998 (90) 174-57-84
Chloride Standard Solution, 100 mg/L, 1 L
SKU: 2370853
Manufacturer: Hach
Availability: Order only
ISE Standard Solution, Chloride.
Concentration: 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-.
1 L bottle.
Description Specifications Downloads Recommended products
Description
Description
Ion Selective Electrode (ISE) standard solutions for laboratory analyses.
ISE Chloride Standard Solution (2370853) from Hach. Concentration 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-.
Special remarks: Observed shelf life after opening, following recommended storage and use: 3 months.
- Design for use with Hach meters portfolio and other meters.
- Reliable packaging.
Summary of method: Chloride in the sample reacts with mercuric thiocyanate to form mercuric chloride and liberate thiocyanate ion. Thiocyanate ions react with the ferric ions to form an orange ferric thiocyanate complex. The amount of this complex is proportional to the chloride concentration. The measurement wavelength is 455 nm.
Specifications
| Application area | Wastewater, Drinking water, Process control |
| Industry | Ecology, Pulp and paper, Pharmaceutical, Glass, Power generation, Transport, Chemical, Food and Beverage, Municipal |
| Parameters | Chloride |
| Concentration | 100 mg/L Cl- |
| Quantity | 1 L |
| Shelf life | 5 years |
Downloads
 |
Working procedure: Chloride Standard Solution, 100 mg/L |  |
Recommended products
ORP buffer solution for calibration 200 mV, 500 ml
ORP reference solution used to calibrate the ORP sensor (in resealable plastic bottles).
SKU: 25M2A1001-115
Compare
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
51350026 Technical buffer pH 11.00, 6 x 250 ml
The package contains 6 bottles of 250 ml buffer solution.
SKU: 51350026
ISE Standard sodium solution (Na +) concentration 100 mg/l; volume 500 ml, 1 L
Standard Sodium Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 2318149, 2318153
Buffer Solution, pH 7,00
Buffer Solution, concentration pH 7,00± 0,02, 500 mL.
SKU: 1222249
51343180 Electrolyte KCl 3M 25 ml
Electrolyte for filling the ph electrode.
SKU: 51343180
Singlet Single-Use pH Buffer, pH 10,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 10,01 ±0.02 at 25°C. Pack of 20 of pH 10,01, 20 mL each.
SKU: 2770220
ORP / Redox calibration solution (ZoBell's solution)
Standard solution for calibration and accuracy verification of ORP electrodes.
SKU: 2316949
ISE Ammonia Standard Solution, 100 mg/L, 500 mL
ISE Standard Solution. Ammonia, 100 mg/L ±2 mg/L NH3-N. 500 mL bottle.
SKU: 2406549
109705 WTW Electrolyte KCl 3 mol/l
The electrolyte is used as a filling solution for refillable electrodes and as a storage solution for all types of pH electrodes.
SKU: 109705
Buffer Solution, pH 4,65
Buffer Solution, concentration pH 4,65 ± 0,02, 500 mL.
SKU: S11M010
Ionic Strength Adjustor Nitrate (ISA), 100 pieces
Ionic Strength Adjustor for Hach Ion Selective Electrodes.
SKU: 2984799
Chloride Standard Solution, 1000 mg/L, 500 mL
ISE Standard Solution. Chloride, 1000 mg/L ±10 mg/L Cl- (NIST). 500 mL bottle.
SKU: 18349
51340032 Electrolyte for DX240-Ca electrode, 20 ml
Electrolyte to ensure stable operation of the DX240-Ca Calcium ion selective electrode and to ensure accurate measurements of the concentration of Calcium ions in solutions.
SKU: 51340032
51350094 Conductivity standard 12.88 mS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350094
SKU: HI7072
Filling Solution, Reference, Saturated KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), Saturated, 59 mL bottle.
SKU: 25118026
30094617 Standard solution conductivity 5 µs/cm
Mettler Toledo 30094617 Conductivity Standard is a high quality reference solution with a known and accurate conductivity value. Used to calibrate and test the performance of meters (conductivity meters) and conductivity sensors.
SKU: 30094617
51107898 Electrolyte for DX327-I electrode
The electrolyte serves to create a stable and well defined electrochemical environment within the DX327-I ion selective electrode.
SKU: 51107898
30111134 Buffer pH 2.00 in sachets 30x20 ml
Disposable pH buffer sachets from Mettler Toledo. The solution is poured into the package under controlled conditions, ensuring a fresh and clean solution for every pH electrode calibration.
SKU: 30111134
NaCl solution for conductivity meter calibration 18000 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 2307442
Buffer solution, pH 4,01
Buffer Solution, concentration pH 4,01± 0,02, 500 mL.
SKU: 1222349
51350104 Electrode regeneration solution
Solution for the restoration of glass pH electrodes.
SKU: 51350104
NaCl solution for conductivity meter calibration 1990 μS/cm, 100 mL
Standard solution for tds and conductivity meters.
SKU: 210542
Recommended products
Filling Solution, ISENH3181, 0,1 M NH4Cl, 50 mL
Filling solution for Ammonia Ion Selective Electrode (ISENH3181), Ammonium Chloride (NH4Cl), 50 mL bottle.
SKU: 4447226
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
Calibration solutions for TDS meters 300 ppm
The solutions are designed to check the accuracy of measurement and calibration of devices in the analysis of conductivity and total salinity (salinity) of water.
SKU: 2974626, 2974649
51350064 ORP buffer 468 mV/pH 0.1; package 6 x 30 ml
Standard solution for calibrating and checking the accuracy of ORP electrodes.
SKU: 51350064
30090856 Calcium standard solution 10 mg/l Ca
A pre-mixed solution with an accurately known concentration of calcium (Ca) is commonly used to calibrate and verify the accuracy of ion selective electrodes.
SKU: 30090856
Certified Buffer Standard Solution, pH 7,000
Certified Buffer Standard Solution, pH 7,000 ±0.010 pH at 25°C, 500 mL.
SKU: S11M004
HI7061L Universal pH Electrode Cleaning Solution (500 ml)
HI7061L is a general purpose cleaning solution for use with pH and ORP electrodes that can be used for a variety of applications.
SKU: HI7061L
51350100 Pepsin-HCl cleaning solution, 250 ml
Hydrochloric acid solution with pepsin for cleaning electrodes.
SKU: 51350100
HI7007L buffer solution pH 7.01, volume 500 ml
pH 7.01 is the most widely used value of all buffer solutions.
SKU: HI7007L
