998 (90) 174-57-84
51344753 PerfectION electrolyte D, 5x60 ml
SKU: 51344753
Manufacturer: Mettler Toledo
Availability: Order only
Solution for filling perfectION Mettler Toledo ion-selective electrodes designed to determine the concentration of iodide and copper ions.
By filling the electrode with the correct and fresh electrolyte, an accurate measurement of the ions is ensured. Maintain the electrolyte level by topping up regularly. When immersing the sensor in the analyzed solution, make sure that the electrolyte level is always higher than the sample level.
Recommended products
Recommended products
HI70007P pH 7.01 Calibration Solution, 25 x 20 ml sachets
Buffer solution with a pH value of 7.01 for calibrating pH meters and electrodes. The package contains 25 sachets with 20 ml of solution.
SKU: HI70007P
Compare
51350024 Technical buffer pH 10.00, 6 x 250 ml
Buffer solution with a pH value of 10.00 for calibrating pH meters and electrodes.
SKU: 51350024
51350098 Conductivity standard 12.88 mS/cm, 6 x 250 ml
Solution for calibration and verification of the accuracy of conductometers and conductivity sensors.
SKU: 51350098
HI770710P pH 7.01 and 10.01 Buffer Sachets (Kit)
Set of calibration buffer solutions pH 7.01 and 10.01 +/- 0.01 pH at 25°C.
SKU: HI770710P
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
Certified Conductivity Standard Solution, 12,85 mS/cm
Calibration solution for conductometers with standard conductivity, concentration 12.85 mS / cm ± 0.5% (k = 2) at 25 ° C, 500 ml.
SKU: S51M002
51350086 Electrolyte KNO3 1M; 6 x 250 ml
Solution 51350086 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
SKU: 51350086
Singlet Single-use Conductivity Standard Solution, 1413 µS/cm
Singlet standard solutions for calibration of conductometers in individual sealed bags, without color coding. Packaging: 20 sachets, 20 mL each.
SKU: 2771420
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
30111142 InLab Electrode Storage Solution
Solution for storage of electrodes.
SKU: 30111142
Powder Pillows sachets with buffer pH 10.01 (blue) 50 pcs.
Standard for calibrating pH electrodes.
SKU: 2227166
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
51343185 FRISCOLYT B electrolyte, 25 ml
Electrolyte for filling electrodes.
SKU: 51343185
30111138 Buffer pH 9.180 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111138
51350076 FRISCOLYT B electrolyte, 250 ml
Electrolyte for filling electrodes.
SKU: 51350076
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
51350074 Electrolyte 3 mol/l KCl saturated AgCl, 250 ml
Solution for filling electrodes Mettler Toledo.
SKU: 51350074
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
51302079 Buffer pH 10.01 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 51302079
51300170 Standard solution conductivity 500 µs/cm
Mettler Toledo 51300170 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 51300170
Recommended products
Calibration solutions for TDS meters 3000 ppm
A solution of Na2SO4, Na2CO3, NaCl for calibrating conductivity meters and the total dissolved solids (salinity) of water.
SKU: 2974826, 2974849
51340030 Electrolyte for DX235-Cl electrode, 20 ml
Electrolyte to ensure stable operation of the DX235-Cl chloride ion selective electrode and to ensure accurate measurements of the concentration of chloride ions in solutions.
SKU: 51340030
51350062 ORP buffer 220 mV/pH7, 6 x 250mL
ORP buffer is a standard solution used to test the accuracy of ORP sensors (RedOX).
SKU: 51350062
30458274 buffer pH 1.679
Calibration solution with a pH value of 1.679. Bottle 250 ml.
SKU: 30458274
Ionic Strength Adjustor Sodium / Potassium (ISA), 100 pieces
Ionic Strength Regulator for Hach Ion Selective Electrodes.
SKU: 4451569
Buffer Solution, pH 9,23
Buffer Solution, concentration pH 9,23 ± 0,02, 500 mL.
SKU: S11M011
Certified Conductivity Standard Solution, 25 μS/cm, NaCl, 250 ml
Calibration solution for salt meters (TDS meter) and conductivity meters.
SKU: S51M013
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
