998 (90) 174-57-84
51340032 Electrolyte for DX240-Ca electrode, 20 ml
SKU: 51340032
Manufacturer: Mettler Toledo
Availability: Order only
Electrolyte 51340032 Mettler Toledo is designed to provide stable operation of the DX240-Ca ion selective electrode and accurate measurements of Calcium ion concentration in solutions. The volume of the bottle is 20 ml.
The solution also serves to protect the sensitive membrane from contaminants that may change the characteristics of the ion or interfere with its reaction with the membrane.
The right electrolyte ensures the long-term stability of the electrode, which is important for repeatable and accurate measurements.
Recommended products
Recommended products
51350092 Conductivity standard 1413 µS/cm, 250 ml
Solution for calibration and verification of devices that measure the electrical conductivity of solutions.
SKU: 51350092
Compare
Buffer Solution, pH 1,09
Buffer Solution, concentration pH 1,09 ± 0,02, 500 mL.
SKU: S11M009
Buffer solution pH 4.01, 125 mL
Calibration solution with standard pH value for pH meters and electrodes.
SKU: LZW9460.99
Conductivity standard solution, 1000 μS/cm, NaCl, 50 ml
NaCl (sodium chloride) standard solution for calibrating conductivity meters and sensors.
SKU: 1440026
51350102 pH electrode cleaning solution (thiourea)
Flushing with deionized water is not sufficient if silver sulfide contamination is present; In this case, it is recommended to use a cleaning solution with thiourea.
SKU: 51350102
30464188 pH 5.00 technical buffer solution
Buffer solution with a pH value of 5.00 ± 0.02 for calibrating pH electrodes.
SKU: 30464188
51350044 Certified buffer pH 7.00, 6 x 250 ml
Solution for pH electrodes calibration.
SKU: 51350044
Certified Conductivity Standard Solution, 111,3 mS/cm
Calibration solution for conductivity and TDS meters, concentration 111.3 mS/cm ± 0.5% (k = 2) at 25 °C, 500 ml.
SKU: S51M001
Ammonia Ionic Strength Adjustor (ISA) Powder Pillows, pk/100
Ammonia Ionic Strength Adjustor (ISA) for Ammonia determinations by Ion Selective Electrode (ISE) method. Ideal for low Ammonia level readings. Pack of 100 powder pillows.
SKU: 4447169
Calibration solution ph 10.01, 250 ml
PH buffer solution 10.01 ± 0.02 pH at 25 °C for checking the accuracy of pH meters and electrodes.
SKU: LZW9471.99
51300140 Tablets for preparing solutions with zero dissolved oxygen content
These tablets make it easy to prepare a zero dissolved oxygen solution. The resulting solution is then used to calibrate and verify accuracy when measuring low dissolved oxygen concentrations.
SKU: 51300140
Powder Pillows buffer pH 10.01 (blue), 15 pcs
Sealed bags with powder for pH electrode calibration.
SKU: 2227195
Singlet Single-Use pH Buffer, pH 4,01
pH Buffer Standard Solution for pH electrode calibration. Sealed foil pouches of pH buffers. pH is 4,01 ±0.02 at 25°C. Pack of 20 of pH 4,01 pH, 20 mL each.
SKU: 2770020
Buffer solution pH 7.00, 125 mL
Calibration solution for pH meters and electrodes.
SKU: LZW9461.98
51302068 Rainbow I pH Buffer Set
A set of pH calibration solutions in sachets for single use.
SKU: 51302068
Conductivity Standard Solution, 12,88 mS/cm
Calibration solution for conductivity meters, concentration 12.88 mS/cm ± 1% at 25 °C / 0.1M KCl, 500 ml.
SKU: C20C250
ORP calibration solution in ampoules (Light's solution)
Light's solution in ampoules for calibration of ORP meters. The package contains 20 ampoules of 20 ml.
SKU: 2612520
Calibration solutions for TDS meters 30 ppm
Solutions are designed to adjust the measurement accuracy of devices when measuring conductivity and total dissolved solids (salinity) of water.
SKU: 2974526, 2974549
ISE standard solution, nitrate (NO3-N) concentration 10 mg/l; volume 500 ml
Standard Nitrate Ion Selective Electrode (ISE) solution for laboratory analysis.
SKU: 30749
51107881 Electrolyte for DX207-Li 20 ml
Electrolyte for ion-selective electrode determining lithium ions.
SKU: 51107881
51343181 Electrolyte KCl 1 mol/l 25 ml
Made from the highest quality reagents to ensure optimum performance of your electrode.
SKU: 51343181
HI70300L pH electrode storage solution (500 ml)
HI70300L is an electrode storage solution formulated with chemicals that can be used to keep your pH and ORP electrodes performing optimally. When the pH electrode is stored properly in solution, the glass membrane is well hydrated, which ensures proper functioning and accurate readings.
SKU: HI70300L
51344754 PerfectION electrolyte E, 5x60 ml
perfectION Mettler Toledo ion selective electrode filling solution for determining potassium concentrations.
SKU: 51344754
ISE Ammonia Standard Solution, 1 mg/L, 500 mL
ISE Standard Solution. Ammonia, 1,00 mg/L ±0.03 mg/L NH3-N. 500 mL bottle.
SKU: 189149
Recommended products
Conductivity calibration solution 12.88 mS/cm, KCl, 125 mL
Standard conductivity solution. 12.88 mS/cm ± 0.11 mS/cm @ 25 °C. Potassium chloride (KCl) (0.1 M). Bottle 125 ml.
SKU: LZW9721.99
30111136 Buffer pH 4.006 sachets 30x20 ml
Sealed sachets with fresh pH buffer solution for single use.
SKU: 30111136
51302049 Conductivity standard 1413 µS/cm, sachets 30x20ml
A solution with a standard conductivity value of 1413 µS/cm for calibrating conductivity sensors.
SKU: 51302049
Filling Solution, Reference, 2,44 M KCl, 59 mL
Filling solution for electrode reference element, Potassium Chloride (KCl), 2,44 M, 59 mL bottle.
SKU: 2965026
Chloride Standard Solution, 100 mg/L, 1 L
ISE Standard Solution. Chloride, 0,00282 mol/L ± 0.00003 mol/L / 100 mg/L ±1 mg/L Cl-. 1 L bottle.
SKU: 2370853
51107885 Electrolyte for DX224-Mg 20 ml
Electrolyte for ion-selective electrode determining Magnesium ions.
SKU: 51107885
HI70630L Acidic solution for cleaning pH electrodes from fats
HI70630L is an effective acidic cleaning solution specially designed for pH electrodes to be immersed in fat containing samples.
SKU: HI70630L
108702 WTW TEP 7: Technical buffer solution, pH 7.00 (1 liter)
Buffer solution for pH meters calibration. Ph value is 7.00
SKU: 108702
51344761 PerfectION calcium ISA, 475 ml
Ionic strength adjuster for obtaining accurate readings from an ion-selective electrode that determines the concentration of calcium.
SKU: 51344761
