998 (90) 174-57-84
51343182 Electrolyte KNO3 1M; 25 ml
SKU: 51343182
Manufacturer: Mettler Toledo
Availability: Order only
Measurement using ion-selective electrodes (ISEs) is the easiest and most affordable way to determine the concentration of ions. The ISE must be filled with an appropriate electrolyte solution to ensure reliable operation of the electrode.
Solution 51343182 is recommended for use with Mettler Toledo DX Series electrodes for the determination of ammonium, potassium and nitrate.
Concentration 1 mol/l KNO3.
Volume 25 ml.
Specifications Recommended products
Specifications
Specifications
| Type | Filling solution |
Recommended products
ISE Ammonia Standard Solution, 1000 mg/L, 1 L
ISE Standard Solution. Ammonia, 1000 mg/L ±20 mg/L NH3-N. 1 L bottle.
SKU: 2354153
Compare
51350020 Calibration solution pH 7.00, 6 x 250 ml
Buffer solution with a pH value of 7.00 ± 0.02 for calibrating pH meters and electrodes.
SKU: 51350020
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
Calibration solution ph 4.01, 250 mL
Buffer solution with a standard pH value for calibrating and verifying the accuracy of pH electrodes and hydrogen ion meters.
SKU: LZW9463.99
HI7077L Electrode Oil and Grease Cleaner Solution (500 ml)
Specially formulated cleaning solution for removing oils and fats from the pH electrode.
SKU: HI7077L
51107894 Electrolyte for DX232-S 20 ml
Electrolyte for ion-selective electrode determining Sulfide ions.
SKU: 51107894
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Calibration solution for conductivity meter 147 μS/cm, KCl, 250 ml
Sodium chloride standard solution for checking the accuracy of the conductivity analysis procedure of the aqueous solution and the instrument being measured.
SKU: LZW9700.99
51350080 Electrolyte 3 mol/l KCl, 6 x 250 ml
A 3 mol/L potassium chloride (KCl) solution is commonly used as a filling solution for reference electrodes in various electrochemical measurements. The solution is important for maintaining the stable reference potential required for accurate measurements.
SKU: 51350080
HI7061L Universal pH Electrode Cleaning Solution (500 ml)
HI7061L is a general purpose cleaning solution for use with pH and ORP electrodes that can be used for a variety of applications.
SKU: HI7061L
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
HI7041S Electrolyte for Dissolved Oxygen Sensors
The HI7041S electrolyte is designed for Hanna Instruments polarographic dissolved oxygen sensors. The correct filling solution is critical to the performance of your Dissolved Oxygen Sensor.
SKU: HI7041S
30090855 Calcium standard solution 100 mg/l
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090855
30095315 All-in-One Kit 2 6x250 ml
The kit contains 250 ml vials with the following components: technical buffers pH 4.01, pH 7.00, pH 10.00, 3 mol/L KCl electrolyte, cleaning solution (pepsin) and InLab storage solution.
SKU: 30095315
ISE Ammonia Standard Solution, 10 mg/L, 500 mL
ISE Standard Solution. Ammonia, 10,0 mg/L ±0,5 mg/L NH3-N. 500 mL bottle.
SKU: 15349
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
KCl calibration solution for conductivity meters 146.9 μS/cm
Calibration solutions are designed to adjust the measurement accuracy of instruments when measuring the electrical conductivity of water.
SKU: 2974226, 2974249
Conductivity Standard Solution, 146,9 µS/cm
Calibration solution, concentration 146.9 μS/cm ± 2.5% at 25 °C / 0.001M KCl, 500 ml.
SKU: C20C280
51340030 Electrolyte for DX235-Cl electrode, 20 ml
Electrolyte to ensure stable operation of the DX235-Cl chloride ion selective electrode and to ensure accurate measurements of the concentration of chloride ions in solutions.
SKU: 51340030
30090853 Standard solution 100 mg/l (chloride)
The standard chloride solution for an ion selective electrode (ISE) is a solution with a precisely known concentration of chloride ions (Cl⁻). The solution is used to calibrate and test the efficiency of selective electrodes in relation to the concentration of chloride ions in the sample.
SKU: 30090853
HI70010P pH 10.01 Calibration Solution, 25 x 20 ml sachets
pH buffer for electrode calibration with a pH value of 10.01 ± 0.01 pH at 25°C
SKU: HI70010P
Recommended products
HI7033L Conductivity standard 84 µS/cm (500 ml bottle)
HI7033L is a superior conductivity standard with a conductivity value of 84 µS/cm, prepared from a potassium chloride solution, traceable to NIST.
SKU: HI7033L
HI6031 Conductivity standard 1413 µS/cm (500 ml)
HI6031 is a high quality 1413 µS/cm conductivity standard based on potassium chloride solution. Comes with a certificate of analysis.
SKU: HI6031
Cleaning solution for pH electrodes, RENOVO.X extra strong, 250 mL
Electrode cleaning solution, RENOVO.X extra strong Hach Lange.
SKU: S16M002
Powder Pillows buffer, pH 6.86, 15 pcs.
Calibration buffer for pH meter in powder form for dilution.
SKU: 1409895
HI7073L Cleansing Solution for Proteins
HI7073L is a solution for cleaning pH electrodes that come into contact with samples containing protein (food, biological samples). The volume of the bottle is 500 ml.
SKU: HI7073L
Powder Pillows buffer, pH 10.01 blue 250 pcs.
Standard for the calibration of electrodes. pH buffer in powder for dilution. The color coding is blue.
SKU: 2227164
51340036 Electrolyte for GSE Ammonia Electrode
Electrolyte to ensure stable operation and accurate measurements by the GSE Ammonia Electrode.
SKU: 51340036
51350022 Technical buffer pH 9.21, 6 x 250 ml
pH buffer for calibrating electrodes and pH meters.
SKU: 51350022
HI700670P Cleaning Solution for Salt Deposits (25 x 20 mL Sachets)
Cleaning solution for electrodes in easy-to-use sachets.
SKU: HI700670P
