toledo ion-selective electrodes designed to determine the concentration of calcium, fluoride or sulfide ions (Ca2+, F-, S2-)
By filling the electrode with the correct and fresh electrolyte, an accurate measurement of the ions is ensured. Maintain the electrolyte level by topping up regularly. When immersing the sensor in the analyzed solution, make sure that the electrolyte level is always higher than the sample level.
Recommended products
Recommended products
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026
Compare
51350104 Electrode regeneration solution
Solution for the restoration of glass pH electrodes.
SKU: 51350104
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
51340294 Electrolyte InLab 605, 25 ml bottle
Electrolyte for reference electrodes.
SKU: 51340294
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Buffer solution pH 7.00 25 mL
Colorless pH meter calibration solution.
SKU: 1222220
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
51340035 Electrolyte for DX218-NH4, 20 ml
Solution for filling the DX218-NH4 electrode.
SKU: 51340035
Conductivity calibration solution 10000 μS/cm, NaCl, 50 ml
Standard solution for calibrating TDS meters and conductivity meters.
SKU: 2972226
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
Buffer Solution, pH 10,01
Buffer Solution, concentration pH 10,01 ± 0,02, 500 mL.
SKU: 1222149
Solution for cleaning ph electrodes from fats, oils and greases, 500 ml
Easy cleaning of the pH electrode after use in samples containing fats, greases and oils.
SKU: 2964449
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
Singlet Single-use Conductivity Standard Solution, 147 µS/cm
Conductivity Standard Solution. Concentration 147 µS/cm at 25°C ±10% at 25°C. Pack of 20, 20 mL each.
SKU: 2771320
Conductivity standard solution, 1000 μS/cm, NaCl, 50 ml
NaCl (sodium chloride) standard solution for calibrating conductivity meters and sensors.
SKU: 1440026
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
Electrolyte solution for ozone sensor 9185 sc
Volume 100 ml.
SKU: Z09185=A=3600
51350072 Electrolyte KCl 3M, 250 ml bottle
Electrolyte for filling electrodes.
SKU: 51350072
Recommended products
Powder Pillows sachets, buffer pH 7.00 (yellow) 250 pcs.
Powder pH buffer 7.00 (yellow) in individual, color-coded sealed sachets for easy identification.
SKU: 2227064
51344755 PerfectION electrolyte F, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining nitrate concentrations.
SKU: 51344755
51302050 Conductivity standard 12.88 mS/cm, sachets 30x20ml
A solution with a standard conductivity value of 12.88 mS/cm for calibrating conductivity sensors.
SKU: 51302050
51340030 Electrolyte for DX235-Cl electrode, 20 ml
Electrolyte to ensure stable operation of the DX235-Cl chloride ion selective electrode and to ensure accurate measurements of the concentration of chloride ions in solutions.
SKU: 51340030
pH Buffer Solution, pH 7,00
pH Buffer Solution, concentration 7,00 ± 0,02 pH, 500 mL.
SKU: 2283549.99
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Calibration solution for conductivity meter 147 μS/cm, KCl, 125 mL
Solution for calibrating the conductivity meter and checking the accuracy of the analysis.
SKU: LZW9701.99
