998 (90) 174-57-84
51344754 PerfectION electrolyte E, 5x60 ml
SKU: 51344754
Manufacturer: Mettler Toledo
Availability: Order only
Solution for filling perfectION Mettler Toledo ion-selective electrodes designed to determine the concentration of potassium ions.
By filling the electrode with the correct and fresh electrolyte, an accurate measurement of the ions is ensured. Maintain the electrolyte level by topping up regularly. When immersing the sensor in the analyzed solution, make sure that the electrolyte level is always higher than the sample level.
Recommended products
Recommended products
51302069 Buffer pH 4.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302069
Compare
51350032 pH 4.01 certified buffer solution, 250 ml
Color coded calibration solution for pH electrodes. Bottle 250 ml.
SKU: 51350032
HI7010L buffer pH 10.01, volume 500 ml
A pH 10.01 buffer solution is commonly used to calibrate equipment used to analyze samples of water and other liquids.
SKU: HI7010L
51350020 Calibration solution pH 7.00, 6 x 250 ml
Buffer solution with a pH value of 7.00 ± 0.02 for calibrating pH meters and electrodes.
SKU: 51350020
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
Powder Pillows buffer, pH 10.01 blue 250 pcs.
Standard for the calibration of electrodes. pH buffer in powder for dilution. The color coding is blue.
SKU: 2227164
ISE standard sodium solution (Na +) concentration 1000 mg/l; volume 500 ml
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 1474949
Calibration solutions for TDS meters 1000 ppm
A solution of Na2SO4, Na2CO3, NaCl for checking the accuracy of instruments when measuring conductivity and total dissolved solids (salt content) of water.
SKU: 2974726, 2974749
HI7077L Electrode Oil and Grease Cleaner Solution (500 ml)
Specially formulated cleaning solution for removing oils and fats from the pH electrode.
SKU: HI7077L
51302080 Rainbow II pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302080
Singlet Single-Use pH Buffer Kit, pH 7,00 & 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is ±0.02 at 25°C. Pack of 20 of pH 7.00 and 10 of pH 10.01, 20 mL each.
SKU: 2769820
51344753 PerfectION electrolyte D, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining iodide and copper concentrations.
SKU: 51344753
1.09475 Buffer solution pH 4.00, red (20 °C)
The red buffer solution (composition: citric acid/sodium hydroxide/hydrogen chloride) is prepared gravimetrically using high-quality reagents in accordance with DIN EN ISO/IEC 17025.
SKU: 1094750500
51350108 Ionic Strength Adjustor 0.9 mol/L Al2(SO4)3, 250 ml
Accurate ion determination requires the correct solution (ISA) to adjust ionic strength. This solution is used in determining the concentration of nitrate, fluoroborate, lithium, ammonium and potassium ions.
SKU: 51350108
30095313 Rainbow Kit 2 pH Buffer Set, 6 x 250 ml
Set of pH calibration solutions. The package contains pH 4.01/7.00/10.00 buffers, 2 bottles each.
SKU: 30095313
Singlet Single-use Conductivity Standard Solution, 12,88 mS/cm
Solution with standard conductivity in individual sealed sachets, no color coding. Potassium chloride (KCl).
SKU: 2771520
51350004 pH 4.01 Technical buffer solution
pH buffer with pH value 4.01 ± 0.02 for electrode calibration.
SKU: 51350004
Certified Buffer Standard Solution, pH 7,413
Certified Buffer Standard Solution, pH 7,413 ±0.010 pH at 25°C, 500 mL.
SKU: S11M005
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
51344776 Standard solution for ISE 1000 mg/l I⁻
The iodide standard solution for ion selective electrodes provides accurate reference points for reliable measurements of iodide ion concentrations in samples.
SKU: 51344776
108703 WTW TEP 10: Technical buffer solution, pH 10.01 (1 liter)
Buffer solution for pH meters calibration. Ph value is 10.01
SKU: 108703
51344772 Standard solution 1000 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 51344772
Recommended products
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
ISE standard solution, Fluoride (F-) concentration 100 mg/l; volume 500 ml
Standard Fluoride Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 23249
51344775 Standard solution 1000 mg/l (fluoride)
The standard fluoride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of fluoride ions (F). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of fluoride ions in the sample.
SKU: 51344775
51107875 Electrolyte for DX407-Pb electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX407-Pb ion selective electrode.
SKU: 51107875
51350018 Technical buffer pH 4.01, 6 x 250 ml
pH buffer with a value of 4.01 for calibrating ph electrodes and ph meters.
SKU: 51350018
pH buffer 7.00 (yellow) Powder Pillows 15 pcs.
Powdered pH buffer; 15 individual sealed bags with buffer for pH calibration of electrodes.
SKU: 2227095
51344752 PerfectION electrolyte С, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining Silver concentrations.
SKU: 51344752
Singlet Single-Use pH Buffer, pH 7,00
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 7,00 ±0.02 at 25°C. Pack of 20 of pH 7,00, 20 mL each.
SKU: 2770120
